High-Efficient Biped Walking Based on Flat-Footed Passive Dynamic Walking with Mechanical Impedance at Ankles

2012 ◽  
Vol 24 (3) ◽  
pp. 498-506 ◽  
Author(s):  
Yuta Hanazawa ◽  
◽  
Masaki Yamakita
Keyword(s):  
Energy Efficient ◽  
Mechanical Impedance ◽  
Biped Robot ◽  
Dynamic Walking ◽  
Passive Dynamic Walking ◽  
Biped Robots ◽  
Biped Walking ◽  
Double Support ◽  
High Efficient ◽  
Support Phase

In this paper, we present novel biped walking based on flat-footed Passive Dynamic Walking (PDW) with mechanical impedance at the ankles. To realize biped robot achieving high-efficient walking, PDW has attracted attention. Recently, flat-footed passive dynamic walkers with mechanical impedance at the ankles have been proposed. We show that this passive walker achieves fast, energy-efficient walking using ankle springs and inerters. For this reason, we propose novel biped walking control that mimics PDW to realize biped robots achieving fast, energy-efficient walking on level ground. First, we design a flat-footed biped robot that achieves fast, energy-efficient PDW. To achieve walking based on PDW, the biped robot then takes advantage of a virtual gravitational field that is generated by actuators. The biped robot also pushes off with the foot in the double-support phase to restore energy. By walking simulation, we show that a flat-footed biped robot achieves fast, energy-efficient walking on level ground by the proposed method.

scholarly journals Effects of Torso Pitch Motion on Energy Efficiency of Biped Robot Walking

2021 ◽  
Vol 11 (5) ◽  
pp. 2342
Author(s):  
Long Li ◽  
Zhongqu Xie ◽  
Xiang Luo ◽  
Juanjuan Li
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Biped Robot ◽  
Gait Pattern ◽  
Pattern Generation ◽  
Biped Robots ◽  
Pitch Motion ◽  
Double Support ◽  
Gait Parameters ◽  
Support Phase

Gait pattern generation has an important influence on the walking quality of biped robots. In most gait pattern generation methods, it is usually assumed that the torso keeps vertical during walking. It is very intuitive and simple. However, it may not be the most efficient. In this paper, we propose a gait pattern with torso pitch motion (TPM) during walking. We also present a gait pattern with torso keeping vertical (TKV) to study the effects of TPM on energy efficiency of biped robots. We define the cyclic gait of a five-link biped robot with several gait parameters. The gait parameters are determined by optimization. The optimization criterion is chosen to minimize the energy consumption per unit distance of the biped robot. Under this criterion, the optimal gait performances of TPM and TKV are compared over different step lengths and different gait periods. It is observed that (1) TPM saves more than 12% energy on average compared with TKV, and the main factor of energy-saving in TPM is the reduction of energy consumption of the swing knee in the double support phase and (2) the overall trend of torso motion is leaning forward in double support phase and leaning backward in single support phase, and the amplitude of the torso pitch motion increases as gait period or step length increases.

Suppression of Period-Doubling Bifurcation in Passive Dynamic Walking With Delayed Feedback Control

2012 ◽  
Author(s):  
Yuji Harata ◽  
Koji Iwano ◽  
Fumihiko Asano ◽  
Takashi Ikeda
Keyword(s):  
Feedback Control ◽  
Walking Speed ◽  
Period Doubling ◽  
Delayed Feedback ◽  
Period Doubling Bifurcation ◽  
Delayed Feedback Control ◽  
Dynamic Walking ◽  
Passive Dynamic Walking ◽  
Double Support ◽  
Support Phase

This paper investigates the effect of period-doubling bifurcation on passive dynamic walking (PDW) of a compass-like biped robot which consists of three point masses and two legs. The gait pattern of the robot consists of a single-support phase and a double-support phase which occurs instantaneously. The support and swing legs are exchanged at the double-support phase. Period-doubling bifurcation of PDW occurs when the slope angle of the ground becomes large, and the robot walks with a long step and a short step, alternately. Hip torque is designed based on delayed feedback control (DFC) to suppress the bifurcation. The equation of motion for the robot is numerically integrated and the walking speed is calculated. The simulation results show an increase in walking speed after a period-two gait emerges. Then, DFC is applied to the gait and stabilizes it to a period-one gait. After a period-four gait emerges, DFC is also applied to the period-four gait and stabilize it to period-two and period-one gaits. By comparing the period-one gait with the period-four and the period-two gaits, it is shown that the period-two gait has the fastest mean walking speed. The effect of the robot parameters is investigated and it is shown that the fastest walking speed for the period-one gait can be obtained when a leg mass position is chosen to a certain value.

