Improved Oil Recovery by Application of Sound Waves to Water Flooding

2007 ◽  
Author(s):  
Mohammed Amro ◽  
Mohammed Abdullah Al Mobarky ◽  
Emad Solaiman Al-Homadhi
Keyword(s):  
Oil Recovery ◽  
Water Flooding ◽  
Sound Waves ◽  
Improved Oil Recovery

Study on Performance Evaluation of Dispersed Particle Gel for Improved Oil Recovery

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Qing You ◽  
Caili Dai ◽  
Yongchun Tang ◽  
Ping Guan ◽  
Guang Zhao ◽  
...  
Keyword(s):  
Relative Permeability ◽  
Oil Recovery ◽  
Injection Pressure ◽  
Water Flooding ◽  
Improved Oil Recovery ◽  
Hydrocarbon Recovery ◽  
Heterogeneous Reservoirs ◽  
Atomic Force ◽  
Segregated Flow ◽  
Oil Flow

This work investigates the performance of dispersed particle gel (DPG) by core flow tests including injectivity, selective plugging, thermal stability, and improved oil recovery (IOR). Results showed that the resistance factor is small when DPG was injected, but obviously became larger while turning into brine water flooding. Both the oil and water relative permeability were reduced and greater reduction appeared in water relative permeability. DPG could block water flow without affecting oil flow, and oil–water segregated flow mechanism was proposed to explain this selective plugging. The injection pressure increases, caused by strong plugging due to the DPG aggregation aging in high temperature, which was consistent with the observation of atomic force microscope (AFM) photos. The DPG could effectively block high permeability zone and produce oil from low permeability zone, which could provide a practical way to enhance hydrocarbon recovery while reducing water production for extremely heterogeneous reservoirs.

Optimized Salinity Water Flooding as an Improved Oil Recovery IOR Scheme in the Niger Delta

2020 ◽  
Author(s):  
David Alaigba ◽  
Onaiwu Oduwa ◽  
Ikponmwosa Ohenhen ◽  
Olalekan Olafuyi
Keyword(s):  
Oil Recovery ◽  
Niger Delta ◽  
Water Flooding ◽  
Improved Oil Recovery ◽  
Salinity Water

scholarly journals Development of Proxy Models for Screening Water Flood and Gas Flood Candidates

2021 ◽  
pp. 51-57
Author(s):  
Moyosore, Olanipekun ◽  
Akpabio, Julius U. ◽  
Isehunwa, Sunday O.
Keyword(s):  
Oil Recovery ◽  
Gas Injection ◽  
Water Injection ◽  
Screening Method ◽  
Water Flooding ◽  
Improved Oil Recovery ◽  
Screening Criteria ◽  
Recovery Techniques ◽  
Oil Formation Volume Factor ◽  
Proxy Models

Fluid-flood and other improved oil recovery techniques are becoming prominent in global petroleum production because a large proportion of production is from mature oil fields. Although water flooding and gas injection are well established techniques in the industry, several of the screening criteria in literature are discipline which could sometimes be subjective. This work used experimental design techniques to develop proxy models for predicting oil recovery under water-flood and gas-flood conditions. The objective of the study is to develop a quantitative screening method that would allow for candidates to be evaluated and ranked for water flood or gas injection. The model was applied to some field cases and compared with published models and the well-known Welge Analysis method. The coefficient constants for the oil formation volume factor for water flooding and gas injection was 0.0139 and 0.0434 respectively. Similarly, the coefficient constants for water injection and gas injection for the generated proxy model was -2.34* 10-8 and -6.1 *10-5 respectively. The results show that the proxy models developed are quite robust and can be used for first pass screening of water and gas flood candidates. 

Improved oil recovery by raw water injection using horizontal wells

2009 ◽  
Vol 49 (1) ◽  
pp. 453
Author(s):  
Pavel Bedrikovetsky ◽  
Mohammad Afiq ab Wahab ◽  
Gladys Chang ◽  
Antonio Luiz Serra de Souza ◽  
Claudio Alves Furtado
Keyword(s):  
Oil Recovery ◽  
Filter Cake ◽  
Produced Water ◽  
Water Injection ◽  
Horizontal Wells ◽  
Water Flooding ◽  
Sweep Efficiency ◽  
Improved Oil Recovery ◽  
The North ◽  
Reservoir Simulator

Injectivity formation damage with water-flooding using sea/produced water has been widely reported in the North Sea, the Gulf of Mexico and the Campos Basin in Brazil. The damage is due to the capture of solid/liquid particles by the rock with consequent permeability decline; it is also due to the formation of a low permeable external filter cake. Yet, moderate injectivity decline is not too damaging with long horizontal injectors where the initial injectivity is high. In this case, injection of raw or poorly treated water would save money on water treatment, which is not only cumbersome but also an expensive procedure in offshore projects. In this paper we investigate the effects of injected water quality on waterflooding using horizontal wells. It was found that induced injectivity damage results in increased sweep efficiency. The explanation of the phenomenon is as follows: injectivity rate is distributed along a horizontal well non-uniformly; water advances faster from higher rate intervals resulting in early breakthrough; the retained particles plug mostly the high permeability channels and homogenise the injectivity profile along the well. An analytical model for injectivity decline accounting for particle capture and a low permeable external filter cake formation has been implemented into the Eclipse 100 reservoir simulator. It is shown that sweep efficiency in a heterogeneous formation can increase by up to 5% after one pore volume injected, compared to clean water injection.

Influence of chemical composition of mixing water on the gelation of inorganic polymer technology for improved oil recovery

2017 ◽  
Vol 3 (3) ◽  
pp. 33-38 ◽  
Author(s):  
А.V. Аntuseva ◽  
Е.F. Kudina ◽  
G.G. Pechersky ◽  
Y.R. Kuskildina ◽  
А.V., Melgui ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Oil Recovery ◽  
Inorganic Polymer ◽  
Improved Oil Recovery ◽  
Mixing Water

Technologies for improved oil recovery by deep cleaning of the bottom-hole zone of wells with RBS-3 and DGK-2 reagents

2020 ◽  
Vol 7 ◽  
pp. 116-119
Author(s):  
R.N. Fakhretdinov ◽  
◽  
D.F. Selimov ◽  
A.A. Fatkullin ◽  
S.A. Tastemirov ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Improved Oil Recovery ◽  
Bottom Hole
Sign in / Sign up

Export Citation Format

Share Document