Onboard Fast Retrieving of Significant Wave Height from Leading Edge of Altimeter Waveforms

2020 ◽  
Vol 99 (sp1) ◽  
pp. 236
Author(s):  
Yalong Liu ◽  
Ling Ji ◽  
Shuguang Zou ◽  
Yuanyuan Wu ◽  
Youguang Zhang
Keyword(s):  
Wave Height ◽  
Significant Wave Height ◽  
Leading Edge ◽  
Significant Wave

scholarly journals Capability of Jason-2 Subwaveform Retrackers for Significant Wave Height in the Calm Semi-Enclosed Celebes Sea

2020 ◽  
Vol 12 (20) ◽  
pp. 3367
Author(s):  
Kaoru Ichikawa ◽  
Xi-Feng Wang ◽  
Hitoshi Tamura
Keyword(s):  
Wave Height ◽  
Significant Wave Height ◽  
Leading Edge ◽  
Sea State ◽  
Significant Wave ◽  
Contamination Sources ◽  
The Pacific ◽  
Unique System ◽  
Calm Water ◽  
Good Agreement

Satellite altimetry is a unique system that provides repeated observations of significant wave height (SWH) globally, but its measurements could be contaminated by lands, slicks, or calm water with smooth surface. In this study, capability of subwaveform retrackers against 20 Hz Jason-2 measurements is examined in the calm Celebes Sea. Distances between contamination sources and Jason-2 observation points can be determined using sequentially assembled adjacent waveforms (radargram). When no contamination sources are present within a Jason-2 footprint, subwaveform retrackers are in excellent agreement with the Sensor Geophysical Data Records (SGDR) MLE4 retracker that uses full-length waveforms, except that Adaptive Leading Edge Subwaveform (ALES) retracker has a positive bias in a calm sea state (SWH < 1 m), which is not unusual in the Celebes Sea. Meanwhile, when contamination sources exist within 4.5 km from Jason-2 observation points, SGDR occasionally estimates unrealistically large SWH values, although they could be partly eliminated by sigma0 filters. These datasets are then compared with WAVEWATCH III model, resulting in good agreement. The agreement becomes worse if swells from the Pacific is excluded in the model, suggesting constant presence of swells despite the semi-enclosed nature. In addition, outliers are found related with locally-confined SWH events, which could be inadequately represented in the model.

On the Sensitivity of Passive Multistatic Radar Amplitude and Doppler Measurements to Significant Wave Height

2021 ◽  
pp. 1-5
Author(s):  
Jeffrey D. Ouellette ◽  
William T. Bounds ◽  
David J. Dowgiallo ◽  
Jakov V. Toporkov ◽  
Paul A. Hwang
Keyword(s):  
Wave Height ◽  
Significant Wave Height ◽  
Significant Wave ◽  
Multistatic Radar

scholarly journals Estimation of Significant Wave Heights from ASCAT Scatterometer Data via Deep Learning Network

2021 ◽  
Vol 13 (2) ◽  
pp. 195
Author(s):  
He Wang ◽  
Jingsong Yang ◽  
Jianhua Zhu ◽  
Lin Ren ◽  
Yahao Liu ◽  
...  
Keyword(s):  
Deep Learning ◽  
Wave Height ◽  
Significant Wave Height ◽  
Incidence Angle ◽  
Ocean Waves ◽  
Global Scale ◽  
Learning Technology ◽  
Sea State ◽  
Significant Wave ◽  
Wave Heights

Sea state estimation from wide-swath and frequent-revisit scatterometers, which are providing ocean winds in the routine, is an attractive challenge. In this study, state-of-the-art deep learning technology is successfully adopted to develop an algorithm for deriving significant wave height from Advanced Scatterometer (ASCAT) aboard MetOp-A. By collocating three years (2016–2018) of ASCAT measurements and WaveWatch III sea state hindcasts at a global scale, huge amount data points (>8 million) were employed to train the multi-hidden-layer deep learning model, which has been established to map the inputs of thirteen sea state related ASCAT observables into the wave heights. The ASCAT significant wave height estimates were validated against hindcast dataset independent on training, showing good consistency in terms of root mean square error of 0.5 m under moderate sea condition (1.0–5.0 m). Additionally, reasonable agreement is also found between ASCAT derived wave heights and buoy observations from National Data Buoy Center for the proposed algorithm. Results are further discussed with respect to sea state maturity, radar incidence angle along with the limitations of the model. Our work demonstrates the capability of scatterometers for monitoring sea state, thus would advance the use of scatterometers, which were originally designed for winds, in studies of ocean waves.

scholarly journals Physical Modelling of the Effect on the Wave Field of the WaveCat Wave Energy Converter

2021 ◽  
Vol 9 (3) ◽  
pp. 309
Author(s):  
James Allen ◽  
Gregorio Iglesias ◽  
Deborah Greaves ◽  
Jon Miles
Keyword(s):  
Wave Height ◽  
Wave Energy ◽  
Significant Wave Height ◽  
Wedge Angle ◽  
Wave Energy Converter ◽  
Wave Period ◽  
Surface Elevation ◽  
Energy Converter ◽  
Significant Wave ◽  
Model Scale

