Gold and Porphyry Cu–Mo Mineralization of the Bumbat Ore Cluster and Its Relationship with the Early Paleozoic Magmatism of the Lake Zone (Western Mongolia)

2021 ◽  
Vol 62 (1) ◽  
pp. 121-133
Author(s):  
A.S. Borisenko ◽  
I.V. Gas’kov ◽  
V.V. Babich ◽  
A.A. Borovikov
Keyword(s):  
Gold Mineralization ◽  
Vein Quartz ◽  
Copper Ore ◽  
Quartz Veins ◽  
Porphyry Cu ◽  
Lake Zone ◽  
Geochemical Studies ◽  
Content Of Gold ◽  
Ore District ◽  
Gold Bearing

Abstract ––Geological, mineralogical, and geochemical studies of copper and gold mineralization in the Bumbat ore district of Mongolia have shown its association with igneous rocks of different ages formed under different geodynamic, geologic, and geochemical conditions. Copper ore occurrences (site 98 and Altan Gadas site) with an age of 518.0 ± 4.9 Ma have similar mineralogical and geochemical features and seem to be related to plagiogranite-porphyry stocks formed at the late island arc stage (524.5 Ma). The ores were deposited from weakly concentrated solutions with a low content of СО2 at 240–230 °С under subsurface conditions. The association of mineralization with plagiogranites, its localization predominantly in veins, and its essentially copper composition, with high contents of Zn, Mn, Ba, and, in some samples, Ag and Bi, permit us to assign this mineralization to the vein quartz–sulfide type. Its commercial value has yet to be assessed. Gold mineralization of the Three Hills and Darvi sites formed later (455.9 ± 4.3 Ma), during the formation of the final granitoid phases at the accretion–collision stage (511–465 Ma). These sites are mineralized crushing zones composed of hydrothermally altered rocks of sericite–quartz composition with veinlet and disseminated (stockwork) sulfide mineralization and gold-bearing quartz veins. The content of gold in the ores varies from tenths to tens of ppm, and its fineness varies from 700 to 1000‰. The ores of both sites have high contents of Cu, Zn, Mn, Ba, and, in places, Mo. Mineralization formed from hydrothermal solutions with TDS = 9.5–12.0 wt.% NaCl eq. at medium temperatures (230–300 °C) under subsurface conditions. The above specific features of gold mineralization are typical of the flank zones of porphyry Cu–(Mo) deposits.

scholarly journals Carbonic fluids in the Hamadi gold deposit, Sudan: origin and contribution to gold mineralization

2017 ◽  
Vol 54 (5) ◽  
pp. 494-511 ◽  
Author(s):  
Xi-hui Cheng ◽  
Jiu-hua Xu ◽  
Jian-xiong Wang ◽  
Qing-po Xue ◽  
Hui Zhang
Keyword(s):  
Gold Deposit ◽  
Melting Temperature ◽  
Fluid Inclusions ◽  
Gold Mineralization ◽  
Narrow Range ◽  
Shear Zones ◽  
Quartz Veins ◽  
Wide Range ◽  
Homogenization Temperatures ◽  
Gold Bearing

