Real-time Reservoir Management from Data Acquisition through Implementation: Closed-Loop Approach

Author(s):  
Saeed Mohammed Al-Mubarak
SPE Journal ◽  
2007 ◽  
Vol 12 (02) ◽  
pp. 156-166 ◽  
Author(s):  
Xian-Huan Wen ◽  
Wen H. Chen

Summary The concept of "closed-loop" reservoir management is currently receiving considerable attention in the petroleum industry. A "real-time" or "continuous" reservoir model updating technique is a critical component for the feasible application of any closed-loop, model-based reservoir management process. This technique should be able to rapidly and continuously update reservoir models assimilating the up-to-date observations of production data so that the performance predictions and the associated uncertainty are up-to-date for optimization of future development/operations. The ensemble Kalman filter (EnKF) method has been shown to be quite efficient for this purpose in large-scale nonlinear systems. Previous studies show that a relatively large ensemble size is required for EnKF to reliably assess the uncertainty, and a confirming step is recommended to ensure the consistency of the updated static and dynamic variables with the flow equations. In this paper, we further explore the capability of EnKF, focusing on some practical issues including the correction of the linear and Gaussian assumptions during filter updating with iteration, the reduction of ensemble size with a resampling scheme, and the impact of data assimilation time interval. Results from the example in this paper demonstrate that the proposed iterative EnKF performs better with more accurate predictions and less uncertainty than the traditional noniterative EnKF. The use of iteration reduces the impact of nonlinearity and non-Gaussianity. Results also show that iteration may only be required when predictions are considerably deviated from the observations. The proposed resampling scheme can significantly reduce the ensemble size necessary for reliable assessment of uncertainty with improved accuracy. Finally, we show that the noniterative EnKF is sensitive to the size of time interval between the assimilation steps. Using the proposed iterative EnKF, results are more stable, more accurate reservoir models and predictions can be obtained even when a large time interval is used. This also indicates that iteration within the EnKF updating serves as a process that corrects the stronger nonlinear and non-Gaussian behaviors when larger time interval is used. Introduction Reservoir models have become an important part of day-to-day decision analysis related to management of oil/gas fields. The closed-loop reservoir management concept (Jansen et al. 2005) allows real-time decisions to be made that maximize the production potential of a reservoir. These decisions are based on the most current information available about the reservoir model and the associated uncertainty of the information. One critical requirement in this real-time, model-based reservoir management process is the ability to rapidly estimate the reservoir models and the associated uncertainty reflecting the most current production data in a real-time fashion. Based on a number of studies, the EnKF method was shown to be well-suited for such applications compared to the traditional history-matching (HM) methods (Evensen 1999; Gu and Oliver 2006; Wen and Chen 2006).


2005 ◽  
Author(s):  
Harry Funk ◽  
Robert Goldman ◽  
Christopher Miller ◽  
John Meisner ◽  
Peggy Wu

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5209 ◽  
Author(s):  
Andrea Gonzalez-Rodriguez ◽  
Jose L. Ramon ◽  
Vicente Morell ◽  
Gabriel J. Garcia ◽  
Jorge Pomares ◽  
...  

The main goal of this study is to evaluate how to optimally select the best vibrotactile pattern to be used in a closed loop control of upper limb myoelectric prostheses as a feedback of the exerted force. To that end, we assessed both the selection of actuation patterns and the effects of the selection of frequency and amplitude parameters to discriminate between different feedback levels. A single vibrotactile actuator has been used to deliver the vibrations to subjects participating in the experiments. The results show no difference between pattern shapes in terms of feedback perception. Similarly, changes in amplitude level do not reflect significant improvement compared to changes in frequency. However, decreasing the number of feedback levels increases the accuracy of feedback perception and subject-specific variations are high for particular participants, showing that a fine-tuning of the parameters is necessary in a real-time application to upper limb prosthetics. In future works, the effects of training, location, and number of actuators will be assessed. This optimized selection will be tested in a real-time proportional myocontrol of a prosthetic hand.


2021 ◽  
Vol 1 (1) ◽  
Author(s):  
E. Bertino ◽  
M. R. Jahanshahi ◽  
A. Singla ◽  
R.-T. Wu

AbstractThis paper addresses the problem of efficient and effective data collection and analytics for applications such as civil infrastructure monitoring and emergency management. Such problem requires the development of techniques by which data acquisition devices, such as IoT devices, can: (a) perform local analysis of collected data; and (b) based on the results of such analysis, autonomously decide further data acquisition. The ability to perform local analysis is critical in order to reduce the transmission costs and latency as the results of an analysis are usually smaller in size than the original data. As an example, in case of strict real-time requirements, the analysis results can be transmitted in real-time, whereas the actual collected data can be uploaded later on. The ability to autonomously decide about further data acquisition enhances scalability and reduces the need of real-time human involvement in data acquisition processes, especially in contexts with critical real-time requirements. The paper focuses on deep neural networks and discusses techniques for supporting transfer learning and pruning, so to reduce the times for training the networks and the size of the networks for deployment at IoT devices. We also discuss approaches based on machine learning reinforcement techniques enhancing the autonomy of IoT devices.


J ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 147-153
Author(s):  
Paula Morella ◽  
María Pilar Lambán ◽  
Jesús Antonio Royo ◽  
Juan Carlos Sánchez

Among the new trends in technology that have emerged through the Industry 4.0, Cyber Physical Systems (CPS) and Internet of Things (IoT) are crucial for the real-time data acquisition. This data acquisition, together with its transformation in valuable information, are indispensable for the development of real-time indicators. Moreover, real-time indicators provide companies with a competitive advantage over the competition since they enhance the calculus and speed up the decision-making and failure detection. Our research highlights the advantages of real-time data acquisition for supply chains, developing indicators that would be impossible to achieve with traditional systems, improving the accuracy of the existing ones and enhancing the real-time decision-making. Moreover, it brings out the importance of integrating technologies 4.0 in industry, in this case, CPS and IoT, and establishes the main points for a future research agenda of this topic.


Sign in / Sign up

Export Citation Format

Share Document