SHALLOW SUBSURFACE DOLOMITIZATION OF SUBTIDALLY DEPOSITED CARBONATE SEDIMENTS IN THE HANSON CREEK FORMATION (ORDOVICIAN—SILURIAN) OF CENTRAL NEVADA

1980 ◽  
pp. 139-161 ◽  
Author(s):  
JOHN B. DUNHAM ◽  
ERIC R. OLSON
2016 ◽  
Vol 53 (2) ◽  
pp. 93-114
Author(s):  
Jesús Pinto ◽  
John Warme

We interpret a discrete, anomalous ~10-m-thick interval of the shallow-marine Middle to Late Devonian Valentine Member of the Sultan Formation at Frenchman Mountain, southern Nevada, to be a seismite, and that it was generated by the Alamo Impact Event. A suite of deformation structures characterize this unique interval of peritidal carbonate facies at the top of the Valentine Member; no other similar intervals have been discovered in the carbonate beds on Frenchman Mountain or in equivalent Devonian beds exposed in ranges of southern Nevada. The disrupted band extends for 5 km along the Mountain, and onto the adjoining Sunrise Mountain fault block for an additional 4+km. The interval displays a range of brittle, ductile and fluidized structures, and is divided into four informal bed-parallel units based on discrete deformation style and internal features that carry laterally across the study area. Their development is interpreted as the result of intrastratal compressional and contractional forces imposed upon the unconsolidated to fully cemented near-surface carbonate sediments at the top of the Valentine Member. The result is an assemblage of fractured, faulted, and brecciated beds, some of which were dilated, fluidized and injected to form new and complex matrix bands between beds. We interpret that the interval is an unusually thick and well displayed seismite. Because the Sultan Formation correlates northward to the Frasnian (lower Upper Devonian) carbonate rocks of the Guilmette Formation, and the Guilmette contains much thicker and more proximal exposures of the Alamo Impact Breccia, including seismites, we interpret the Frenchman Mountain seismite to be a far-field product of the Alamo Impact Event. Accompanying ground motion and deformation of the inner reaches of the Devonian carbonate platform may have resulted in a fall of relative sea level and abrupt shift to a salt-pan paleoenvironment exhibited by the post-event basal beds of the directly overlying Crystal Pass Member.


2021 ◽  
Author(s):  
Adam Cygal ◽  
Michał Stefaniuk ◽  
Anna Kret

AbstractThis article presents the results of an integrated interpretation of measurements made using Audio-Magnetotellurics and Seismic Reflection geophysical methods. The obtained results were used to build an integrated geophysical model of shallow subsurface cover consisting of Cenozoic deposits, which then formed the basis for a detailed lithological and tectonic interpretation of deeper Mesozoic sediments. Such shallow covers, consisting mainly of glacial Pleistocene deposits, are typical for central and northern Poland. This investigation concentrated on delineating the accurate geometry of Obrzycko Cenozoic graben structure filled with loose deposits, as it was of great importance to the acquisition, processing and interpretation of seismic data that was to reveal the tectonic structure of the Cretaceous and Jurassic sediments which underly the study area. Previously, some problems with estimation of seismic static corrections over similar grabens filled with more recent, low-velocity deposits were encountered. Therefore, a novel approach to estimating the exact thickness of such shallow cover consisting of low-velocity deposits was applied in the presented investigation. The study shows that some alternative geophysical data sets (such as magnetotellurics) can be used to significantly improve the imaging of geological structure in areas where seismic data are very distorted or too noisy to be used alone


2021 ◽  
Vol 13 (7) ◽  
pp. 1387
Author(s):  
Chao Li ◽  
Jinhai Zhang

The high-frequency channel of lunar penetrating radar (LPR) onboard Yutu-2 rover successfully collected high quality data on the far side of the Moon, which provide a chance for us to detect the shallow subsurface structures and thickness of lunar regolith. However, traditional methods cannot obtain reliable dielectric permittivity model, especially in the presence of high mix between diffractions and reflections, which is essential for understanding and interpreting the composition of lunar subsurface materials. In this paper, we introduce an effective method to construct a reliable velocity model by separating diffractions from reflections and perform focusing analysis using separated diffractions. We first used the plane-wave destruction method to extract weak-energy diffractions interfered by strong reflections, and the LPR data are separated into two parts: diffractions and reflections. Then, we construct a macro-velocity model of lunar subsurface by focusing analysis on separated diffractions. Both the synthetic ground penetrating radar (GPR) and LPR data shows that the migration results of separated reflections have much clearer subsurface structures, compared with the migration results of un-separated data. Our results produce accurate velocity estimation, which is vital for high-precision migration; additionally, the accurate velocity estimation directly provides solid constraints on the dielectric permittivity at different depth.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Cheng-Cheng Zhang ◽  
Bin Shi ◽  
Song Zhang ◽  
Kai Gu ◽  
Su-Ping Liu ◽  
...  