The Hamadi gold deposit is located in North Sudan, and occurs in the Neoproterozoic metamorphic strata of the Arabian–Nubian Shield. Two types of gold mineralization can be discerned: gold-bearing quartz veins and altered rock ores near ductile shear zones. The gold-bearing quartz veins are composed of white to gray quartz associated with small amounts of pyrite and other polymetallic sulfide minerals. Wall-rock alterations include mainly beresitization, epidotization, chloritization, and carbonatization. CO2-rich inclusions are commonly seen in gold-bearing quartz veins and quartz veinlets from gold-bearing altered rocks; these include mainly one-phase carbonic (CO2 ± CH4 ± N2) inclusions and CO2–H2O inclusions with CO2/H2O volumetric ratios of 30% to ∼80%. Laser Raman analysis does not show the H2O peak in carbonic inclusions. In quartz veins, the melting temperature of solid CO2 (Tm,CO2) of carbonic inclusions has a narrow range of −59.6 to −56.8 °C. Carbonic inclusions also have CO2 partial homogenization temperatures (Th,CO2) of −28.3 to +23.7 °C, with most of the values clustering between +4.0 and +20 °C; all of these inclusions are homogenized into the liquid CO2 state. The densities range from 0.73 to 1.03 g/cm3. XCH4 of carbonic fluid inclusions ranges from 0.004 to 0.14, with most XCH4 around 0.05. In CO2–H2O fluid inclusions, Tm,CO2 values are recorded mostly at around −57.5 °C. The melting temperature of clathrate is 3.8–8.9 °C. It is suggested that the lowest trapping pressures of CO2 fluids would be 100 to ∼400 MPa, on the basis of the Th,CO2 of CO2-bearing one-phase (LCO2) inclusions and the total homogenization temperatures (Th,tot) of paragenetic CO2-bearing two-phase (LCO2–LH2O) inclusions. For altered rocks, the Tm,CO2 of the carbonic inclusions has a narrow range of −58.4 to ∼−57.0 °C, whereas the Th,CO2 varies widely (−19 to ∼+29 °C). Most carbonic inclusions and the carbonic phases in the CO2–H2O inclusions are homogenized to liquid CO2 phases, which correspond to densities of 0.70 to ∼1.00 g/cm3. Fluid inclusions in a single fluid inclusion assemblage (FIA) have narrow Tm,CO2 and Th,CO2 values, but they vary widely in different FIAs and non-FIAs, which indicates that there was a wide range of trapping pressure and temperature (P–T) conditions during the ore-forming process in late retrograde metamorphism after the metamorphism peak period. The carbonic inclusions in the Hamadi gold deposit are interpreted to have resulted from unmixing of an originally homogeneous aqueous–carbonic mixture during retrogress metamorphism caused by decreasing P–T conditions. CO2 contributed to gold mineralization by buffering the pH range and increasing the gold concentration in the fluids.

scholarly journals Metamorphic rock-hosted orogenic gold deposit style at Bombana (Southeast Sulawesi) and Buru Island (Maluku): Their key features and significances for gold exploration in Eastern Indonesia

2017 ◽  
Vol 2 (2) ◽  
pp. 124 ◽  
Author(s):  
Arifudin Idrus ◽  
Sukamandaru Prihatmoko ◽  
Ernowo Harjanto ◽  
Franz Michael Meyer ◽  
Irzal Nur ◽  
...  
Keyword(s):  
Fluid Inclusions ◽  
Metamorphic Rock ◽  
Gold Mineralization ◽  
Gold Deposits ◽  
High Grade ◽  
Quartz Veins ◽  
Gold Exploration ◽  
Eastern Indonesia ◽  
Key Features ◽  
Gold Bearing

