scholarly journals Elevated osteogenic potential of stem cells from inflammatory dental pulp tissues by Wnt4 overexpression for treating bone defect in rats

2020 ◽  
Vol 9 (5) ◽  
pp. 2962-2969
Author(s):  
Tianyu Zhong ◽  
Yunan Gao ◽  
Hu Qiao ◽  
Hong Zhou ◽  
Yong Liu
Keyword(s):  
Stem Cells ◽  
Bone Defect ◽  
Dental Pulp ◽  
Osteogenic Potential

scholarly journals Fibrin Glue Implants Seeded with Dental Pulp and Periodontal Ligament Stem Cells for the Repair of Periodontal Bone Defects: A Preclinical Study

2021 ◽  
Vol 8 (6) ◽  
pp. 75
Author(s):  
Natella I. Enukashvily ◽  
Julia A. Dombrovskaya ◽  
Anastasia V. Kotova ◽  
Natalia Semenova ◽  
Irina Karabak ◽  
...  
Keyword(s):  
Stem Cells ◽  
3D Printing ◽  
Fibrin Glue ◽  
Bone Defect ◽  
Dental Pulp ◽  
Alveolar Bone ◽  
Bone Defects ◽  
Osteogenic Potential ◽  
Fibrin Gel ◽  
A Cell

A technology to create a cell-seeded fibrin-based implant matching the size and shape of bone defect is required to create an anatomical implant. The aim of the study was to develop a technology of cell-seeded fibrin gel implant creation that has the same shape and size as the bone defect at the site of implantation. Using computed tomography (CT) images, molds representing bone defects were created by 3D printing. The form was filled with fibrin glue and human dental pulp stem cells (DPSC). The viability, set of surface markers and osteogenic differentiation of DPSC grown in fibrin gel along with the clot retraction time were evaluated. In mice, an alveolar bone defect was created. The defect was filled with fibrin gel seeded with mouse DPSC. After 28 days, the bone repair was analyzed with cone beam CT and by histological examination. The proliferation rate, set of surface antigens and osteogenic potential of cells grown inside the scaffold and in 2D conditions did not differ. In mice, both cell-free and mouse DPSC-seeded implants increased the bone tissue volume and vascularization. In mice with cell-seeded gel implants, the bone remodeling process was more prominent than in animals with a cell-free implant. The technology of 3D-printed forms for molding implants can be used to prepare implants using components that are not suitable for 3D printing.

Association of Dental Pulp Stem Cells and Ricinus Bone Compound in a Model of Bone Defect

2020 ◽  
Vol 3 (3) ◽  
pp. 267-278
Author(s):  
Alan Jesus ◽  
Adriano Jesus ◽  
Flávia Lima ◽  
Luiz Freitas ◽  
Cássio Meira ◽  
...  
Keyword(s):  
Stem Cells ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Bone Defect ◽  
Dental Pulp ◽  
Dental Pulp Stem Cells ◽  
Osteogenic Potential ◽  
Autogenous Bone ◽  
Control Group

Autogenous bone grafting is needed in some bone tissue defects; however, it causes secondary surgical wounds and morbidity. Tissue bioengineering may be an alternative approach for bone regeneration. Here we investigated the osteogenic potential of dental pulp stem cells from deciduous teeth (DPSC) in association with a Ricinus bone compound (RBC) in a model of bone defect. The influence of the biomaterial RBC on the proliferation and osteogenic differentiation of DPSC was assessed in vitro by MTT metabolism and alizarin red staining, respectively. The morphologic analysis was performed using the optic and scanning electron (SEM) microscopies. For the in vivo study, 54 Wistar rats submitted to calvarial defects were filled with RBC or RBC+DPSC. A control group had the defects filled only with blood clots. Analyses were performed 15, 30 and 60 days after treatment using digital radiography, optical microscopy, SEM and chemical analysis by electron dispersive spectroscopy. The Ricinus bone compound (RBC) did not inhibit the osteogenic differentiation in vitro. No spontaneous regeneration was observed in the control group. The area of the calvarial defect of the RBC+DPSC group showed greater radiopacity on day 15. The RBC presented no reabsorption, was biocompatible and showed osteointegration, working as a mechanical filling. Only sparse ossification areas were found and those were larger and more developed on the RBC+DPSC group when compared to animals treated only with RBC. RBC in association with DPSC is a promising combination for applications in bone regeneration.  

scholarly journals Association of Dental Pulp Stem Cells and Ricinus Bone Compound in a Model of Bone Defect

2020 ◽  
Vol 3 (3) ◽  
pp. 267-278
Author(s):  
Alan Araújo de Jesus ◽  
Adriano Araújo de Jesus ◽  
Flávia Oliveira de Lima ◽  
Luiz Antônio Rodrigues de Freitas ◽  
Cássio Santana Meira ◽  
...  
Keyword(s):  
Stem Cells ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Bone Defect ◽  
Dental Pulp ◽  
Dental Pulp Stem Cells ◽  
Osteogenic Potential ◽  
Autogenous Bone ◽  
Control Group