AbstractVertical deformation profiles of subterranean geological formations are conventionally measured by borehole extensometry. Distributed strain sensing (DSS) paired with fiber-optic cables installed in the ground opens up possibilities for acquiring high-resolution static and quasistatic strain profiles of deforming strata, but it is currently limited by reduced data quality due to complicated patterns of interaction between the buried cables and their surroundings, especially in upper soil layers under low confining pressures. Extending recent DSS studies, we present an improved approach using microanchored fiber-optic cables—designed to optimize ground-to-cable coupling at the near surface—for strain determination along entire lengths of vertical boreholes. We proposed a novel criterion for soil–cable coupling evaluation based on the geotechnical bearing capacity theory. We applied this enhanced methodology to monitor groundwater-related vertical motions in both laboratory and field experiments. Corroborating extensometer recordings, acquired simultaneously, validated fiber optically determined displacements, suggesting microanchored DSS as an improved means for detecting and monitoring shallow subsurface strain profiles.


2021 ◽  
Vol 6 (1) ◽  
pp. 14
Author(s):  
Liudmila Demina ◽  
Irina Gablina ◽  
Olga Dara ◽  
Dmitry Budko ◽  
Nina Gorkova ◽  
...  

We examined the distribution of Fe, Mn, Cu, Zn, and Pb in one core of metalliferous, and one core of non-mineralized (background) carbonate sediments (located 69 km northwards), from the Pobeda hydrothermal field. Mechanisms of metal accumulation in sediments (12 samples) were evaluated based on sequential extraction of geochemical fractions, including mobile (exchangeable complex, authigenic Fe-Mn hydroxides, and sulfides), and lithogenic (fixed in crystalline lattices) forms. Maps of element distribution in sediment components were obtained using a scanning electron microscope equipped with an energy-dispersive spectrometry detector. In metalliferous sediments, according to X-ray diffraction data, the main Fe mineral phase was goethite FeOOH (37–44% on a carbonate-free basis). The contents of Fe and Mn reached 31.6 and 0.18%, respectively, whereas concentrations of Cu, Zn and Pb were 0.98, 0.36, and 0.059%. The coefficient of metal enrichment relative to background values varied from 16 to 125 times. The exception was Mn, for which no increased accumulation was recorded. Essential mass of Fe (up to 70% of total content) was represented by the residual fraction composed of crystallized goethite, aluminosilicates, the minerals derived from bedrock destruction processes. Among geochemically mobile fractions, 90–97% of total Fe was found in the form of authigenic oxyhydroxides. The same fraction was the predominant host for Mn in both metalliferous and background sediments (55–85%). A total of 40–96 % of Cd, Cu, Zn, and Pb were associated with these Fe and Mn fractions. The sulfide fraction amounted to roughly 10% of each metal. In metalliferous sediment core, the maximum concentrations of metals and their geochemically mobile fractions were recorded in deeper core intercepts, an observation that might be attributed to influence of hydrothermal diffused fluids. Our data suggested that metals are mostly accumulated in carbonate sediments in their contact zone with the underlying serpentinized basalts.


2014 ◽  
Vol 1065-1069 ◽  
pp. 3291-3294
Author(s):  
Xin Wei Zhao ◽  
Hui Zhi Hao

Halimeda is an important reef-building green alga. Scanning electron microscopy (SEM) and energy spectrum tests on green and white Halimeda collected from Shidao Island in the Xisha Islands show that carbonate is predominantly deposited in the cortexes and medullas, especially in the aragonite raphides of them, as the case of calcium carbonate. These modern carbonate sediments are then compared with their ancient counterparts that are collected from Xichen-1 well in the Yongle Atoll, where a large number of Halimeda segments have been recognized in about 100-m-long late Miocene-middle Miocene whole-coring succession. In addition, there are developed great numbers of algal-frame holes, including secondary dissolved pores and intercrystalline pores in the medullas and in aragonites between cysts, which have formed particular network systems and pore throats.


2021 ◽  
Vol 750 (1) ◽  
pp. 012012
Author(s):  
B Sugiarto ◽  
F B Prasetyo ◽  
M Zulfikar ◽  
G Latuputty ◽  
R Zuraida ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document