In Indonesia, gold is commonly mined from epithermal-, porphyry-, and skarn-type deposits that are commonly found in volcanic belts along island arcs or active continental margin settings. Numerous gold prospects, however, were recently discovered in association with metamorphic rocks. This paper focuses on metamorphic rock-hosted gold mineralization in Eastern Indonesia, in particular the Bombana (SE Sulawesi) and Buru Island (Maluku) prospects. At Bombana, gold-bearing quartz-veins are hosted by the Pompangeo metamorphic complex. Sheared, segmented veins vary in thickness from 2 cm to 2 m. Gold is mainly present in the form of ‘free gold’ among silicate minerals and closely related to cinnabar, stibnite, tripuhyite, and in places, minor arsenopyrite. The gold distribution is erratic, however, ranging from below detection limit up to 134 g/t. At least three generations of veins are identified. The first is parallel to the foliation, the second crosscuts the first generation of veins as well as the foliation, and the late-stage laminated deformed quartz-calcite vein represents the third mineralization stage. The early veins are mostly massive to crystalline, occasionally brecciated, and sigmoidal, whereas the second-stage veins are narrower than the first ones and less subjected to brecciation. Gold grades in the second- and third-stage veins are on average higher than that in the earlier veins. Microthermometric and Raman spectrometric studies of fluid inclusions indicate abundant H2O-NaCl and minor H2O-NaCl-CO2 fluids. Homogenization temperatures and salinities vary from 114 to 283 ºC and 0.35 to 9.08 wt.% NaCl eq., respectively. Crush-leach analysis of fluid inclusions suggests that the halogen fluid chemistry is not identical to sea water, magmatic or epithermal related fluids, but tends to be similar to fluids in mesothermal-type gold deposits. In Buru Island (Gunung Botak and Gogorea prospects), two distinct generations of quartz veins are identified. Early quartz veins are segmented, sigmoidal discontinuous and parallel to the foliation of the host rock. This generation of quartz veins is characterized by crystalline relatively clear quartz, and weakly mineralized with low sulfide and gold contents. The second type of quartz veins occurs within the ‘mineralized zone’ of about 100 m in width and ~1,000 m in length. Gold mineralization is intensely overprinted by argillic alteration. The mineralization-alteration zone is probably parallel to the mica schist foliation and strongly controlled by N-S or NE-SW-trending structures. Gold-bearing quartz veins are characterized by banded texture particularly following host rock foliation and sulphide banding, brecciated and rare bladed-like texture. Alteration types consist of propylitic (chlorite, calcite, sericite), argillic and carbonation represented by graphite banding and carbon flakes. Ore mineral comprises pyrite, native gold, pyrrhotite, and arsenopyrite. Cinnabar and stibnite are present in association with gold. Ore chemistry indicates that 11 out of 15 samples yielded more than 1 g/t Au, in which 6 of them graded in excess of 3 g/t Au. All high-grade samples are composed of limonite or partly contain limonitic material. This suggests the process of supergene enrichment. Interestingly, most of the high-grade samples contain also high concentrations of As (up to 991ppm), Sb (up to 885ppm), and Hg (up to 75ppm). Fluid inclusions in both quartz vein types consist of 4 phases including L-rich, V-rich, L-V-rich and L1-L2-V (CO2)-rich phases. The mineralizing hydrothermal fluid typically is CO2-rich, of moderate temperature (300-400 ºC), and low salinity (0.36 to 0.54 wt.% NaCl eq). Based on those key features, gold mineralization in Bombana and Buru Island tends to meet the characteristics of orogenic, mesothermal types of gold deposit. Metamorphic rock-hosted gold deposits could represent the new targets for gold exploration particularly in Eastern Indonesia.

scholarly journals New perspective Reza gold deposit (Gedabek ore district, Lesser Caucasus, Azerbaijan)

2021 ◽  
Vol 30 (1) ◽  
pp. 53-64
Author(s):  
Nazim A. Imamverdiyev ◽  
Vasif M. Baba-zadeh ◽  
Samir S. Mursalov ◽  
Anar A. Valiyev ◽  
Mamoy I. Mansurov ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Gold Mineralization ◽  
High Sulfidation ◽  
Gold Grade ◽  
Lesser Caucasus ◽  
New Perspective ◽  
Exploration Area ◽  
A Minor ◽  
Ore District ◽  
Gold Bearing

