40 Ar/39Ar thermochronology and thermal evolution of Meso-Variscan granitoids of the Charroux-Civray plutonic complex (Seuil du Poitou)

2004 ◽  
Vol 175 (2) ◽  
pp. 147-156 ◽  
Author(s):  
Christian Le Carlier De Veslud ◽  
Paul Alexandre ◽  
Michel Cuney ◽  
Gilles Ruffet ◽  
Alain Cheilletz ◽  
...  

Abstract The eastern part of the “Seuil du Poitou” area had been selected by the French National radioactive waste management agency (ANDRA) as a potential site for building an underground laboratory in granitic rocks. 17 cored bore holes, completed by petrographical, geochemical [Cuney et al., 2001], geophysical [Virlogeux et al., 1999] and structural [Gros and Genter, 1999] studies, have provided a detailed knowledge of the Charroux-Civray complex, hidden under a Jurassic sedimentary cover. Three main types of magmas were distinguished : medium-K calk-alkaline, high-K calk-alkaline and peraluminous. The first two types are largely predominant and belong to the “Limousin Tonalitic line” (LTL) [Peiffer, 1985 ; 1986]. They were emplaced between 356 ± 5 Ma to 349 ± 5 Ma from U-Pb dating of zircon [Bertrand et al., 2001], at a depth of 14 ± 2 km [Freiberger et al., 2001]. This work aims to reconstruct the thermochronological evolution of the Charroux-Civray complex from 40Ar/39Ar dating of biotite and amphibole, combined with available U/Pb ages [Bertrand et al., 2001] and thermo-barometric data derived from mineral paragenesis and fluid inclusions [Freiberger et al., 2001]. This reconstruction may provide interesting constraints on a stage not well understood in the evolution of the French Massif Central : the emplacement of the LTL granitoids. The datings were performed on alteration-free, single grain of biotite and amphibole from the main petrologic types, according to the procedure described by Ruffet et al. [1991] and [1995]. The closure temperatures of the isotopic systems have been assumed to be 300 ± 30 oC for biotites, 500 ± 50 oC for amphiboles, and 850 ± 50 oC for zircons [Villa, 1998 ; McDougall and Harrison, 1999]. Six samples were dated : two tonalites (samples 112 and 212t), a monzogranite (sample 106), a monzogabbro-diorite (sample 115), a monzodiorite (sample 104), and a granodiorite (sample 105). Some of the analyses have been performed twice to test the reproducibility of the 40Ar/39Ar measurements. The 14 age spectra obtained may be divided into four groups : plateau ages, which provide robust ages for the amphiboles of samples 104, 106, 112, and biotites from samples 106, 115 and 212t ; pseudo-plateaux ages : three biotites (samples 104, 105 and 112) display spectrum shapes that could be interpreted as resulting from 39Ar recoil, related to an incipient chloritisation [Ruffet et al., 1991 ; McDougall and Harrison, 1999]. The most reliable ages are therefore close to the apparent ages given by the high temperature steps ; 40Ar* excess, as suggested by the spectrum shape of the amphibole from sample 212t [McDougall and Harrison, 1999]. The preferred age is defined with 83 % of released gas, and has been confirmed by a duplicate analysis ; a meaningless spectrum has been obtained on the amphiboles from sample 115. A duplicate analysis provided an approximate age of 347 ± 1 Ma, calculated on a relatively flat segment of the age spectrum. These results show that : (1) the closure of the isotopic system of the amphiboles occurred at approximately the same time over the entire complex (about 348 Ma) ; (2) the closure of the isotopic system of the biotites occurred slightly after the closure of the amphiboles, but spread over a larger time interval (350–343 Ma), (3) all the samples display high temperature gradients between 500 and 300 oC (> 40 oC.my-1). These results are in good agreement with mineralogical and fluid inclusion thermo-barometric data [Freiberger et al., 2001]. Two scénarios may be invoked to explain such high temperature gradients : a fast exhumation episode (several mm/y) during the 350–340 Ma period. This model is not acceptable because it is incompatible with pre- and post-intrusion conditions constrained by thermo-barometric data ; a fast thermal equilibration of the complex with surrounding rocks at the end of a succession of nearly-synchronous emplacement of calk-alkaline intrusions. First-order numerical models were used to simulate the thermal equilibration of the intrusive bodies with surrounding rocks, assuming a purely conductive heat regime [Carslaw and Jaeger, 1959]. These models show that according to the size of intrusions, the thermal equilibrium with surrounding rocks is reached in less than 5 to 10 m.y. The calculated temperature gradients derived from these models are compatible with those deduced from 40Ar/39Ar ages. These data confirm the existence of a major calk-alkaline magmatic event on the Seuil du Poitou, at about 355–350 Ma, which would be synchronous with the emplacement of the large peraluminous Guéret-type granodiorites in the northern Limousin. The 40Ar/39Ar biotite ages indicate that a regional temperature of 250–300 oC was reached at ca. 340 Ma at a depth of about 9 km.

