A Well Productivity Program In Pemex E&P Increases Oil Production In Short Time And Low Cost

2007 ◽  
Author(s):  
Jorge Alberto Arevalo Villagran ◽  
Teodulo Gutierrez Acosta
Keyword(s):  
Low Cost ◽  
Oil Production ◽  
Well Productivity ◽  
Short Time

Low-Cost Hardware Implementation of Human Blood Identification Device Using Feed-Forward Artificial Neural Network on FPGA

2018 ◽  
Author(s):  
Rizki Eka Putri ◽  
Denny Darlis
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Low Cost ◽  
Image Resolution ◽  
Blood Type ◽  
Feed Forward ◽  
Testing Facility ◽  
System Input ◽  
Artificial Neural ◽  
Short Time

This article was under review for ICELTICS 2018 -- In the medical world there is still service dissatisfaction caused by lack of blood type testing facility. If the number of tested blood arise, a lot of problems will occur so that electronic devices are needed to determine the blood type accurately and in short time. In this research we implemented an Artificial Neural Network on Xilinx Spartan 3S1000 Field Programable Gate Array using XSA-3S Board to identify the blood type. This research uses blood sample image as system input. VHSIC Hardware Discription Language is the language to describe the algorithm. The algorithm used is feed-forward propagation of backpropagation neural network. There are 3 layers used in design, they are input, hidden1, and output. At hidden1layer has two neurons. In this study the accuracy of detection obtained are 92%, 92%, 92%, 90% and 86% for 32x32, 48x48, 64x64, 80x80, and 96x96 pixel blood image resolution, respectively.

Robust Test Method of TSOP PEMs for Space Application

2019 ◽  
Author(s):  
Yasunobu Iwai ◽  
Koichi Shinozaki ◽  
Daiki Tanaka
Keyword(s):  
Evaluation Method ◽  
Low Cost ◽  
Reliability Evaluation ◽  
Test Method ◽  
Thermal Shock Test ◽  
Space Application ◽  
Space Applications ◽  
Limit Test ◽  
Long Time ◽  
Short Time

Abstract Compared with space parts, consumer parts are highly functional, low cost, compact and lightweight. Therefore, their increased usage in space applications is expected. Prior testing and evaluation on space applicability are necessary because consumer parts do not have quality guarantees for space application [1]. However, in the conventional reliability evaluation method, the test takes a long time, and the problem is that the robustness of the target sample can’t be evaluated in a short time. In this report, we apply to the latest TSOP PEM (Thin Small Outline Package Plastic Encapsulated Microcircuit) an evaluation method that combines preconditioning and HALT (Highly Accelerated Limit Test), which is a test method that causes failures in a short time under very severe environmental conditions. We show that this method can evaluate the robustness of TSOP PEMs including solder connections in a short time. In addition, the validity of this evaluation method for TSOP PEM is shown by comparing with the evaluation results of thermal shock test and life test, which are conventional reliability evaluation methods.

New Gel Aggregates To Improve Sweep Efficiency During Waterflooding

2011 ◽  
Vol 14 (01) ◽  
pp. 120-128 ◽  
Author(s):  
Guanglun Lei ◽  
Lingling Li ◽  
Hisham A. Nasr-El-Din
Keyword(s):  
Low Cost ◽  
Oil Production ◽  
High Water ◽  
Resistance Factor ◽  
Water Production ◽  
Sweep Efficiency ◽  
Low Viscosity ◽  
Productivity Decline ◽  
High Water Cut ◽  
Water Cut

Summary A common problem for oil production is excessive water production, which can lead to rapid productivity decline and significant increases in operating costs. The result is often a premature shut-in of wells because production has become uneconomical. In water injectors, the injection profiles are uneven and, as a result, large amounts of oil are left behind the water front. Many chemical systems have been used to control water production and improve recovery from reservoirs with high water cut. Inorganic gels have low viscosity and can be pumped using typical field mixing and injection equipment. Polymer or crosslinked gels, especially polyacrylamide-based systems, are mainly used because of their relatively low cost and their supposed selectivity. In this paper, microspheres (5–30 μm) were synthesized using acrylamide monomers crosslinked with an organic crosslinker. They can be suspended in water and can be pumped in sandstone formations. They can plug some of the pore throats and, thus, force injected water to change its direction and increase the sweep efficiency. A high-pressure/high-temperature (HP/HT) rheometer was used to measure G (elastic modulus) and G" (viscous modulus) of these aggregates. Experimental results indicate that these microspheres are stable in solutions with 20,000 ppm NaCl at 175°F. They can expand up to five times their original size in deionized water and show good elasticity. The results of sandpack tests show that the microspheres can flow through cores with permeability greater than 500 md and can increase the resistance factor by eight to 25 times and the residual resistance factor by nine times. The addition of microspheres to polymer solutions increased the resistance factor beyond that obtained with the polymer solution alone. Field data using microspheres showed significant improvements in the injection profile and enhancements in oil production.