The article describes Reza gold deposit of Ugur exploration area located in Geda- bek Ore District of the Lesser Caucasus in NW of Azerbaijan. It is established that main mineralization in the Reza gold deposit consists of hematite-barite-quartz-kaoline veins- veinlets and breccia, pyrite stock-stockverk and quartz-sulfide veins. On the main orebody surface center secondary quartzites with vein-veinlets barite-hematite mineralization have occured over which remain accumulations of hydrous ferric oxides cementing breccias of quartz and secondary quartzites. “Reddish mass” is also observed in erosion parts, being an oxidation product of stock and stockverk limonite-hematite ores. Representing typical gossans, these accumulations by the data of trenches for thickness about 5-10 m contain gold 0.3-3.5 ppm and silver 1.0-45.0 ppm. There are three zones of gold mineralization within the Reza gold deposit: oxide mineralization; transition zone mineralization; sulfide mineralization. The oxide gold mineraliza- tion consists of clay-gravel weathering crust of kaolinite type. The gold-bearing mineralization has been oxidized to a depth of ap- proximately 50-100 meters. Typically, the gold mineralization is coarser and a minor increase in gold grade occurs within the oxides compared to the original rocks. The nugget effect increase in the gold grade of the oxides does not exceed approximately 10%. Deposit alteration signature has characteristics which suggest the current outcrop level may be near the top of a mineralized, gold-bearing high sulfidation epithermal (HSE) system. The gold mineralization at the deposit is interpreted as forming in shallow high sulfidation epith- ermal systems. The mineralization has been noted in well-confined hydrothermal breccia and associated with pyrite stock-stockwork. The majority of the deposit material and current estimates are formed within the barite-hematite-quartz-kaoline mineralization in the secondary quartzite rocks. The main brecciation and stockwork are hosted within secondary quartzite, sometime massive silicified andesite porphyritic rocks.

scholarly journals Quartz Rb-Sr Isochron Ages of Two Type Orebodies from the Nibao Carlin-type Gold Deposit, Guizhou, China

Minerals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 399 ◽  
Author(s):  
Zheng ◽  
Yang ◽  
Gao ◽  
Chen ◽  
Liu ◽  
...  
Keyword(s):  
Low Temperature ◽  
Gold Deposit ◽  
Fluid Inclusions ◽  
Large Scale ◽  
Gold Mineralization ◽  
Gold Deposits ◽  
Quartz Veins ◽  
Golden Triangle ◽  
Mineralization Age ◽  
Gold Bearing

The Nibao gold deposit, which includes both fault-controlled and strata-bound gold orebodies, constitutes an important part of the Yunnan–Guizhou–Guangxi “Golden Triangle” region. Defining the mineralization age of these gold orebodies may provide additional evidence for constraining the formation ages of low-temperature orebodies and their metallogenic distribution in South China. Petrographic studies of gold-bearing pyrites and ore-related quartz veins indicate that these pyrites coexist with quartz or filled in vein-like quartz, which suggests a possible genetic relationship between the two from Nibao gold deposit. Minerals chemistry shows that Rb and Sr are usually hosted in fluid inclusions in quartz ranging from 0.0786 to 2.0760 ppm and 0.1703 to 2.1820 ppm, respectively. The Rb–Sr isotopic composition of gold-bearing quartz-hosted fluid inclusions from the Nibao gold deposit were found to have Rb–Sr isochron ages of 142 ± 3 and 141 ± 2 Ma for both fault-controlled and strata-bound orebodies, respectively, adding more evidence to previous studies and thus revealing a regional gold mineralization age of 148–134 Ma. These results also confirm the Middle-Late Yanshanian mineralizing events of Carlin-type gold deposits in Yunnan, Guizhou, and Guangxi Provinces of Southwest China. In addition, previous studies indicated that antimony deposits in the region which were formed at ca. 148–126 Ma have a close affinity with gold deposits. This illustrates that the regional low-temperature hydrothermal gold mineralization is related in space and time to the Yanshanian (ca. 146–115 Ma) magmatic activity. Specifically, the large-scale gold and antimony mineralization are considered to be inherently related to mantle-derived mafic and ultramafic magmatic rocks associated with an extensional tectonic environment. Based on the initial 87Sr/86Sr ratios of 0.70844 ± 0.00022 (2σ) and 0.70862 ± 0.00020 (2σ) for gold-bearing quartz veins from fault-controlled and strata-bound gold orebodies, respectively, at the Nibao gold deposit, as well as the C, H, O, and S isotopic characteristics of gold deposits located in the Golden Triangle region, we suggest that the mantle-derived material can be involved in the formation of the Nibao gold deposit and that the ore-forming fluid can be derived from a mixed crust–mantle source.