The WaveCat is a moored Wave Energy Converter design which uses wave overtopping discharge into a variable v-shaped hull, to generate electricity through low head turbines. Physical model tests of WaveCat WEC were carried out to determine the device reflection, transmission, absorption and capture coefficients based on selected wave conditions. The model scale was 1:30, with hulls of 3 m in length, 0.4 m in height and a freeboard of 0.2 m. Wave gauges monitored the surface elevation at discrete points around the experimental area, and level sensors and flowmeters recorded the amount of water captured and released by the model. Random waves of significant wave height between 0.03 m and 0.12 m and peak wave periods of 0.91 s to 2.37 s at model scale were tested. The wedge angle of the device was set to 60°. A reflection analysis was carried out using a revised three probe method and spectral analysis of the surface elevation to determine the incident, reflected and transmitted energy. The results show that the reflection coefficient is highest (0.79) at low significant wave height and low peak wave period, the transmission coefficient is highest (0.98) at low significant wave height and high peak wave period, and absorption coefficient is highest (0.78) when significant wave height is high and peak wave period is low. The model also shows the highest Capture Width Ratio (0.015) at wavelengths on the order of model length. The results have particular implications for wave energy conversion prediction potential using this design of device.

Sea State Estimation Based on Ship Motions Measurements and Data Fusion

2013 ◽  
Author(s):  
Céline Drouet ◽  
Nicolas Cellier ◽  
Jérémie Raymond ◽  
Denis Martigny
Keyword(s):  
Data Fusion ◽  
State Estimation ◽  
Wave Height ◽  
Significant Wave Height ◽  
Wave Spectrum ◽  
Ocean Waves ◽  
Ship Motions ◽  
Sea State ◽  
Significant Wave ◽  
X Band

In-service monitoring can help to increase safety of ships especially regarding the fatigue assessment. For this purpose, it is compulsory to know the environmental conditions encountered: wind, but also the full directional wave spectrum. During the EU TULCS project, a full scale measurements campaign has been conducted onboard the CMA-CGM 13200 TEU container ship Rigoletto. She has been instrumented to measure deformation of the ship as well as the sea state encountered during its trip. This paper will focus on the sea state estimation. Three systems have been installed to estimate the sea state encountered by the Rigoletto: An X-band radar from Ocean Waves with WAMOS® system and two altimetric wave radars from RADAC®. Nevertheless, the measured significant wave height can be disturbed by several external elements like bow waves, sprays, sea surface ripples, etc… Furthermore, ship motions are also measured and can provide another estimation of the significant wave height using a specific algorithm developed by DCNS Research for the TULCS project. As all those estimations are inherently different, it is necessary to make a fusion of those data to provide a single estimation (“best estimate”) of the significant wave height. This paper will present the data fusion process developed for TULCS and show some first validation results.

Semi-Empirical Crest Distributions of Long-Crest Nonlinear Waves of Three-Hour Duration

2017 ◽  
Author(s):  
Zhenjia (Jerry) Huang ◽  
Qiuchen Guo
Keyword(s):  
Nonlinear Wave ◽  
Wave Height ◽  
Model Test ◽  
Significant Wave Height ◽  
Spectral Peak ◽  
Wave Crest ◽  
Empirical Formulas ◽  
Peak Period ◽  
Significant Wave ◽  
Semi Empirical

In wave basin model test of an offshore structure, waves that represent the given sea states have to be generated, qualified and accepted for the model test. For seakeeping and stationkeeping model tests, we normally accept waves in wave calibration tests if the significant wave height, spectral peak period and spectrum match the specified target values. However, for model tests where the responses depend highly on the local wave motions (wave elevation and kinematics) such as wave impact, green water impact on deck and air gap tests, additional qualification checks may be required. For instance, we may need to check wave crest probability distributions to avoid unrealistic wave crest in the test. To date, acceptance criteria of wave crest distribution calibration tests of large and steep waves of three-hour duration (full scale) have not been established. The purpose of the work presented in the paper is to provide a semi-empirical nonlinear wave crest distribution of three-hour duration for practical use, i.e. as an acceptance criterion for wave calibration tests. The semi-empirical formulas proposed in this paper were developed through regression analysis of a large number of fully nonlinear wave crest distributions. Wave time series from potential flow simulations, computational fluid dynamics (CFD) simulations and model test results were used to establish the probability distribution. The wave simulations were performed for three-hour duration assuming that they were long-crested. The sea states are assumed to be represented by JONSWAP spectrum, where a wide range of significant wave height, peak period, spectral peak parameter, and water depth were considered. Coefficients of the proposed semi-empirical formulas, comparisons among crest distributions from wave calibration tests, numerical simulations and the semi-empirical formulas are presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document