Basement-involved inversion at the Appalachian structural front, western Newfoundland: an interpretation of seismic reflection data with implications for petroleum prospectivity

2004 ◽  
Vol 52 (3) ◽  
pp. 215-233 ◽  
Author(s):  
Glen S. Stockmal ◽  
Art Slingsby ◽  
John W.F. Waldron
Keyword(s):  
Seismic Reflection ◽  
Hanging Wall ◽  
Normal Fault ◽  
Hydrocarbon Exploration ◽  
Normal Faults ◽  
Apparent Magnitude ◽  
Seismic Reflection Data ◽  
The Public ◽  
Reflection Data ◽  
New Interpretation

Abstract Recent hydrocarbon exploration in western Newfoundland has resulted in six new wells in the Port au Port Peninsula area. Port au Port No.1, drilled in 1994/95, penetrated the Cambro-Ordovician platform and underlying Grenville basement in the hanging wall of the southeast-dipping Round Head Thrust, terminated in the platform succession in the footwall of this basement-involved inversion structure, and discovered the Garden Hill petroleum pool. The most recent well, Shoal Point K-39, was drilled in 1999 to test a model in which the Round Head Thrust loses reverse displacement to the northeast, eventually becoming a normal fault. This model hinged on an interpretation of a seismic reflection survey acquired in 1996 in Port au Port Bay. This survey is now in the public domain. In our interpretation of these data, the Round Head Thrust is associated with another basement-involved feature, the northwest-dipping Piccadilly Bay Fault, which is mapped on Port au Port Peninsula. Active as normal faults in the Taconian foreland, both these faults were later inverted during Acadian orogenesis. The present reverse offset on the Piccadilly Bay Fault was previously interpreted as normal offset on the southeast-dipping Round Head Thrust. Our new interpretation is consistent with mapping on Port au Port Peninsula and north of Stephenville, where all basement-involved faults are inverted and display reverse senses of motion. It also explains spatially restricted, enigmatic reflections adjacent to the faults as carbonate conglomerates of the Cape Cormorant Formation or Daniel’s Harbour Member, units associated with inverted thick-skinned faults. The K-39 well, which targeted the footwall of the Round Head Thrust, actually penetrated the hanging wall of the Piccadilly Bay Fault. This distinction is important because the reservoir model invoked for this play involved preferential karstification and subsequent dolomitization in the footwalls of inverted thick-skinned faults. The apparent magnitude of structural inversion across the Piccadilly Bay Fault suggests other possible structural plays to the northeast of K-39.

Quantitative analysis of fault and fold growth in a salt-bearing transtensional basins: the Sørvestsnaget Basin, Western Barents Sea

2020 ◽  
pp. SP495-2020-123
Author(s):  
Thomas B. Kristensen ◽  
Atle Rotevatn ◽  
Maria Marvik ◽  
Gijs A. Henstra ◽  
Rob L. Gawthorpe ◽  
...  
Keyword(s):  
Barents Sea ◽  
Hanging Wall ◽  
Structural Evolution ◽  
Normal Fault ◽  
Growth Patterns ◽  
Hydrocarbon Exploration ◽  
Normal Faults ◽  
Lateral Migration ◽  
Seismic Reflection Data ◽  
Economic Implications

AbstractThe growth of faults and folds in basins formed under transtension has been less studied than in their extensional counterparts. In this study, we capitalise on 3D seismic reflection data to investigate the evolution of faults and folds that evolved coevally during sub-orthogonal partitioned extension and shortening, respectively, in the Sørvestsnaget Basin, Western Barents Sea. We use quantitative techniques to constrain the distribution of normal fault throw, shortening accommodated by folds and thrusts, and stratigraphic thickness variations, to analyse the relative temporal and spatial evolution of faults and folds. Our results show that normal faults display a similar evolution to those occurring in extensional basins, where they grew by lateral- and dip-linkage of individual fault segments as well as upward propagation. Notably, we show that shortening-related fold growth affected the fault growth patterns, skewing their throw distributions, and shifting the location of accommodation away from the evolving folds. Thus, fold amplification caused lateral migration of normal fault hanging-wall depocentres. Our results shed new light on fault and fold growth processes in transtensional basins and contributes to an improved understanding of the structural evolution of basins forming along sheared continental margins, which has economic implications for sheared-margin basins targeted for hydrocarbon exploration.

scholarly journals A snapshot of the earliest stages of normal fault development

2021 ◽  
Author(s):  
Ahmed Alghuraybi ◽  
Rebecca Bell ◽  
Chris Jackson
Keyword(s):  
Seismic Reflection ◽  
Spatial Scales ◽  
Normal Fault ◽  
Normal Faults ◽  
3D Seismic ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Temporal And Spatial ◽  
Fault Growth ◽  
Lateral Propagation