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Hugo Duwiquet ◽  
Laurent Arbaret ◽  
Laurent Guillou-Frottier ◽  
Michael J. Heap ◽  
Mathieu Bellanger

Abstract The present study aims to understand the potential of a new and novel type of geothermal play system for high temperature and electricity production: crustal fault zones (CFZ). According to geological and geophysical data, the Pontgibaud fault zone (French Massif Central) is suspected to host an active hydrothermal system at a depth of a few kilometers. The deep geometry of the fault zone and the permeability distribution are the main unknown parameters that are required to assess the geothermal potential of the Pontgibaud site. Structural and thin-section observations, laboratory permeability and connected porosity measurements and X-ray micro-tomography observations suggest that the hydrothermal system behaves like a double matrix-fracture permeability reservoir. Numerical modeling in which we varied the fault dip and the ratio between the fault zone permeability and host rock, R, was performed. Results indicate that three main convective regimes can be identified (weak convection, single cellular-type convection and bicellular convection). For a sufficiently high fault zone permeability (> 1 × 10−15 m2), buoyancy-driven flow creates a positive thermal anomaly of several tens of °C at a depth of 2–5 km. For a vertical fault zone, the thermal anomaly is larger for higher R values. Numerical models, then applied to the geologically constrained Pontgibaud fault zone, show that a temperature of 150 °C at a depth of 2500 m can be obtained for a fault zone permeability of 1.6 × 10−14 m2. Based on a multi-disciplinary approach, this work establishes a potential predictive tool for future high-temperature geothermal operations within basement rocks hosting large-scale fault systems.


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-24
Author(s):  
Hugo Duwiquet ◽  
Laurent Guillou-Frottier ◽  
Laurent Arbaret ◽  
Mathieu Bellanger ◽  
Théophile Guillon ◽  
...  

The Pontgibaud crustal fault zone (CFZ) in the French Massif Central provides an opportunity to evaluate the high-temperature geothermal potential of these naturally permeable zones. Previous 2D modeling of heat and mass transfer in a fault zone highlighted that a subvertical CFZ concentrates the highest temperature anomalies at shallow depths. By comparing the results of these large-scale 2D numerical models with field data, the depth of the 150°C isotherm was estimated to be at a depth of 2.5 km. However, these results did not consider 3D effects and interactions between fluids, deformation, and temperature. Here, field measurements are used to control the 3D geometry of the geological structures. New 2D (thin-section) and 3D (X-ray microtomography) observations point to a well-defined spatial propagation of fractures and voids, exhibiting the same fracture architecture at different scales (2.5 μm to 2 mm). Moreover, new measurements on porosity and permeability confirm that the highly fractured and altered samples are characterized by large permeability values, one of them reaching 10-12 m2. Based on a thermoporoelastic hypothesis, a preliminary 3D THM numerical model is presented. A first parametric study highlights the role of permeability, stress direction, and intensity on fluid flow. In particular, three different convective patterns have been identified (finger-like, blob-like, and double-like convective patterns). The results suggest that vertical deformation zones oriented at 30 and 70° with respect to the maximum horizontal stress direction would correspond to the potential target for high-temperature anomalies. Finally, a large-scale 3D numerical model of the Pontgibaud CFZ, based on THM coupling and the comparison with field data (temperature, heat flux, and electrical resistivity), allows us to explore the spatial geometry of the 150°C isotherm. Although simplified hypotheses have been used, 3D field data have been reproduced.