scholarly journals Superior Antireflection Coating for a Silicon Cell with a Micronanohybrid Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Hsi-Chien Liu ◽  
Gou-Jen Wang
Keyword(s):  
Solar Cell ◽  
Silicon Solar Cell ◽  
Low Cost ◽  
Antireflection Coating ◽  
Light Spectrum ◽  
Two Stage ◽  
Liquid Diffusion ◽  
Pyramid Structure ◽  
Short Time ◽  
Structure Array

The object of this paper is to develop a high antireflection silicon solar cell. A novel two-stage metal-assisted etching (MAE) method is proposed for the fabrication of an antireflective layer of a micronanohybrid structure array. The processing time for the etching on an N-type high-resistance (NH) silicon wafer can be controlled to around 5 min. The resulting micronanohybrid structure array can achieve an average reflectivity of 1.21% for a light spectrum of 200–1000 nm. A P-N junction on the fabricated micronanohybrid structure array is formed using a low-cost liquid diffusion source. A high antireflection silicon solar cell with an average efficiency of 13.1% can be achieved. Compared with a conventional pyramid structure solar cell, the shorted circuit current of the proposed solar cell is increased by 73%. The major advantage of the two-stage MAE process is that a high antireflective silicon substrate can be fabricated cost-effectively in a relatively short time. The proposed method is feasible for the mass production of low-cost solar cells.

scholarly journals Tracking the Evolution of Riverbed Morphology on the Basis of UAV Photogrammetry

2021 ◽  
Vol 13 (4) ◽  
pp. 829
Author(s):  
Teresa Gracchi ◽  
Guglielmo Rossi ◽  
Carlo Tacconi Stefanelli ◽  
Luca Tanteri ◽  
Rolando Pozzani ◽  
...  
Keyword(s):  
Management Practices ◽  
Low Cost ◽  
3D Models ◽  
Vegetation Coverage ◽  
Detection Analysis ◽  
Digital Terrain ◽  
Fluvial Dynamics ◽  
Aerial Vehicle ◽  
One Year ◽  
Short Time

Unmanned aerial vehicle (UAV) photogrammetry has recently become a widespread technique to investigate and monitor the evolution of different types of natural processes. Fluvial geomorphology is one of such fields of application where UAV potentially assumes a key role, since it allows for overcoming the intrinsic limits of satellite and airborne-based optical imagery on one side, and in situ traditional investigations on the other. The main purpose of this paper was to obtain extensive products (digital terrain models (DTMs), orthophotos, and 3D models) in a short time, with low costs and at a high resolution, in order to verify the capability of this technique to analyze the active geomorphic processes on a 12 km long stretch of the French–Italian Roia River at both large and small scales. Two surveys, one year apart from each other, were carried out over the study area and a change detection analysis was performed on the basis of the comparison of the obtained DTMs to point out and characterize both the possible morphologic variations related to fluvial dynamics and modifications in vegetation coverage. The results highlight how the understanding of different fluvial processes may be improved by appropriately exploiting UAV-based products, which can thus represent a low-cost and non-invasive tool to crucially support decisionmakers involved in land management practices.

Implementation of a Rig Test for Rotor/Stator Interaction of Low-Pressure Compressor Blades and Comparison of Experimental Results With Numerical Model

2020 ◽  
Author(s):  
Laura Pacyna ◽  
Alexandre Bertret ◽  
Alain Derclaye ◽  
Luc Papeleux ◽  
Jean-Philippe Ponthot
Keyword(s):  
Low Cost ◽  
Low Pressure ◽  
Angular Speed ◽  
Compressor Blades ◽  
Abradable Coating ◽  
Rotor Stator Interaction ◽  
Blade Tip ◽  
Numerical Tool ◽  
Short Time ◽  
Pressure Compressor

Abstract To investigate the contact phenomenon between the blade tip and the abradable coated casing, a rig test was designed and built. This rig test fills the following constraints: simplification of the low-pressure compressor environment but realistic mechanical conditions, ability to test several designs in short time, at low cost and repeatability. The rig test gives the opportunity to investigate the behavior of different blade designs regarding the sought phenomenon, to refine and mature the phenomenon comprehension and to get data for the numerical tool validation. The numerical tool considers a 3D finite elements model of low-pressure compressor blades with a surrounding rigid casing combined with a specialized model to take into account the effects of the wear of the abradable coating on the blade dynamics. Numerical results are in good agreement with tests in terms of: critical angular speed, blade dynamics and wear pattern on the abradable coated casing.

scholarly journals An Application of Integrated 3D Technologies for Replicas in Cultural Heritage

2019 ◽  
Vol 8 (6) ◽  
pp. 285 ◽  
Author(s):  
Balletti ◽  
Ballarin
Keyword(s):  
3D Printing ◽  
Cultural Heritage ◽  
Laser Scanning ◽  
Low Cost ◽  
Three Dimensional ◽  
Digital Data ◽  
Survey Analysis ◽  
Critical Issues ◽  
Data Acquisition And Processing ◽  
Short Time