Despite decades of study, models for the growth of normal faults lack a temporal framework within which to understand how these structures accumulate displacement and lengthen through time. Here, we use borehole and high-quality 3D seismic reflection data from offshore Norway to quantify the lateral (0.2-1.8 mmyr-1) and vertical (0.004-0.02 mmyr-1) propagation rates (averaged over 12-44 Myr) for several long (up to 43 km), moderate displacement (up to 225 m) layer-bound faults that we argue provide a unique, essentially ‘fossilised’ snapshot of the earliest stage of fault growth. We show that lateral propagation rates are 90 times faster than displacement rates during the initial 25% of their lifespan suggesting that these faults lengthened much more rapidly than they accrued displacement. Although these faults have slow displacement rates compared with data compiled from 30 previous studies, they have comparable lateral propagation rates. This suggests that the unusual lateral propagation to displacement rate ratio is likely due to fault maturity, which highlights a need to document both displacement and lateral propagation rates to further our understanding of how faults evolve across various temporal and spatial scales.

scholarly journals Seismic reflection data reveal the 3D structure of the newly discovered Exmouth Dyke Swarm, offshore NW Australia

2020 ◽  
Author(s):  
Craig Magee ◽  
Christopher A.-L. Jackson
Keyword(s):  
Seismic Reflection ◽  
Surface Deformation ◽  
3D Structure ◽  
Sedimentary Basins ◽  
Dyke Swarm ◽  
Normal Faults ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Dyke Swarms ◽  
Nw Australia

Abstract. Dyke swarms are common on Earth and other planetary bodies, comprising arrays of dykes that can extend for 10's to 1000's of kilometres. The vast extent of such dyke swarms, and their rapid emplacement, means they can significantly influence a variety of planetary processes, including continental break-up, crustal extension, resource accumulation, and volcanism. Determining the mechanisms driving dyke swarm emplacement is thus critical to a range of Earth Science disciplines. However, unravelling dyke swarm emplacement mechanics relies on constraining their 3D structure, which is extremely difficult given we typically cannot access their subsurface geometry at a sufficiently high enough resolution. Here we use high-quality seismic reflection data to identify and examine the 3D geometry of the newly discovered Exmouth Dyke Swarm, and associated structures (i.e. dyke-induced normal faults and pit craters), in unprecedented detail. The latest Jurassic dyke swarm is located on the Gascoyne Margin offshore NW Australia and contains numerous dykes that are > 170 km long, potentially > 500 km long. The mapped dykes are distributed radially across a 39° arc centred on the Cuvier Margin; we infer this focal area marks the source of the dyke swarm, which was likely a mantle plume. We demonstrate seismic reflection data provides unique opportunities to map and quantify dyke swarms in 3D in sedimentary basins, which can allow us to: (i) recognise dyke swarms across continental margins worldwide and incorporate them into models of basin evolution and fluid flow; (ii) test previous models and hypotheses concerning the 3D structure of dyke swarms; (iii) reveal how dyke-induced normal faults and pit craters relate to dyking; and (iv) unravel how dyking translates into surface deformation.

Normal fault growth and segment linkage in a gravitationally detached delta system: evidence from 3D seismic reflection data from the Ceduna Sub-basin, Great Australian Bight

2015 ◽  
Vol 55 (2) ◽  
pp. 467
Author(s):  
Alexander Robson ◽  
Rosalind King ◽  
Simon Holford
Keyword(s):  
Seismic Reflection ◽  
Fault Plane ◽  
Structural Evolution ◽  
Normal Fault ◽  
Fault System ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Listric Fault ◽  
Dip Angle ◽  
Fault Growth

The authors used three-dimensional (3D) seismic reflection data from the central Ceduna Sub-Basin, Australia, to establish the structural evolution of a linked normal fault assemblage at the extensional top of a gravitationally driven delta system. The fault assemblage presented is decoupled at the base of a marine mud from the late Albian age. Strike-linkage has created a northwest–southeast oriented assemblage of normal fault segments and dip-linkage through Santonian strata, which connects a post-Santonian normal fault system to a Cenomanian-Santonian listric fault system. Cenomanian-Santonian fault growth is on the kilometre scale and builds an underlying structural grain, defining the geometry of the post-Santonian fault system. A fault plane dip-angle model has been created and established through simplistic depth conversion. This converts throw into fault plane dip-slip displacement, incorporating increasing heave of a listric fault and decreasing in dip-angle with depth. The analysis constrains fault growth into six evolutionary stages: early Cenomanian nucleation and radial growth of isolated fault segments; linkage of fault segments by the latest Cenomanian; latest Santonian Cessation of fault growth; erosion and heavy incision during the continental break-up of Australia and Antarctica (c. 83 Ma); vertically independent nucleation of the post-Santonian fault segments with rapid length establishment before significant displacement accumulation; and, continued displacement into the Cenozoic. The structural evolution of this fault system is compatible with the isolated fault model and segmented coherent fault model, indicating that these fault growth models do not need to be mutually exclusive to the growth of normal fault assemblages.

