scholarly journals Effect of solid-solution temperature on microstructure of incoloy825 alloy and its corrosion behavior in a polluted marine environment

2020 ◽  
pp. 1704-1712 ◽  
Author(s):  
Min Zhu ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Behavior ◽  
Marine Environment ◽  
Solution Temperature

scholarly journals Selective Anisotropy of Mechanical Properties in Inconel718 Alloy

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3869
Author(s):  
Yu Liang ◽  
Jun Ma ◽  
Baogang Zhou ◽  
Wei Li
Keyword(s):  
Solid Solution ◽  
Crack Nucleation ◽  
Rolling Direction ◽  
Mechanical Anisotropy ◽  
Solution Temperature ◽  
Weak Anisotropy ◽  
Nucleation Sites ◽  
Micro Cracks ◽  
Δ Phase ◽  
Rupture Properties

Mechanical anisotropy behaviors are investigated in slightly rolled Inconel718 alloy with string-like δ phase and carbides produced during various solid-solution and aging treatments. A weak anisotropy in the strengths and rupture properties at 650 °C is visible, whereas ductility, i.e., reduction in area (RA) and impact toughness (CVN), presents a sound anisotropy behavior. MC carbides promote the operation of slip systems and thus are conducive to weakening the strength anisotropy. The RA anisotropy mainly stems from high-density δ phase particles that provide more crack nucleation sites and stimulate rapid propagation because of the shorter bridge distance between micro-cracks at the rolling direction. In contrast, CVN anisotropy arises from both δ phase and carbides at a lower solid-solution temperature of 940 °C but only depends on carbides at 980 °C where the δ phase fully dissolves. Apart from dislocation motions operated at room temperature, the activated grain boundary processes are responsible for the weak anisotropy of rupture properties at the elevated temperature. This work provides a guideline for technological applications in the hot working processes for Inconel718 alloys.

scholarly journals Effect of Fluid Flow on the Corrosion Performance of as-Cast and Heat-Treated Nickel Aluminum Bronze Alloy (UNS C95800) in Saline Solution

2021 ◽  
Vol 2 (1) ◽  
pp. 61-77
Author(s):  
Hamid Reza Jafari ◽  
Ali Davoodi ◽  
Saman Hosseinpour
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Flow Rate ◽  
Solution Temperature ◽  
Aluminum Bronze ◽  
Nickel Aluminum ◽  
Nacl Solution ◽  
Flow Conditions ◽  
Heat Treated ◽  
Nickel Aluminum Bronze

In this work, the corrosion behavior and surface reactivity of as-cast and heat-treated nickel aluminum bronze casting alloy (UNS C95800) in 3.5 wt% NaCl solution is investigated under stagnant and flow conditions. Increasing flow rate conditions are simulated using a rotating disk electrode from 0 to 9000 revolutions per minute (rpm). Optical micrographs confirm the decrease in the phase fraction of corrosion-sensitive β phase in the microstructure of C95800 after annealing, which, in turn, enhances the corrosion resistance of the alloy. Electrochemical studies including open circuit potentiometry, potentiodynamic polarization, and electrochemical impedance spectroscopy are performed to assess the effect of flow rate and heat treatment on the corrosion of samples at 25 and 40 °C in 3.5 wt% NaCl solution. For both as-cast and heat-treated samples, increasing the flow rate (i.e., electrode rotating rate) linearly reduces the corrosion resistance, indicating that the metal dissolution rate is significantly affected by hydrodynamic flow. Increasing the solution temperature negatively impacts the corrosion behavior of the as-cast and heat-treated samples at all flow conditions.

scholarly journals Effects of Different Solid Solution Temperatures on Microstructure and Mechanical Properties of the AA7075 Alloy After T6 Heat Treatment

2019 ◽  
Vol 38 (2019) ◽  
pp. 892-896 ◽  
Author(s):  
Süleyman Tekeli ◽  
Ijlal Simsek ◽  
Dogan Simsek ◽  
Dursun Ozyurek
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Solid Solution ◽  
Tensile Strength ◽  
Tensile Tests ◽  
Solution Temperature ◽  
T6 Heat Treatment ◽  
Microstructure And Mechanical Properties ◽  
Different Temperatures

AbstractIn this study, the effect of solid solution temperature on microstructure and mechanical properties of the AA7075 alloy after T6 heat treatment was investigated. Following solid solution at five different temperatures for 2 hours, the AA7075 alloy was quenched and then artificially aged at 120∘C for 24 hours. Hardness measurements, microstructure examinations (SEM+EDS, XRD) and tensile tests were carried out for the alloys. The results showed that the increased solid solution temperature led to formation of precipitates in the microstructures and thus caused higher hardness and tensile strength.

scholarly journals FUNDAMENTAL STUDY ON EVALUATION FOR TIME-DEPENDENT CORROSION BEHAVIOR OF LONG STEEL MEMBERS IN MARINE ENVIRONMENT

2009 ◽  
Vol 65 (2) ◽  
pp. 440-453 ◽  
Author(s):  
Shigenobu KAINUMA ◽  
Naofumi HOSOMI ◽  
Atsushi GOTO ◽  
Yoshito ITOH
Keyword(s):  
Corrosion Behavior ◽  
Marine Environment ◽  
Time Dependent ◽  
Fundamental Study ◽  
Steel Members

Effect of Rare Earth (RE) La on Solid Solution of Second Phase Particle and Austenite Grain Growth in Steel Containing High Niobium

