Electrochemical corrosion resistance and wear behavior of Ni-P- ZrO2 Composite Coatings prepared by Magnetically-Assisted Jet-Electrodeposition

2020 ◽  
pp. 816-829
Author(s):  
Fu Xiu-qing ◽  
Keyword(s):  
Corrosion Resistance ◽  
Wear Behavior ◽  
Composite Coatings ◽  
Electrochemical Corrosion ◽  
Jet Electrodeposition ◽  
Electrochemical Corrosion Resistance ◽  
Magnetically Assisted

scholarly journals Effect of Current Density on the Performance of Ni–P–ZrO2–CeO2 Composite Coatings Prepared by Jet-Electrodeposition

Coatings ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 616
Author(s):  
Zhaoyang Song ◽  
Hongwen Zhang ◽  
Xiuqing Fu ◽  
Jinran Lin ◽  
Moqi Shen ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Current Density ◽  
Composite Coatings ◽  
Electrochemical Corrosion ◽  
Corrosion Current ◽  
X Ray Diffraction ◽  
X Ray ◽  
Jet Electrodeposition ◽  
Electrochemical Corrosion Resistance

The objective of this study was to improve the surface properties, hardness, wear resistance and electrochemical corrosion resistance of #45 steel. To this end, Ni–P–ZrO2–CeO2 composite coatings were prepared on the surface of #45 steel using the jet-electrodeposition technique by varying the current density from 20 to 60 A/dm2. The effect of current density on the performance of the composite coatings was evaluated. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) were applied to explore the surface topography, elemental composition, hardness and electrochemical corrosion resistance of the composite coatings. The results showed that with the increase in the current density, the hardness, wear resistance, and electrochemical corrosion resistance tends to increase first and then decrease. At a current density of 40 A/dm2, the hardness reached a maximum of 688.9 HV0.1, the corrosion current reached a minimum of 8.2501 × 10−5 A·cm−2, and the corrosion potential reached a maximum of −0.45957 V. At these values, the performance of the composite coatings was optimal.

scholarly journals Electrophoretic Co-deposition of Polyetheretherketone and Graphite Particles: Microstructure, Electrochemical Corrosion Resistance, and Coating Adhesion to a Titanium Alloy

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3251 ◽  
Author(s):  
Aleksandra Fiołek ◽  
Sławomir Zimowski ◽  
Agnieszka Kopia ◽  
Alicja Łukaszczyk ◽  
Tomasz Moskalewicz
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Composite Coatings ◽  
Electrochemical Techniques ◽  
Electrochemical Corrosion ◽  
Graphite Particles ◽  
Peek Composite ◽  
Electrochemical Corrosion Resistance

The present study explores the possibilities of fabricating a graphite/polyetheretherketone (PEEK) composite coating on a Ti-6Al-4V titanium alloy through duplex treatment consisting of electrophoretic deposition (EPD) and heat treatment. It has been found that the electrophoretic co-deposition of graphite and PEEK microparticles can be performed from environmentally-friendly pure ethanolic suspensions. Zeta potential measurements and a study of the interaction between both particle types with the use of transmission electron microscopy allowed potential mechanisms of particle co-deposition to be indicated. Microstructure characterization was performed on macro-, micro- and nanoscale using visible light microscopy, X-ray diffractometry and electron microscopy. This allowed the coating homogeneity and distribution of graphite particles in the polymer matrix to be described. Graphite particles in the form of graphene nanosheet packages were relatively evenly distributed in the coating matrix and oriented parallel to the coating surface. The heat-treated coatings showed high scratch resistance and no adhesive type destruction was observed, but they were highly susceptible to deformation. The corrosion measurements were performed with use of electrochemical techniques like open circuit potential and linear sweep voltamperometry. The coated alloy indicated better electrochemical corrosion resistance compared with the uncoated alloy. This work showed the high versatility of the electrophoretic co-deposition of graphite and PEEK particles, which combined with post-EPD heat treatment allows composite coatings to be fabricated with controlled distribution of graphite particles.