The Effect of the Toe on the Biped Robot

2013 ◽  
Vol 325-326 ◽  
pp. 1076-1082
Author(s):  
Seyed Mehdi Torklarki ◽  
Mohammad Danesh
Keyword(s):  
Reaction Force ◽  
Stability Margin ◽  
Biped Robot ◽  
Body Motion ◽  
Upper Body ◽  
Biped Robots ◽  
Double Support ◽  
The Stability ◽  
Single Support Phase ◽  
Support Phase

Evaluation of 9-DOF biped robots based on designated smooth and stable trajectories with two added toes is a challenging problem that is the focus of this paper. Simultaneously rotation of feet and toes is considered, which allows the robot to walk more efficiently and like a human being. A desired trajectory for the lower body is designed to increase the stability margin. This obtained by fitting proper polynomials at appropriate break points. Then, the upper body motion is planned based on the Zero Moment Point (ZMP) criterion to provide a stable motion for the biped robot. Next, dynamics equations are obtained for both single support phase (SSP) and double support phase (DSP). On the other hand, two biped robots, which one accompanied by toes, are also compared. Simulation results reveal that the biped robots with toes have better stability margin, less power consumption and more vertical reaction force.

scholarly journals Trajectory Planning of Flexible Walking for Biped Robots Using Linear Inverted Pendulum Model and Linear Pendulum Model

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1082
Author(s):  
Long Li ◽  
Zhongqu Xie ◽  
Xiang Luo ◽  
Juanjuan Li
Keyword(s):  
Trajectory Planning ◽  
Inverted Pendulum ◽  
Negative Impact ◽  
Center Of Mass ◽  
Biped Robot ◽  
Biped Robots ◽  
Double Support ◽  
Inverted Pendulum Model ◽  
Pendulum Model ◽  
Support Phase

Linear inverted pendulum model (LIPM) is an effective and widely used simplified model for biped robots. However, LIPM includes only the single support phase (SSP) and ignores the double support phase (DSP). In this situation, the acceleration of the center of mass (CoM) is discontinuous at the moment of leg exchange, leading to a negative impact on walking stability. If the DSP is added to the walking cycle, the acceleration of the CoM will be smoother and the walking stability of the biped will be improved. In this paper, a linear pendulum model (LPM) for the DSP is proposed, which is similar to LIPM for the SSP. LPM has similar characteristics to LIPM. The dynamic equation of LPM is also linear, and its analytical solution can be obtained. This study also proposes different trajectory-planning methods for different situations, such as periodic walking, adjusting walking speed, disturbed state recovery, and walking terrain-blind. These methods have less computation and can plan trajectory in real time. Simulation results verify the effectiveness of proposed methods and that the biped robot can walk stably and flexibly when combining LIPM and LPM.

A force-resisting balance control strategy for a walking biped robot under an unknown, continuous force

Robotica ◽  
2014 ◽  
Vol 34 (7) ◽  
pp. 1495-1516
Author(s):  
Yeoun-Jae Kim ◽  
Joon-Yong Lee ◽  
Ju-Jang Lee
Keyword(s):  
External Force ◽  
Control Strategy ◽  
Balance Control ◽  
Biped Robot ◽  
Second Step ◽  
Double Support ◽  
Zero Moment ◽  
External Forces ◽  
Single Support Phase ◽  
Support Phase

SUMMARYIn this paper, we propose and examine a force-resisting balance control strategy for a walking biped robot under the application of a sudden unknown, continuous force. We assume that the external force is acting on the pelvis of a walking biped robot and that the external force in the z-direction is negligible compared to the external forces in the x- and y-directions. The main control strategy involves moving the zero moment point (ZMP) of the walking robot to the center of the robot's sole resisting the externally applied force. This strategy is divided into three steps. The first step is to detect an abnormal situation in which an unknown continuous force is applied by examining the position of the ZMP. The second step is to move the ZMP of the robot to the center of the sole resisting the external force. The third step is to have the biped robot convert from single support phase (SSP) to double support phase (DSP) for an increased force-resisting capability. Computer simulations and experiments of the proposed methods are performed to benchmark the suggested control strategy.

Sign in / Sign up

Export Citation Format

Share Document