2011 ◽  
Vol 189-193 ◽  
pp. 2869-2874 ◽  
Author(s):  
Wen Zhong Song ◽  
Qi Fang ◽  
Hui Ping Ren ◽  
Zi Li Jin ◽  
Hui Chang
Keyword(s):  
Solid Solution ◽  
Growth Rate ◽  
Rare Earth ◽  
Grain Growth ◽  
Phase Particle ◽  
Solution Temperature ◽  
Second Phase ◽  
Austenite Grain ◽  
Austenite Grain Growth ◽  
Soaking Temperature

The solid solution of the second phase particle and austenite grain growth behavior of the high niobium-containing RE steel was studied by mathematical calculation and extraction replica technique. The purpose of the study was to investigate the effects of Rare Earth La on austenite grain growth and propose an empirical equation for predicting the austenite grain size of RE steel. Austenite grain grows in an exponential law with the increase of heating temperature, while approximately in a parabolic law with the increase of holding time. Results show that the RE steel has good anti-coarsening ability at elevated temperatures. When soaking temperature is lower than 1250°C , AGS and growth rate are small for high niobium steel, but soaking temperature is lower than 1220°C , AGS and growth rate are small for RE steel. RE La can promote solid solution of second-phase particles Nb(C, N), the solution temperature decrease 30°C than high niobium steel.

Effect of Bi Addition on the Corrosion Behavior of Zirconium Alloys

2013 ◽  
Author(s):  
M. Y. Yao ◽  
B. X. Zhou ◽  
Q. Li ◽  
W. P. Zhang ◽  
L. Zhu ◽  
...  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Mass Fraction ◽  
Zirconium Alloys ◽  
Deionized Water ◽  
Second Phase ◽  
Micro Structure ◽  
Second Phase Particles ◽  
Structure Observation

In order to investigate systematically the effect of Bi addition on the corrosion resistance of zirconium alloys, different zirconium-based alloys, including Zr-4 (Zr-1.5Sn-0.2Fe-0.1Cr), S5 (Zr-0.8Sn-0.35Nb-0.4Fe-0.1Cr), T5 (Zr-0.7Sn-1.0Nb-0.3Fe-0.1Cr) and Zr-1Nb, were adopted to prepare the zirconium alloys containing Bi of 0∼0.5% in mass fraction. These alloys were denoted as Zr-4+xBi, S5+xBi, T5+xBi and Zr-1Nb+xBi, respectively. The corrosion behavior of these specimens was investigated by autoclave testing in lithiated water with 0.01 M LiOH or deionized water at 360°C/18.6 MPa and in superheated steam at 400 °C/10.3 MPa. The micro structure of the alloys was examined by TEM and the second phase particles (SPPs) were analyzed by EDS. Micro structure observation shows that the addition of Bi promotes the precipitation of Sn as second phase particles (SPPs) because Sn is in solid solution in α-Zr matrix in Zr-4, S5 and T5 alloys. The concentration of Bi dissolved in α-Zr matrix increase with the increase of Nb in the alloys, and the excess Bi precipitates as Bi-containing SPPs. The corrosion results show that the effect of Bi addition on the corrosion behavior of different zirconium-based alloys is very complicated, depending on their compositions and corrosion conditions. In the case of higher Bi concentration in α-Zr, the zirconium alloys exhibit better corrosion resistance. However, in the case of precipitation of Bi-containing SPPs, the corrosion resistance gets worse. This indicates that the solid solution of Bi in α-Zr matrix can improve the corrosion resistance, while the precipitation of the Bi-containing SPPs is harmful to the corrosion resistance.

scholarly journals Corrosion behavior of 1Cr18Ni9Ti–1Cr11Ni2W2MoV galvanic couples in a simulated marine environment

AIP Advances ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 015115
Author(s):  
Huaqiang Zhu ◽  
Fengkun Liu ◽  
Kailin Long
Keyword(s):  
Corrosion Behavior ◽  
Marine Environment ◽  
Galvanic Couples

Effect of Heat Treatment on the Structure and Properties of EW75 Magnesium Alloy Plate

2013 ◽  
Vol 747-748 ◽  
pp. 158-165
Author(s):  
Juan Qu ◽  
Kui Zhang ◽  
Ming Long Ma ◽  
Yong Jun Li ◽  
Xing Gang Li
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Tensile Strength ◽  
Solution Process ◽  
Solution Time ◽  
Solution Temperature ◽  
Second Phase ◽  
Alloy Plate ◽  
T6 Heat Treatment ◽  
The Matrix

In this study, Mg-7Gd-5Y-1Nd-0.5Zr alloy (EW75) was produced by melting method and then press-forged into large size plate. The properties of the Mg-7Gd-5Y-1.2Nd-0.5Zr alloy were optimized through T6 heat treatment. The microstructures of alloy were observed by means of optical microscopy (OM), scanning electron microscopy (SEM). Its mechanical properties under different heat treatment conditions were determined by tensile tests. The results indicated that increasing the solid solution temperature and prolonging the solid solution time can both lead to the dissolution of second phase in the alloy back into the matrix. The solid solution temperature affects the dissolution process more than the solid solution time. Grain growth occurred during the solid solution process. The grain size of the matrix enlarges with the increase of solid solution temperature. The tensile test result showed that the tensile strength of the alloy was significantly improved after T6 heat treatment. Its tensile strength in the same direction was nearly 40% up after T6 heat treatment. The analysis shows that T6 heat treatment can effectively eliminate the larger deformed precipitates and beneficial to the formation of hard precipitates, which leads to an improvement in the alloys tensile strength.

Sign in / Sign up

Export Citation Format

Share Document