2017 ◽  
Vol 735 ◽  
pp. 136-142 ◽  
Author(s):  
Nik Raikhan Nik Him ◽  
Nurul Shafika Azmi

Enzyme-added detergent must have the capability to operate at high temperature to support the enzyme proteins to clean soiled-fabrics at optimum conditions. Lipase from Bacillus stearothermophilus nr22 (Lip.nr-22) has improved the oil removal from soiled-cotton fabric by 38.8-51.4% in 4 types of local commercial detergents. The later was the oil removal from an unrevealed detergent. The optimum conditions were 108U/ml Lip.nr-22 in 0.1M, pH 7.0, washing temperature and washing time interval as 80°C and 40 min, respectively; shaking wash at 300 rpm and percentage of detergent concentration as 0.5. Lip.nr-22 is a very potential enzyme in high temperature-neutral pH operated laundry detergent formulations. It has exhibited a very excellent thermostability at 80°C, was very stable with surfactants, commercial detergents as well as with oxidizing agents (H2O2, NaBO3H2O and NaClO). Lip.nr-22 as additive in detergent formulation is a promise for better detergent formulation.


2015 ◽  
Vol 662 ◽  
pp. 115-118 ◽  
Author(s):  
Zdeněk Česánek ◽  
Jan Schubert ◽  
Šárka Houdková ◽  
Olga Bláhová ◽  
Michaela Prantnerová

Coating properties determine its behavior in operation. The simulation of future operational conditions is therefore the best quality test. The evaluation during operation is usually not possible to perform, and the coatings are therefore frequently characterized by their physical or mechanical properties. This text deals with the high temperature corrosion of HVOF sprayed Stellite 6 coating and with changes of its local mechanical properties before and after the corrosion testing. High temperature corrosion is defined as a corrosion in the presence of molten salts. In this case, the mixture of salts in composition of 59% Na2(SO)4 with 34.5% KCl and 6.5% NaCl was used. Two exposure temperatures 525 °C and 575 °C were selected and the tests for both temperatures were performed in the time interval of 168h in the autoclave. The coating with salt mixture layer was analyzed using scanning electron microscopy and nanoindentation. The high temperature resistance of Stellite 6 coating was evaluated according to the changes in the coating surface and by the occurrence of individual phases formed on the coating surface during the test. Generally, it can be said that the Stellite 6 alloys deposited by HVOF technology show selective oxidation under the salt film. This fact was also proved in this study. Furthermore, the nanoindentation measurements of Stellite 6 coating were performed before and after the corrosion testing. These measurements were used to evaluate the change of local mechanical coating properties.


Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1051
Author(s):  
Kun Liu ◽  
Xi Chen ◽  
Kangping Du ◽  
Yu Wang ◽  
Jinguang Du ◽  
...  

The purpose of this paper is to study the thermal shock resistance and failure mechanism of La2Ce2O7/8YSZ double-ceramic-layer thermal barrier coatings (LC/8YSZ DCL TBCs) under extreme temperature gradients. At high surface temperatures, thermal shock and infrared temperature measuring modules were used to determine the thermal cycling life and insulation temperature of LC/8YSZ DCL TBCs under extreme temperature gradients by an oxygen–acetylene gas flame testing machine. A viscoelastic model was used to obtain the stress and strain law of solid phase sintering of a coating system using the finite element method. Results and Conclusion: (1) Thermal cycling life was affected by the surface temperature of LC/8YSZ DCL TBCs and decreased sharply with the increase of surface temperature. (2) The LC ceramic surface of the failure coating was sintered, and the higher the temperature, the faster the sintering process. (3) Accelerated life test results showed that high temperature thermal cycling life is not only related to thermal fatigue of ceramic layer, but is also related to the sintering degree of the coating. (4) Although the high temperature thermal stress had great influence on the coating, great sintering stress was produced with sintering of the LC ceramic layer, which is the main cause of LC/8YSZ DCL TBC failure. The above results indicate that for new TBC ceramic materials, especially those for engines above class F, their sinterability should be fully considered. Sintering affects the thermal shock properties at high temperature. Our research results can provide reference for material selection and high temperature performance research.


Author(s):  
Lars C. Gansel ◽  
Per Christian Endresen ◽  
Kristine Braaten Steinhovden ◽  
Stine Wiborg Dahle ◽  
Eirik Svendsen ◽  
...  

