scholarly journals Generación de energía eléctrica en la edificación mediante tecnología de disco Stirling =Electrical energy generation in building by means of Stirling dish technology

2017 ◽  
Vol 3 (2) ◽  
pp. 9
Author(s):  
Carlos Morón ◽  
Daniel Ferrández ◽  
Jorge Pablo Díaz ◽  
Pablo Saiz

ResumenLa creciente demanda de energía acompañada de los elevados niveles de emisión de gases contaminantes a la atmosfera hace patente la necesidad de encontrar nuevos sistemas de producción de energía. Una de las posibles alternativas se encuentra en la energía solar de concentración, y más concretamente en la tecnología termosolar con motor Stirling que alcanza unos niveles de rendimiento muy superiores a la energía solar fotovoltaica en cuanto a producción de energía eléctrica. En este trabajo se muestra el diseño y la caracterización de un prototipo de captador paraboloidal con motor Stirling, que permite obtener datos reales del funcionamiento de este tipo de sistemas. Esto permitirá modelizar de manera real el comportamiento esperado de equipos comerciales reales antes de abordar su implantación en edificios y viviendas unifamiliares.AbstractThe increasing demand for energy accompanied by high level of emission of the contaminating gases into the atmosphere underscores the need to find new energy production systems. One of the possible alternatives is concentrating solar power and, more specifically, solar thermal technology with a Stirling engine that reaches higher performance levels than photovoltaic solar energy in terms of electricity generation. This paper shows the design and characterization of a prototype paraboloidal collector with a Stirling engine that allows obtaining real data of this type of systems functioning. This will allow modelling in a real way of expected performance of real commercial devices before approaching their introduction in buildings and single-family houses.

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 991
Author(s):  
Ana Maria Figueira Gomes ◽  
David Draper ◽  
Nascimento Nhantumbo ◽  
Rafael Massinga ◽  
José C. Ramalho ◽  
...  

Cowpea (Vigna unguiculata) is a neglected crop native to Africa, with an outstanding potential to contribute to the major challenges in food and nutrition security, as well as in agricultural sustainability. Two major issues regarding cowpea research have been highlighted in recent years—the establishment of core collections and the characterization of landraces—as crucial to the implementation of environmentally resilient and nutrition-sensitive production systems. In this work, we have collected, mapped, and characterized the morphological attributes of 61 cowpea genotypes, from 10 landraces spanning across six agro-ecological zones and three provinces in Mozambique. Our results reveal that local landraces retain a high level of morphological diversity without a specific geographical pattern, suggesting the existence of gene flow. Nevertheless, accessions from one landrace, i.e., Maringué, seem to be the most promising in terms of yield and nutrition-related parameters, and could therefore be integrated into the ongoing conservation and breeding efforts in the region towards the production of elite varieties of cowpea.


2014 ◽  
Vol 590 ◽  
pp. 878-882 ◽  
Author(s):  
P.D. Gaspar ◽  
P.D. Silva ◽  
J. Nunes ◽  
L.P. Andrade

This paper provides a characterization of the electrical energy consumption of agrifood industries located in the central region of Portugal that use refrigeration systems to ensure the food safety. The study is based on the result analysis of survey data and energy characteristics of the participating companies. The agrifood industries included in the survey belong to the following sector: meat, dairy, horticultural, distribution and wine. The comparison of energy indicators for the specific electrical energy consumption of companies of a sector and between sectors is analysed and discussed, providing reference levels for the energy performance of agrifood industries. Since the agrifood sector accounts for high level of energy consumption, the energy performance level knowledge can promote the rational use of energy as well as helping on the decision making of practice measures for the improvement of the energy efficiency.


2020 ◽  
Vol 2020 (10) ◽  
pp. 19-33
Author(s):  
Nadiia NOVYTSKA ◽  
◽  
Inna KHLIEBNIKOVA ◽  

The market of tobacco products in Ukraine is one of the most dynamic and competitive. It develops under the influence of certain factors that cause structural changes, therefore, the aim of the article is to conduct a comprehensive analysis of transformation processes in the market of tobacco and their alternatives in Ukraine and identify the factors that cause them. The high level of tax burden and the proliferation of alternative products with a potentially lower risk to human health, including heating tobacco products and e-cigarettes, are key factors in the market’s transformation process. Their presence leads to an increase in illicit turnover of tobacco products, which accounts for 6.37% of the market, and the gradual replacement of cigarettes with alternative products, which account for 12.95%. The presence on the market of products that are not taxed or taxed at lower rates is one of the reasons for the reduction of excise duty revenues. According to the results of 2019, the planned indicators of revenues were not met by 23.5%. Other reasons for non-fulfillment of excise duty revenues include: declining dynamics of the tobacco products market; reduction in the number of smokers; reorientation of «cheap whites» cigarette flows from Ukraine to neighboring countries; tax avoidance. Prospects for further research are identified, namely the need to develop measures for state regulation and optimization of excise duty taxation of tobacco products and their alternatives, taking into account the risks to public health and increasing demand of illegal products.


2020 ◽  
Vol 13 (11) ◽  
pp. 1
Author(s):  
A. R. B. Zanco ◽  
A. Ferreira ◽  
G. C. M. Berber ◽  
E. N. Gonzaga ◽  
D. C. C. Sabino

The different integrated production systems can directly interfere with its bacterial community. The present study aimed to assess density, bacterial diversity and the influence of dry and rainy season in different integrated and an exclusive production system. The fallow and a native forest area was assessed to. Samples were collected in 2012 March and September. The isolation were carried out into Petri dishes containing DYGS medium. The number of colony forming units (CFU) was counted after 48 hours and. The bacterial density ranged between 106 and 107 CFU g-1 soil. The crop system affected the dynamics of the bacterial community only in the rainy season. The rainy season showed greater density of total bacteria when compared to the dry period regardless of the cropping system. The dendrograms with 80 % similarity showed thirteen and fourteen groups in the rainy and dry seasons. Isolates with the capacity to solubilize phosphate in vitro were obtained from all areas in the two seasons, but this feature has been prevalent in bacteria isolated during the rainy season


Author(s):  
Martin Krzywdzinski

This chapter deals with the dependent variable of the study: consent. It analyses workplace consent in Russia and China using three indicators that refer to the core requirements of the production systems in automotive companies regarding employee behavior: first, standardized work; and second, compliance with expectations in terms of flexibility, cooperation, and a commitment to improving processes. The third indicator of consent (or the lack of it) is the absence or presence of open criticism, resistance, and labor disputes. The chapter reveals significant and unexpected differences between the Chinese and Russian sites on all three indicators. While the Chinese factories exhibit (with some variance between the companies), a relatively high level of consent, the Russian plants have problems with standardized work, the acceptance of performance expectations, and to some extent with labor disputes.


Sign in / Sign up

Export Citation Format

Share Document