scholarly journals Seismic reflection data reveal the 3D structure of the newly discovered Exmouth Dyke Swarm, offshore NW Australia

Solid Earth ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 579-606 ◽  
Author(s):  
Craig Magee ◽  
Christopher Aiden-Lee Jackson
Keyword(s):  
Seismic Reflection ◽  
Surface Deformation ◽  
3D Structure ◽  
Dyke Swarm ◽  
Normal Faults ◽  
Borehole Data ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Dyke Swarms ◽  
Nw Australia

Abstract. Dyke swarms are common on Earth and other planetary bodies, comprising arrays of dykes that can extend laterally for tens to thousands of kilometres. The vast extent of such dyke swarms, and their presumed rapid emplacement, means they can significantly influence a variety of planetary processes, including continental break-up, crustal extension, resource accumulation, and volcanism. Determining the mechanisms driving dyke swarm emplacement is thus critical to a range of Earth Science disciplines. However, unravelling dyke swarm emplacement mechanics relies on constraining their 3D structure, which is difficult given we typically cannot access their subsurface geometry at a sufficiently high enough resolution. Here we use high-quality seismic reflection data to identify and examine the 3D geometry of the newly discovered Exmouth Dyke Swarm, and associated structures (i.e. dyke-induced normal faults and pit craters). Dykes are expressed in our seismic reflection data as ∼335–68 m wide, vertical zones of disruption (VZD), in which stratal reflections are dimmed and/or deflected from sub-horizontal. Borehole data reveal one ∼130 m wide VZD corresponds to an ∼18 m thick, mafic dyke, highlighting that the true geometry of the inferred dykes may not be fully captured by their seismic expression. The Late Jurassic dyke swarm is located on the Gascoyne Margin, offshore NW Australia, and contains numerous dykes that extend laterally for > 170 km, potentially up to > 500 km, with spacings typically < 10 km. Although limitations in data quality and resolution restrict mapping of the dykes at depth, our data show that they likely have heights of at least 3.5 km. The mapped dykes are distributed radially across a ∼39∘ wide arc centred on the Cuvier Margin; we infer that this focal area marks the source of the dyke swarm. We demonstrate that seismic reflection data provide unique opportunities to map and quantify dyke swarms in 3D. Because of this, we can now (i) recognise dyke swarms across continental margins worldwide and incorporate them into models of basin evolution and fluid flow, (ii) test previous models and hypotheses concerning the 3D structure of dyke swarms, (iii) reveal how dyke-induced normal faults and pit craters relate to dyking, and (iv) unravel how dyking translates into surface deformation.

scholarly journals Hydraulic fracturing in thick shale basins: problems in identifying faults in the Bowland and Weald Basins, UK

2016 ◽  
Author(s):  
David K. Smythe
Keyword(s):  
Hydraulic Fracturing ◽  
Seismic Reflection ◽  
Upper Jurassic ◽  
Normal Faults ◽  
Regulatory Regime ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Unconventional Resource ◽  
The Uk

Abstract. North American shale basins differ from their European counterparts in that the latter are one to two orders of magnitude smaller in area, but correspondingly thicker, and are cut or bounded by normal faults penetrating from the shale to the surface. There is thus an inherent risk of groundwater resource contamination via these faults during or after unconventional resource appraisal and development. US shale exploration experience cannot simply be transferred to the UK. The Bowland Basin, with 1900 m of Lower Carboniferous shale, is in the vanguard of UK shale gas development. A vertical appraisal well to test the shale by hydraulic fracturing (fracking), the first such in the UK, triggered earthquakes. Re-interpretation of the 3D seismic reflection data, and independently the well casing deformation data, both show that the well was drilled through the earthquake fault, and did not avoid it, as concluded by the exploration operator. Faulting in this thick shale is evidently difficult to recognise. The Weald Basin is a shallower Upper Jurassic unconventional oil play with stratigraphic similarities to the Bakken play of the Williston Basin, USA. Two Weald licensees have drilled, or have applied to drill, horizontal appraisal wells based on inadequate 2D seismic reflection data coverage. I show, using the data from the one horizontal well drilled to date, that one operator failed identify two small but significant through-going normal faults. The other operator portrayed a seismic line as an example of fault-free structure, but faulting had been smeared out by reprocessing. The case histories presented show that: (1) UK shale exploration to date is characterised by a low degree of technical competence, and (2) regulation, which is divided between four separate authorities, is not up to the task. If UK shale is to be exploited safely: (1) more sophisticated seismic imaging methods need to be developed and applied to both basins, to identify faults in shale with throws as small as 4–5 m, and (2) the current lax and inadequate regulatory regime must be overhauled, unified, and tightened up.

