scholarly journals Researches on manufacture of pulp by nitric acid method

1946 ◽  
Vol 2 (2) ◽  
pp. 73-76
Author(s):  
Isao Shimoda ◽  
Masako Kotani
Keyword(s):  
1947 ◽  
Vol 20 (1) ◽  
pp. 315-319 ◽  
Author(s):  
J. F. Morley ◽  
J. R. Scott

Abstract From the experiments described, it appears that neither the bromine method nor the nitric acid method is perfectly satisfactory, for the following reasons. (1) Neither method gives the true free sulfur in rubbers containing sulfur-bearing accelerators, as these cause positive errors of anything up to 0.2–0.3 per cent. (2) The nitric acid method does not give the true free sulfur in rubbers, without sulfur-bearing accelerators, because the result includes some of the sulfur combined with the rubber “resins” the tests do not show definitely whether this applies also to the bromine method. (3) Neither method gives the total sulfur in the acetone extract, since some of the sulfur combined with the “resins” is not included in the result; the presence of certain sulfur-bearing accelerators increases the error. The statement previously referred to (loc. cit.), that the bromine method approximates more nearly to the elementary sulfur content and the nitric acid method more nearly to the total sulfur content of the extract, appears to be a correct generalization. In most cases, however, the difference between the results obtained by the two methods would be less than 0.1 per cent. In respect of simplicity and rapidity of working, the bromine method has the advantage over the nitric acid method, and therefore in all ordinary circumstances is the one to be recommended.


Author(s):  
Scott A. Boerner ◽  
Crescent R. Isham ◽  
Yean Kit Lee ◽  
Jennifer D. Tibodeau ◽  
Scott H. Kaufmann ◽  
...  

2015 ◽  
Vol 17 (3) ◽  
pp. 1884-1892 ◽  
Author(s):  
Guoqiang Zou ◽  
Wenzhou Zhong ◽  
Liqiu Mao ◽  
Qiong Xu ◽  
Jiafu Xiao ◽  
...  

A novel hollow-structured Mn/TS-1 catalyst has been reported as a non-nitric acid route for adipic acid production from oxidative cleavage of cyclohexanone.


1941 ◽  
Vol 14 (1) ◽  
pp. 241-248 ◽  
Author(s):  
J. B. Roberts

Abstract A simple, accurate method for the determination of free carbon in either raw or vulcanized rubber is presented. It has replaced the nitric acid method entirely in the laboratory of the United States Rubber Company, Detroit, Michigan. A study of the effects of interfering substances, and numerous comparisons of results by the cresol and the nitric acid methods, are given. Results by the cresol method, in the absence of interfering substances, are within 1 per cent of the calculated free carbon content. The method requires only simple apparatus readily available.


1972 ◽  
Vol 58 (14) ◽  
pp. 2067-2077 ◽  
Author(s):  
Kazuo KAWAMURA ◽  
Shiro WATANABE ◽  
Tokio SUZUKI
Keyword(s):  

1949 ◽  
Vol 5 (2) ◽  
pp. 79-82
Author(s):  
Isao Shimoda
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document