scholarly journals Microstructure and Corrosion Resistance of Underwater Laser Cladded Duplex Stainless Steel Coating after Underwater Laser Remelting Processing

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4965
Author(s):  
Congwei Li ◽  
Jialei Zhu ◽  
Zhihai Cai ◽  
Le Mei ◽  
Xiangdong Jiao ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Phase Composition ◽  
Duplex Stainless Steel ◽  
Electrochemical Corrosion ◽  
Chemical Components ◽  
Laser Remelting ◽  
Underwater Environment ◽  
Underwater Laser ◽  
Electrochemical Corrosion Resistance

Combined with the technologies of underwater local dry laser cladding (ULDLC) and underwater local dry laser remelting (ULDLR), a duplex stainless steel (DSS) coating has been made in an underwater environment. The phase composition, microstructure, chemical components and electrochemical corrosion resistance was studied. The results show that after underwater laser remelting, the phase composition of DSS coating remains unchanged and the phase transformation from Widmanstätten austenite + intragranular austenite + (211) ferrite to (110) ferrite occurred. The ULDLR process can improve the corrosion resistance of the underwater local dry laser cladded coating. The corrosion resistance of remelted coating at 3 kW is the best, the corrosion resistance of remelted coating at 1kW and 5kW is similar and the corrosion resistance of (110) ferrite phase is better than grain boundary austenite phase. The ULDLC + ULDLR process can meet the requirements of efficient underwater maintenance, forming quality control and corrosion resistance. It can also be used to repair the surface of S32101 duplex stainless steel in underwater environment.

Appraisal on corrosion performances of CrNi, TiAlN/CrNi and CrNi–Al2O3–TiO2 coatings on H13 hot work mold

2020 ◽  
Vol 67 (2) ◽  
pp. 150-157
Author(s):  
Kong Dejun ◽  
Li Jiahong
Keyword(s):  
Corrosion Resistance ◽  
Salt Spray ◽  
Test Chamber ◽  
Electrochemical Corrosion ◽  
Optical Microscope ◽  
Electrochemical Performances ◽  
X Ray Diffraction ◽  
H13 Steel ◽  
Content Type ◽  
Electrochemical Corrosion Resistance

Purpose The purpose of this paper is to evaluate the salt spray corrosion (SSC) and electrochemical corrosion performances of CrNi, TiAlN/NiCr and CrNi–Al2O3–TiO2 coatings on H13 steel, which improved the corrosion resistance of H13 hot work mold. Design/methodology/approach CrNi, TiAlN/NiCr and CrNi–Al2O3–TiO2 coatings were fabricated on H13 hot work mold steel using a laser cladding and cathodic arc ion plating. The SSC and electrochemical performances of obtained coatings were investigated using a corrosion test chamber and electrochemical workstation, respectively. The corrosion morphologies, microstructure and phases were analyzed using an electron scanning microscope, optical microscope and X-ray diffraction, respectively, and the mechanisms of corrosion resistance were also discussed. Findings The CrNi coating is penetrated by corrosion media, producing the oxide of Fe3O4 on the coating surface; and the TiAlN coating is corroded to enter into the CrNi coating, forming the oxides of TiO and NiO, the mechanism is pitting corrosion, whereas the CrNi–Al2O3–TiO2 coating is not penetrated, with no oxides, showing the highest SSC resistance among the three kinds of coatings. The corrosion potential of CrNi coating, TiAlN/CrNi and CrNi–Al2O3–TiO2 coatings was –0.444, –0.481 and –0.334 V, respectively, and the corresponding polarization resistances were 3,074, 2,425 and 86,648 cm2, respectively. The electrochemical corrosion resistance of CrNi–Al2O3–TiO2 coating is the highest, which is enhanced by the additions of Al2O3 and TiO2. Originality/value The CrNi, TiAlN/CrNi and CrNi–Al2O3–TiO2 coatings on H13 hot work mold were firstly evaluated by the SSC and electrochemical performances.

Sign in / Sign up

Export Citation Format

Share Document