scholarly journals Biocompuestos para perfiles avanzados adaptados a la edificación = Biocomposites for Advanced Profiles Adapted to Building Envelope

2016 ◽  
Vol 2 (1) ◽  
pp. 20
Author(s):  
I. Roig ◽  
S. Fita ◽  
O. Menes ◽  
N. Soriano
Keyword(s):  
Modular Design ◽  
State Of The Art ◽  
Processing Parameters ◽  
Building Envelope ◽  
Integrated System ◽  
Natural Fibres ◽  
Structural Elements ◽  
Building Envelopes ◽  
Natural Materials ◽  
Partition Walls

Resumen Compuestos alternativos en el sector de la envolvente se obtienen por extrusión de estirado de secciones y perfiles de panel de enclavamiento estrechas. Estos elementos estructurales, resistentes al impacto, tienen la ventaja de una instalación más rápida y segura, y su diseño modular les hace idóneos para muchos edificios y otras aplicaciones. Un desarrollo adicional en esta área puede ser la obtención de una alternativa sostenible a los perfiles compuestos actuales. Estudios anteriores han demostrado que los compuestos fabricados a partir de materiales naturales tales como fibras y polímeros bio-derivados, ofrecen una alternativa sostenible a los polímeros y materiales compuestos tradicionales. El objetivo de este desarrollo es reemplazar el típico perfil de acero ligero. Los perfiles de acabado también se pueden utilizar para terminar tabiques de mampostería existentes, revestimiento de ejes mecánicos y de extracción y revestimiento de la columna. Los perfiles se han diseñado utilizando bio-polímeros, reforzados con fibras naturales. Se han establecido los parámetros de procesamiento y las formulaciones apropiadas de bioresina y fibras naturales. También se ha evaluado la adaptación de las técnicas de procesamiento de pultrusión existentes a las características concretas de los nuevos biomateriales y fibras naturales. Como resultado, los perfiles de pultrusión adaptados a la construcción se han desarrollado con la incorporación de nuevos materiales y biomateriales basados en resina.Abstract An alternative composites answer in the envelope sector is the fabrication by pultrusion of narrow interlocking panel sections and profiles. These impact-resistant structural elements have the advantage of quicker, safer installation and their modular design equally answers many identical building and other applications¡Error! No se encuentra el origen de la referencia.. An additional development in this area can be the obtaining of a sustainable alternative to current composite profiles. Previous studies have shown that biocomposites manufactured from natural materials such as fibres and bio-derived polymers; offer a sustainable alternative to traditional polymers and composites. The goal of this development is to replace the typical light gauge steel profile with a state of the art bio-composite integrated system. The finish profiles can also be used to finish existing masonry partition walls, cladding mechanical and extraction shafts and column cladding. The profiles have been designed using bio-polymers, reinforced with natural fibres where possible and necessary. Proper formulations of the bioresin, natural fibres and processing parameters have been established. The adaptation of the existing processing pultrusion techniques to the specific characteristics of the new biomaterials and natural fibres has been also assessed. As a result, demonstrators of pultrusion profiles adapted to building envelopes have been carried out incorporating novel materials and bio based resin. 

Verification of Alarm Displays for the Nuclear Power Plant With Two Modular High-Temperature Gas-Cooled Reactors

2018 ◽  
Author(s):  
Jia Qianqian ◽  
Guo Chao ◽  
Li Jianghai ◽  
Qu Ronghong
Keyword(s):  
High Temperature ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Modular Design ◽  
Early Stage ◽  
Integrated System ◽  
Alarm System ◽  
Control Room ◽  
High Temperature Gas

The nuclear power plant with two modular high-temperature gas-cooled reactors (HTR-PM) is under construction now. The control room of HTR-PM is designed. This paper introduces the alarm displays in the control room, and describes some verification and validation (V&V) activities of the alarm system, especially verification for some new human factor issues of the alarm system in the two modular design. In HTR-PM, besides the regular V&V similar to other NPPs, the interference effect of the alarm rings of the two reactor modules at the same time, and the potential discomfort of the two reactor operators after shift between them are focused. Verifications at early stage of the two issues are carried on the verification platform of the control room before the integrated system validation (ISV), and all the human machine interfaces (HMIs) in the control room, including the alarm system are validated in ISV. The test results on the verification platform show that the alarm displays and rings can support the operators understand the alarm information without confusion of the two reactors, and the shift between the two reactor operators have no adverse impact on operation. The results in ISV also show that the alarm system can support the operators well.

scholarly journals Semantic Reconciliation between two Different Aspects of Law

2018 ◽  
Vol 331 ◽  
pp. 131-140
Author(s):  
Bálint Molnár
Keyword(s):  
Life Events ◽  
Integrated System ◽  
Structural Elements ◽  
Legal Cases ◽  
Strongly Coupled ◽  
Legal Rules ◽  
Legal Documents ◽  
Legal Standards ◽  
The Government ◽  
Government Portal