Biofouling is a serious problem in marine finfish aquaculture with a number of negative impacts. Marine growth obstructs net openings, thereby reducing water exchange through the net and affecting fish welfare and health, as well as the spreading of dissolved nutrients, particles and pathogens. Furthermore, additional water blockage leads to increased hydrodynamic forces on fish cages, which potentially threaten the structural integrity of the fish farm. However, detailed knowledge about the effects of biofouling on the flow past, and the resulting forces on fish cages, is limited and systematic investigations of the effects of different types of fouling have been called for. This study investigates the effects of different amounts and sizes of two important fouling organisms in Norwegian aquaculture, blue mussel (Mytilus edulis) and kelp (Saccharina latissima) on the drag on net panels. Drag forces on a number of clean and fouled nets were measured in a flume tank at a flow speed of 0.1 m/s. Net solidity was calculated from images acquired of all nets in the current. The relationship between net solidity and drag was then found for clean nets and for each type of fouling, and biofouling was parameterized by comparing clean and fouled net results: for a given fouled net, a clean net can be found that experiences the same drag. The latter can then be used in numerical models to estimate the effect of fouling on net drag. That means existing models can be used to model the drag effect of fouling. This study found a solidity increase due to mussel and kelp fouling to affect drag roughly at the same rate as an increase in clean net solidity at a flow speed of 0.1 ms−1 and within the tested fouling size range for two net types. Therefore, existing models, describing the relationship between net solidity and drag, can be used directly or with minor alterations (especially at high solidities) to estimate effects of additional mussel and kelp fouling on drag. In contrast, wet weight seems to be unsuitable as a measure to estimate drag on nets fouled with seaweed or mussels. It should be noted that these findings are only valid under similar conditions, and that other fouling types and sizes, as well as test parameters and tank size can affect the relationship between solidity and drag.


Author(s):  
Laura Mitrea ◽  
Bernadette-Emoke Teleky ◽  
Loredana-Florina Leopold ◽  
Silvia-Amalia Nemes ◽  
Diana Plamada ◽  
...  

2021 ◽  
Author(s):  
Christian Zeeden ◽  
Mathias Vinnepand ◽  
Kamila Ryzner ◽  
Christian Rolf ◽  
Christian Laag ◽  
...  

<p>Spatial patterns of precipitation and aridity across Europe are most likely to vary in response to changing temperature. Our knowledge about such responses is, however, still limited as most geoscientific studies provide point data rather than cover wider areas. Such an approach would require reliable proxies, which can be determined in high spatial resolution along with detailed knowledge about how these reflect climate. Classically, we derive (paleo-) precipitation and -temperature for terrestrial areas from climofunctions, which base on magnetic susceptibility (χ) and its frequency dependence (χ<sub>fd</sub>). These parameters reflect the quantity and modification state of magnetic minerals like magnetite, which are dependent on the combined influence of temperature and precipitation. Recently, also the maghemite contribution to the high-temperature dependent susceptibility (χ<sub>td</sub>) has been used to create climofunctions, which are mainly constrained to reconstruction of (palaeo-) precipitation. Yet, such relationships have mostly been reported from Asia.</p><p>In this study, we test if we can qualify and quantify (palaeo-) precipitation, temperature and aridity by room- and high-temperature rock magnetic and colorimetric data of recent topsoils in a narrow precipitation range between ~535 mm/a and 585 mm/a. The data are derived from geographically evenly distributed bulk-samples from the Backa Loess Plateau (Middle Danube Basin). Our results show that we can quantify precipitation by rock magnetic properties (χ, χ<sub>fd</sub>, as well as χ<sub>td</sub>), but colorimetric methods are more challenging to interpret. While we can also reconstruct aridity, temperature is difficult to determine in a meaningful way.</p><p>In this contribution, we show the results of statistical analysis performed on a multivariate rock magnetic and colorimetric dataset, and their relation to geographical differences in prevailing climatic regimes of the Middle Danube Basin. While care needs to be taken not to overfit the data (due to more colorimetric variables than spatial data points), we regard our multivariate approach at least as relevant as trying to fit individual magnetic or colorimetric proxies to climate variables.</p>


Sign in / Sign up

Export Citation Format

Share Document