scholarly journals Origin and Characteristics of the Shwetagun Deposit, Modi Taung-Nankwe Gold District and the Kunzeik and Zibyaung Deposits, Kyaikhto Gold District in Mergui Belt, Myanmar: Implications for Fluid Source and Orogenic Gold Mineralization

2021 ◽  
Vol 9 ◽  
Author(s):  
Myo Kyaw Hlaing ◽  
Kotaro Yonezu ◽  
Khin Zaw ◽  
Aung Zaw Myint ◽  
May Thwe Aye ◽  
...  
Keyword(s):  
Native Gold ◽  
Gold Mineralization ◽  
Shear Zones ◽  
Wall Rock ◽  
Gold Deposits ◽  
Orogenic Gold ◽  
Salinity Range ◽  
Quartz Veins ◽  
Economic Significance ◽  
Gold Bearing

The Mergui Belt of Myanmar is endowed with several important orogenic gold deposits, which have economic significance and exploration potential. The present research is focused on two gold districts, Modi Taung-Nankwe and Kyaikhto in the Mergui Belt comparing their geological setting, ore and alteration mineralogy, fluid inclusion characteristics, and ore-forming processes. Both of the gold districts show similarities in nature and characteristics of gold-bearing quartz veins occurring as sheeted veins, massive veins, stockworks to spider veinlets. These gold deposits are mainly hosted by the mudstone, slaty mudstone, greywacke sandstone, slate, and slaty phyllite of Mergui Group (dominantly of Carboniferous age). The gold-bearing quartz veins generally trend from NNE to N-S, whereas some veins strike NW-SE in all deposits. The gold-bearing quartz veins are mainly occurred within the faults and shear zones throughout the two gold districts. Wall-rock alterations at Shwetagun are mainly silicification, chloritization, and sericitization, whereas in Kyaikhto, silicification, carbonation, as well as chloritization, and sericitization are common. At Shwetagun, the gold occurred as electrum grains in fractures within the veins and sulfides. In Kyaikhto, the quartz-carbonate-sulfide and quartz-sulfide veins appeared to have formed from multiple episodes of gold formation categorizing mainly as free native gold grains in fractures within the veins or invisible native gold and electrum within sulfides. At Shwetagun, the ore minerals in the auriferous quartz veins include pyrite, galena, and sphalerite, with a lesser amount of electrum, chalcopyrite, arsenopyrite, chlorite, and sericite. In Kyaikhto, the common mineralogy associated with gold mineralization is pyrite, chalcopyrite, sphalerite, galena, pyrrhotite, arsenopyrite, marcasite, magnetite, hematite, ankerite, calcite, chlorite, epidote, albite, and sericite. At Shwetagun, the mineralization occurred at a varying temperature from 250 to 335°C, with a salinity range from 0.2 to 4.6 wt% NaCl equivalent. The Kyaikhto gold district was formed from aqueous–carbonic ore fluids of temperatures between 242 and 376°C, low to medium salinity (<11.8 wt% NaCl equivalent), and low CO2 content. The ore-forming processes of the Shwetagun deposit in the Modi Taung-Nankwe gold district and the Kyaikhto gold district are remarkably comparable to those of the mesozonal orogenic gold systems.

scholarly journals Re–Os Pyrite Geochronological Evidence of Three Mineralization Styles within the Jinchang Gold Deposit, Yanji–Dongning Metallogenic Belt, Northeast China

Minerals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 448 ◽  
Author(s):  
Shun-Da Li ◽  
Zhi-Gao Wang ◽  
Ke-Yong Wang ◽  
Wen-Yan Cai ◽  
Da-Wei Peng ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Northeast China ◽  
Gold Mineralization ◽  
Metallogenic Belt ◽  
Isotopic Analyses ◽  
Mantle Sources ◽  
Stage 1 ◽  
Geochronological Evidence ◽  
Gold Bearing