scholarly journals Sevier Fault at Red Canyon

Geosites ◽  
2019 ◽  
Vol 1 ◽  
pp. 1-6
Author(s):  
Robert Biek
Keyword(s):  
Lava Flow ◽  
Fault Zone ◽  
Hanging Wall ◽  
Slip Rate ◽  
Normal Fault ◽  
Coarse Grained ◽  
Seismic Reflection Data ◽  
The North ◽  
Total Displacement ◽  
Reflection Data

The Sevier fault is spectacularly displayed on the north side of Utah Highway 12 at the entrance to Red Canyon, where it offsets a 500,000-year-old basaltic lava flow. The fault is one of several active, major faults that break apart the western margin of the Colorado Plateau in southwestern Utah. The Sevier fault is a “normal” fault, a type of fault that forms during extension of the earth’s crust, where one side of the fault moves down relative to the other side. In this case, the down-dropped side (the hanging wall) is west of the fault; the upthrown side (the footwall) lies to the east. The contrasting colors of rocks across the fault make the fault stand out in vivid detail. Immediately south of Red Canyon, the 5-million-year-old Rock Canyon lava flow, which erupted on the eastern slope of the Markagunt Plateau, flowed eastward and crossed the fault (which at the time juxtaposed non-resistant fan alluvium against coarse-grained volcaniclastic deposits) (Biek and others, 2015). The flow is now offset 775 to 1130 feet (235-345 m) along the main strand of the fault, yielding an anomalously low vertical slip rate of about 0.05 mm/yr (Lund and others, 2008). However, this eastern branch of the Sevier fault accounts for only part of the total displacement on the fault zone. A concealed, down-to-the-west fault is present west of coarse-grained volcaniclastic strata at the base of the Claron cliffs. Seismic reflection data indicate that the total displacement on the fault zone in this area is about 3000 feet (900 m) (Lundin, 1987, 1989; Davis, 1999).

Application of section-balancing techniques to deep seismic reflection data from offshore eastern Canada: preliminary observations

1990 ◽  
Vol 27 (4) ◽  
pp. 494-500 ◽  
Author(s):  
M. C. Dentith ◽  
J. Hall
Keyword(s):  
Seismic Reflection ◽  
Hanging Wall ◽  
Shear Zones ◽  
Ductile Deformation ◽  
Eastern Canada ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Grand Banks ◽  
Jeanne D'arc Basin ◽  
Reflection Data

The application of section-balancing techniques to the analysis of deep seismic sections requires account be taken of isostasy and ductile-deformation processes. Structures imaged by deep seismic reflection profiling across the southern Grand Banks, offshore eastern Canada, are analyzed in this way. Correlations of dipping events in the deep crust, interpreted as shear zones, with faults recognized in the shallow part of the section are tested by attempting to restore the sections to their undeformed state by reversing the displacements on the faults. This process tests the geometric compatibility of the interpreted fault and the structures in its hanging wall. Our models suggest that the faults bounding the Whale and Horseshoe basins detach at the Mohorovičić discontinuity. In contrast, the fault bounding the Jeanne d'Arc Basin detaches within the lower crust.

Deformation styles at the Appalachian structural front, western Newfoundland: implications of new industry seismic reflection data

1998 ◽  
Vol 35 (11) ◽  
pp. 1288-1306 ◽  
Author(s):  
Glen S Stockmal ◽  
Art Slingsby ◽  
John WF Waldron
Keyword(s):  
Seismic Reflection ◽  
Hydrocarbon Exploration ◽  
Canadian Cordillera ◽  
Seismic Reflection Data ◽  
Middle Ordovician ◽  
Reflection Data ◽  
Triangle Zone ◽  
Structural Style ◽  
Southeastern Margin ◽  
New Industry

New seismic reflection data gathered during hydrocarbon exploration in and adjacent to the external Humber zone, western Newfoundland, have important implications for the interpretation of structural style at the Appalachian front. These new data indicate that the structural front is influenced by both thin-skinned and thick-skinned structures. Where the structural front is thin skinned, it is characterized by a triangle zone, or tectonic wedge, similar to structures observed at the southeastern margin of the Canadian Cordillera, and at other orogenic fronts. The thin-skinned tectonic wedge is overridden locally by thick-skinned thrusts, which are generally emergent but are locally blind, forming a thick-skinned tectonic wedge. Timing relationships indicate that, although initial motion occurred during the Early to Middle Ordovician Taconian orogeny, the thin-skinned allochthonous slices in western Newfoundland were not emplaced until Devonian time (the Acadian orogeny). Thick-skinned deformation, which postdates thin-skinned thrusting, probably occurred between Middle Devonian and earliest Carboniferous time.

Sign in / Sign up

Export Citation Format

Share Document