Autogenous bone grafting is needed in some bone tissue defects; however, it causes secondary surgical wounds and morbidity. Tissue bioengineering may be an alternative approach for bone regeneration. Here we investigated the osteogenic potential of dental pulp stem cells from deciduous teeth (DPSC) in association with a Ricinus bone compound (RBC) in a model of bone defect. The influence of the biomaterial RBC on the proliferation and osteogenic differentiation of DPSC was assessed in vitro by MTT metabolism and alizarin red staining, respectively. The morphologic analysis was performed using the optic and scanning electron (SEM) microscopies. For the in vivo study, 54 Wistar rats submitted to calvarial defects were filled with RBC or RBC+DPSC. A control group had the defects filled only with blood clots. Analyses were performed 15, 30 and 60 days after treatment using digital radiography, optical microscopy, SEM and chemical analysis by electron dispersive spectroscopy. The Ricinus bone compound (RBC) did not inhibit the osteogenic differentiation in vitro. No spontaneous regeneration was observed in the control group. The area of the calvarial defect of the RBC+DPSC group showed greater radiopacity on day 15. The RBC presented no reabsorption, was biocompatible and showed osteointegration, working as a mechanical filling. Only sparse ossification areas were found and those were larger and more developed on the RBC+DPSC group when compared to animals treated only with RBC. RBC in association with DPSC is a promising combination for applications in bone regeneration.  

scholarly journals Comparative evaluation of osteogenic differentiation potential of stem cells derived from dental pulp and exfoliated deciduous teeth cultured over granular hydroxyapatite based scaffold

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Manal Nabil Hagar ◽  
Farinawati Yazid ◽  
Nur Atmaliya Luchman ◽  
Shahrul Hisham Zainal Ariffin ◽  
Rohaya Megat Abdul Wahab
Keyword(s):  
Stem Cells ◽  
Osteogenic Differentiation ◽  
Dental Pulp ◽  
3D Culture ◽  
Permanent Teeth ◽  
Deciduous Teeth ◽  
Osteogenic Potential ◽  
Control Group ◽  
Rt Pcr ◽  
Differentiation Potential

Abstract Background Mesenchymal stem cells isolated from the dental pulp of primary and permanent teeth can be differentiated into different cell types including osteoblasts. This study was conducted to compare the morphology and osteogenic potential of stem cells from exfoliated deciduous teeth (SHED) and dental pulp stem cells (DPSC) in granular hydroxyapatite scaffold (gHA). Preosteoblast cells (MC3T3-E1) were used as a control group. Methodology The expression of stemness markers for DPSC and SHED was evaluated using reverse transcriptase-polymerase chain reaction (RT-PCR). Alkaline phosphatase assay was used to compare the osteoblastic differentiation of these cells (2D culture). Then, cells were seeded on the scaffold and incubated for 21 days. Morphology assessment using field emission scanning electron microscopy (FESEM) was done while osteogenic differentiation was detected using ALP assay (3D culture). Results The morphology of cells was mononucleated, fibroblast-like shaped cells with extended cytoplasmic projection. In RT-PCR study, DPSC and SHED expressed GAPDH, CD73, CD105, and CD146 while negatively expressed CD11b, CD34 and CD45. FESEM results showed that by day 21, dental stem cells have a round like morphology which is the morphology of osteoblast as compared to day 7. The osteogenic potential using ALP assay was significantly increased (p < 0.01) in SHED as compared to DPSC and MC3T3-E1 in 2D and 3D cultures. Conclusion gHA scaffold is an optimal scaffold as it induced osteogenesis in vitro. Besides, SHED had the highest osteogenic potential making them a preferred candidate for tissue engineering in comparison with DPSC.

Comparing the osteogenic potential of schneiderian membrane and dental pulp mesenchymal stem cells: an in vitro study

2021 ◽  
Author(s):  
Antoine Berbéri ◽  
Joseph Sabbagh ◽  
Rita Bou Assaf ◽  
Michella Ghassibe-Sabbagh ◽  
Fatima Al-Nemer ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Dental Pulp ◽  
In Vitro Study ◽  
Vitro Study ◽  
Osteogenic Potential ◽  
Schneiderian Membrane

scholarly journals A Comparative In Vitro Analysis of the Osteogenic Potential of Human Dental Pulp Stem Cells Using Various Differentiation Conditions

2020 ◽  
Vol 21 (7) ◽  
pp. 2280 ◽  
Author(s):  
Terezia Okajcekova ◽  
Jan Strnadel ◽  
Michal Pokusa ◽  
Romana Zahumenska ◽  
Maria Janickova ◽  
...  
Keyword(s):  
Stem Cells ◽  
Osteogenic Differentiation ◽  
Dental Pulp ◽  
Dental Pulp Stem Cells ◽  
Osteogenic Potential ◽  
Surface Markers ◽  
Osteogenic Medium ◽  
Differentiated Cells ◽  
Mineralization Potential ◽  
Gene And Protein Expression