The Jinchang gold deposit is located in the eastern Yanji–Dongning Metallogenic Belt in Northeast China. The orebodies of the deposit are hosted within granite, diorite, and granodiorite, and are associated with gold-mineralized breccia pipes, disseminated gold in ores, and fault-controlled gold-bearing veins. Three paragenetic stages were identified: (1) early quartz–pyrite–arsenopyrite (stage 1); (2) quartz–pyrite–chalcopyrite (stage 2); and (3) late quartz–pyrite–galena–sphalerite (stage 3). Gold is hosted predominantly within pyrite. Pyrite separated from quartz–pyrite–arsenopyrite cement within the breccia-hosted ores (Py1) yield a Re–Os isochron age of 102.9 ± 2.7 Ma (MSWD = 0.17). Pyrite crystals from the quartz–pyrite–chalcopyrite veinlets (Py2) yield a Re–Os isochron age of 102.0 ± 3.4 Ma (MSWD = 0.2). Pyrite separated from quartz–pyrite–galena–sphalerite veins (Py3) yield a Re–Os isochron age of 100.9 ± 3.1 Ma (MSWD = 0.019). Re–Os isotopic analyses of the three types of auriferous pyrite suggest that gold mineralization in the Jinchang Deposit occurred at 105.6–97.8 Ma (includes uncertainty). The initial 187Os/188Os values of the pyrites range between 0.04 and 0.60, suggesting that Os in the pyrite crystals was derived from both crust and mantle sources.

Predictive geochemistry of ore gold in Eastern Transbaikalia

2020 ◽  
Vol 26 (10) ◽  
pp. 6-14
Author(s):  
Yu. Pavlenko ◽  
Keyword(s):  
Gold Mineralization ◽  
Geological Mapping ◽  
Earth’S Crust ◽  
Natural Environments ◽  
Gold Concentration ◽  
Gold Ore ◽  
Natural Concentration ◽  
Eastern Transbaikalia ◽  
Earth's Crust ◽  
Gold Bearing

The subject of the research is the methods of forecasting the Eastern Transbaikalia - a large mining region of Russia, in which the main internal and external criteria for ore content are established by modern geological mapping at a scale of 1:1,000,000. The article considers endogenous geochemical criteria for gold concentration in the Earth’s crust of the region, which constitute a mandatory methodological method for predicting gold ore objects at any scale. The aim of the work is to clarify the achieved level of knowledge about the mineralogical and geochemical criteria for gold concentration in the course of the evolution of the Earth’s crust up to the formation of industrial deposits and the isolation of ore formations. The methodology of the study is to systematize a huge amount of factual material concerning the processes of natural concentration of gold, to analyze its representativeness, to assess the completeness and reliability of published and stock information used to clarify the mineralogical and geochemical criteria for predicting ore gold. Using the chemical properties of gold, the forms of finding gold, amount of it in the forming geological complexes and natural environments, their evolution, distribution in structural and tectonic zones, some causes of concentration and mineralogical and geochemical prediction criteria are considered. Special attention is paid to the need to study and account for nanoscale (dispersed) gold. As the main ore-formation units of gold mineralization, standardized ore formations are defined with a division into gold ore proper, complex gold-bearing and gold-bearing and geological and industrial types of deposits. There are 15 geological and industrial types, of which 13 are transbaikal deposits standards and two are attracted from other regions. These types of deposits differ in the number of objects related to them. Due to some similarity in the composition of ore matter, geological and industrial types differ in the most important classification characteristics for the forecast. Areas of distribution of direct and indirect mineralogical and geochemical features grouped into mineralogical and geochemical forecast criteria are promising for endogenous concentration of gold mineralization

Sign in / Sign up

Export Citation Format

Share Document