In recent decades, 3D acquisition by laser scanning or digital photogrammetry has become one of the standard methods of documenting cultural heritage, because it permits one to analyze the shape, geometry, and location of any artefact without necessarily coming into contact with it. The recording of three-dimensional metrical data of an asset allows one to preserve and monitor, but also to understand and explain the history and cultural heritage shared. In essence, it constitutes a digital archive of the state of an artefact, which can be used for various purposes, be remodeled, or kept safely stored. With the introduction of 3D printing, digital data can once again take on material form and become physical objects from the corresponding mathematical models in a relatively short time and often at low cost. This possibility has led to a different consideration of the concept of virtual data, no longer necessarily linked to simple visual fruition. The importance of creating high-resolution physical copies has been reassessed in light of different types of events that increasingly threaten the protection of cultural heritage. The aim of this research is to analyze the critical issues in the production process of the replicas, focusing on potential problems in data acquisition and processing and on the accuracy of the resulting 3D printing. The metric precision of the printed model with 3D technology are fundamental for everything concerning geomatics and must be related to the same characteristics of the digital model obtained through the survey analysis.

scholarly journals Improving the economic efficiency of oil productionat the “Gazpromneft-Khantos” fields

2021 ◽  
Vol 6 (3) ◽  
pp. 136-143
Author(s):  
Rustam N. Asmandiyarov ◽  
Stanislav Yu. Barkalov ◽  
Rail R. Galeev ◽  
Rustam R. Gumerov ◽  
Yuri A. Katkov ◽  
...  
Keyword(s):  
Economic Efficiency ◽  
Large Scale ◽  
Oil Production ◽  
Project Teams ◽  
Factors Affecting ◽  
Technical And Economic Analysis ◽  
Production Technologies ◽  
The Cross ◽  
Functional Teams ◽  
Short Time

Aim. As part of a large-scale business transformation, Gazprom Neft is implementing new approaches to improving economic efficiency. One of such approaches is the launch of the “Renovation” project program, the purpose of which is to achieve maximum profitability of the basic well stock. The article describes the results of the study and formation of a set of measures to improve the economic efficiency of oil production at the fields of Gazpromneft-Khantos. Materials and methods. The key feature of “Renovation” is that the goal setting and the formation of key performance indicators of project teams are made not from the previously achieved result, but from the potential. To do this, a detailed technical and economic analysis of the factors affecting the profitability of oil production is first carried out, and the potential for increasing profitability is determined. After that, hypotheses are worked out to increase the economic efficiency of production and a set of measures is formed to realize the identified potential. The cross-functional teams of the “Renovation” program projects are formed around the core-team that includes specialists in geology, development, production, engineering, energy management, economics and IT. This allows teams to solve non-standard tasks in a short time, in a complex way, without attracting external leverage, which is an absolute competitive advantage. Results. The program of optimization measures developed by the cross-functional team of the Renovation project will provide the potential for the growth of the profitability of Gazpromneft-Khantos in the period from 2021 to 2030. Conclusions. The article presents the developed and implemented cases on reducing operating costs in various areas — geology and reservoir engineering, energy efficiency, oil production technologies, downhole operations and hydraulic fracturing, oilfield chemistry.

scholarly journals Comparison of Direct Inoculation and Copan Transport Systems for Isolation of Neisseria gonorrhoeaefrom Endocervical Specimens

1999 ◽  
Vol 37 (11) ◽  
pp. 3583-3585 ◽  
Author(s):  
C. C. Olsen ◽  
J. R. Schwebke ◽  
W. H. Benjamin ◽  
A. Beverly ◽  
K. B. Waites
Keyword(s):  
Transport System ◽  
Low Cost ◽  
Transmitted Disease ◽  
Ease Of Use ◽  
Transport Systems ◽  
Sexually Transmitted ◽  
Sexually Transmitted Disease Clinic ◽  
Direct Inoculation ◽  
Short Time ◽  
Culture Positive

Two commercial swab transport systems, Copan Amies gel agar with and without charcoal (Copan Diagnostics, Corona, Calif.), were compared to direct inoculation onto modified Thayer-Martin medium for detection of Neisseria gonorrhoeae in 1,490 endocervical specimens obtained from women attending a sexually transmitted disease clinic. Copan swabs were held in the transport system for 24 h at room temperature prior to inoculation onto modified Thayer-Martin medium. All cultures were incubated at 35°C in 5% CO2, and bacteria were identified on the basis of Gram stain, oxidase, and biochemical reactions. Copan Amies gel agar transport system without charcoal detected 77 of 81 (95%) direct inoculation culture-positive specimens, and Copan Amies gel agar transport system with charcoal detected 53 of 56 (95%) directly inoculated culture-positive specimens. Copan Amies gel agar without charcoal inoculated after 6 h supported growth of 56 (98%) positive cultures out of only 55 directly inoculated culture-positive specimens. This study demonstrates that Copan swabs represent a reasonable alternative, providing convenience, low cost, and ease of use while still maintaining a satisfactory recovery rate of N. gonorrhoeae from clinical specimens, if specimens can be inoculated onto selective media within a relatively short time period not involving overnight shipment.

Sign in / Sign up

Export Citation Format

Share Document