Dental pulp stem cells (DPSCs) have excellent proliferative properties, mineralization potential and can be easily obtained from third molar teeth. Recently, many studies have focused on isolation and differentiation of DPSCs. In our study, we focused on biological properties of non-differentiated DPSCs in comparison with osteogenic differentiated cells from DPSCs. We analyzed morphology as well as mineralization potential using three varied osteogenic differentiation media. After fifteen days of differentiation, calcium deposit production was observed in all three osteogenic differentiation media. However, only one osteogenic medium, without animal serum supplement, showed rapid and strong calcification—OsteoMAX-XF™ Differentiation Medium. Therefore, we examined specific surface markers, and gene and protein expression of cells differentiated in this osteogenic medium, and compared them to non-differentiated DPSCs. We proved a decrease in expression of CD9 and CD90 mesenchymal stem cell surface markers, as well as downregulation in the expression of pluripotency genes (NANOG and OCT-4) and increased levels of expression in osteogenic genes (ALP, BSP, OCN and RUNX2). Moreover, osteogenic proteins, such as BSP and OCN, were only produced in differentiated cells. Our findings confirm that carefully selected differentiation conditions for stem cells are essential for their translation into future clinical applications.

Transplantation of Dental Pulp Stem Cells in Experimental Bone Defect

2017 ◽  
Vol 34 ◽  
pp. 94-100 ◽  
Author(s):  
Endang W. Bachtiar ◽  
Fatma S. Dewi ◽  
Ahmad Aulia Yusuf ◽  
Rahmi Ulfiana
Keyword(s):  
Stem Cells ◽  
Animal Model ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Defect ◽  
Dental Pulp ◽  
Dental Pulp Stem Cells ◽  
Bone Tissue Regeneration ◽  
Histological Evaluation ◽  
Control Rabbit

This is preliminary study in order to investigate the effect of dental pulp stem cells (DPSCs) on bone regeneration in an animal model. New Zealand rabbits were used as animal model. The critical defect was created in femoral bone and transplantation of DPSCs applied into bone defect. A colorimetric assay was used to detect ALP level in rabbit’s serum. Bone tissue regeneration was evaluated by histological analysis. In the 2nd week, the treated rabbit show increasing in the activity of ALP (157,925 μU) compared to control rabbit (155,361 μU). This increasing trend continues significantly in DPSCs rabbit (169.750 μU) compared to control rabbit (160.406) after 4 weeks. Histological evaluation revealed that the amount of bone lamellae and osteocytes were filled the defect area of DPSCs treated rabbit. Conclusions: Transplantation of DPSCs accelerating bone regeneration by raising ALP level and forming new bone tissue.

scholarly journals Influence of Mesenchymal Stem Cells Niche in Their Ostegenic Fate on Different Surfaces

2020 ◽  
Author(s):  
Arkaitz Mucientes ◽  
Eva Herranz ◽  
Enrique Moro ◽  
Aranzazu González-Corchón ◽  
María Jesús Peña-Soria ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Bone Regeneration ◽  
Dental Pulp ◽  
Biomechanical Properties ◽  
Biological Properties ◽  
Osteogenic Potential ◽  
Proliferation Capacity ◽  
Beta Tricalcium Phosphate ◽  
Plastic Surface

Bone innate ability to repair without scaring is surpassed by major bone damage. Current gold-standard strategies do not achieve a full recovery of bone biomechanical properties. To bypass these limitations, tissue engineering techniques based on hybrid materials made up of osteoprogenitor cells, like mesenchymal stem cells (MSCs), and bioactive ceramic scaffolds, like calcium phosphate-based (CaPs), are promising. Biological properties of the MSCs, are influenced by the tissue source. The aim of this study is to define the MSC source and construct (MSC and scaffold combination) most interesting for its clinical application in bone regeneration. iTRAQ generated the hypothesis that anatomical proximity to bone has a direct effect on MSC phenotype. MSCs were isolated from adipose tissue, bone marrow and dental pulp. MSCs were cultured both on plastic surface and on CaPs (hydroxyapatite and &beta;-tricalcium phosphate) to compare their biological features. On plastic, MSCs isolated from dental pulp (DPSCs) were the MSCs with the highest proliferation capacity and the greatest osteogenic potential. On both CaPs, DPSCs are the MSCs with the greatest capacity to colonize bioceramics. Furthermore, results show a trend for DPSCs are the MSCs with the most robust increase in the ALP activity. We propose DPSCs as a suitable MSCs for bone regeneration cell-based strategies.What do you want to do ?New mailCopy

Dental pulp stem cells from traumatically exposed pulps exhibited an enhanced osteogenic potential and weakened odontogenic capacity

2013 ◽  
Vol 58 (11) ◽  
pp. 1709-1717 ◽  
Author(s):  
Yanping Wang ◽  
Ming Yan ◽  
Zhanwei Wang ◽  
Jintao Wu ◽  
Zilu Wang ◽  
...  
Keyword(s):  
Stem Cells ◽  
Dental Pulp ◽  
Dental Pulp Stem Cells ◽  
Osteogenic Potential
Sign in / Sign up

Export Citation Format

Share Document