Microsilica and Waste Glass Powder as Partial replacement of Portland Cement: Electrochemical Study on the Corrosion Performance of Steel Rebar in the Blended Concrete

2020 ◽  
pp. 12291-12301
Author(s):  
Guangjuan Gu ◽  
Keyword(s):  
Portland Cement ◽  
Glass Powder ◽  
Waste Glass ◽  
Electrochemical Study ◽  
Partial Replacement ◽  
Corrosion Performance ◽  
Steel Rebar ◽  
Waste Glass Powder

scholarly journals Mechanical Properties of Mortars Containing Waste Glass Powder

2019 ◽  
Vol 50 (1) ◽  
pp. 30-34 ◽  
Author(s):  
Elżbieta Horszczaruk ◽  
Piotr Brzozowski
Keyword(s):  
Construction Industry ◽  
Co2 Emission ◽  
Glass Powder ◽  
Waste Glass ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Glass Cullet ◽  
Glass Waste ◽  
Waste Glass Powder ◽  
Creative Construction

The utilization of solid waste materials or industrial waste as partial substitution of cement is growing in construction industry all around world. Less cement consumption causes consequently reduction in CO2 emission into the atmosphere and reduction in energy consumption. This paper examines the possibility of using finely ground waste glass as a partial replacement for cement and as a sealing admixture. Glass powder used in the research was prepared from the glass waste obtained from a local recycling company. Glass cullet made of brown glass, which after rinsing to remove sugars and other impurities, was dried and ground to a fraction below 125 μm.This paper is the revised version of the paper that has been published in the Proceedings of the Creative Construction Conference 2018 (Horszczaruk and Brzozowski, 2018).

scholarly journals Effect of Partial Replacement of Crushed Stone Dust Filler with Waste Glass Powder in Hot Mix Asphalt Concrete Production

2020 ◽  
Author(s):  
Destaw Kifile ◽  
Emer Quezon ◽  
Abel Tesfaye
Keyword(s):  
Glass Powder ◽  
Hot Mix Asphalt ◽  
Road Construction ◽  
Waste Glass ◽  
Crushed Stone ◽  
Partial Replacement ◽  
Waste Glass Powder ◽  
Stone Dust ◽  
Concrete Production ◽  
Bitumen Content

The use of waste recycled materials in road construction nowadays considered a positive means of providing improved pavement performance. This research focused on evaluating the effect of waste glass powder as a partial replacement of crushed stone dust filler in hot mix asphalt. Three hot mix asphalt samples produced using crushed stone dust of 5%, 6.5%, and 8% as mineral filler with five different bitumen content of 4%, 4.5%, 5%, 5.5%, and 6%, respectively. From the preliminary series tests of asphalt contents, a 6.5% crushed stone dust filler selected, providing the highest stability of waste glass powder. The content of crushed stone dust filler replaced with a rate of 0%, 25%, 50%, 75%, and 100% to test Marshal stability to obtain the Optimum bitumen content and Optimum filler content. Results indicated at 75% replacement of crushed stone dust with waste glass powder at 5.10% bitumen content, 12.0kN Marshall stability value, 2.84mm Flow value, 4.0% Air voids, 72.3% VFB, and 2.360g/cm3 Bulk density. Hence, the mixture of 75% waste glass powder by weight of crushed stone dust filler meets the minimum requirements of the Ethiopian Road Authority and Asphalt Institute Specifications.

Sign in / Sign up

Export Citation Format

Share Document