This paper presents a proposal for reconciliation between the warehouse of legal documents created during legislation and Knowledge Warehouse that is dedicated to assisting both citizens and public officers in the procedural legal rules of Public Administration in Hungary. The Knowledge Warehouse contains several thousand detailed rules that describe how to manage and handle life events of citizens. This description can be considered as generic legal cases within legal procedures of authorities. The citizens trigger specific instances of the generic ones. The evolving Knowledge Warehouse main purpose is to enable citizens to get their specific legal cases started either through Web on the Government Portal or with the help of public officers. The Knowledge Warehouse will be extended by ontologies and semantic search capabilities. An Integrated System for Supporting of Codification will be created in an on-going project that will serve as sound basis for the National Warehouse of Legal Rules. The National Warehouse pursues the prescription of MetaLex legal standards in the case of representation of electronic legal documents. The two Warehouse are strongly coupled to each other. However, the syntactic and semantic structure of both differs profoundly. The representation of e-documents within the National Warehouse is in line with ELI, the European Legislation Identifier, even the ontologies and attached semantic description concentrates on the legal documents structural elements and their interpretation. The Knowledge Warehouse focuses on ontologies of life events and procedures of authorities to leverage semantic searching. The proposed solution tries to reconcile and integrate the two differing approaches.

scholarly journals A Comparison Of Building Envelope Performance Levels Between Ontario, Denmark, Germany And The Passive House Standard, In The Low-Rise, Residential Context

2021 ◽  
Author(s):  
Blaine Attwood
Keyword(s):  
Energy Use ◽  
Building Envelope ◽  
Passive House ◽  
Building Envelopes ◽  
Residential Sector ◽  
Greater Toronto Area ◽  
Residential Context ◽  
Minimum Requirements ◽  
Other World ◽  
House Standard

This research compared and analyzed where the Ontario Building Code rates in the low-rise, residential sector in terms of its: in comparison to Denmark, Germany and the Passive House Standard. This was analyzed to see how Ontario compared against other world renowned energy efficient regulations and where or if there was room for improvement. For this, HOT2000 and THERM were utilized on all four of the reference standards, where both of these programs were managed in a way to compare the results of ‘typical’ building envelopes and the current regulation from each of the standards. These results were then able to provide a whole home’s heating and air conditioning energy use in the Greater Toronto Area climate. Overall, the results illustrated Ontario homes consume the most energy for both typically constructed homes and homes utilizing the minimum requirements. In addition to this, Ontario also had the least performing building envelope connection details. In total, the Passive House performed at the highest level followed by Germany, Denmark and then Ontario.

Flex House

2011 ◽  
Author(s):  
Stanley Russell ◽  
Mark Weston ◽  
Yogi Goswami ◽  
Matthew Doll
Keyword(s):  
Closed System ◽  
State Of The Art ◽  
Building Envelope ◽  
Passive Cooling ◽  
Optimum Level ◽  
Seasonal Temperature ◽  
Zero Energy ◽  
Humid Climate ◽  
Heat Gain ◽  
Hot Humid Climate

Flex House is a flexible, modular, pre-fabricated zero energy building that can be mass produced and adapted easily to a variety of site conditions and plan configurations. The key factor shaping the design is central Florida’s hot humid climate and intense solar radiation. Flex house combines the wisdom of vernacular Florida houses with state of the art Zero Energy House technologies (ZEH.) A combined system of photovoltaic panels and solar thermal concentrating panels take advantage of the region’s abundant insolation in providing clean renewable energy for the house. Conservation is achieved with state of the art mechanical systems and innovative liquid desiccant dehumidification technology along with highly efficient lighting and appliances. The hybrid nature of the Flex house allows for both an open and closed system to take advantage of the seasonal temperature variation. Central Florida buildings can conserve energy by allowing natural ventilation to take advantage of passive cooling in the mild months of the year and use a closed system to utilize mechanical cooling when temperatures are too high for passive cooling strategies. The building envelope works equally well throughout the year combining an optimum level of insulation, resistance to air infiltration, transparency for daylight, and flexibility that allows for opening and closing of the house. Flex House is designed with a strong connection between interior spaces and the outdoors with carefully placed fenestration and a movable wall system which enables the house to transform in response to the temperature variations throughout the year. The house also addresses the massive heat gain that occurs through the roof, which can generate temperatures in excess of 140 degrees. Flex House incorporates a parasol-like outer structure that shades the roof, walls and courtyard minimizing heat gain through the building envelope. To be implemented on a large scale, ZEH must be affordable for people earning a moderate income. Site built construction is time consuming and wasteful and results in higher costs. Building homes in a controlled environment can reduce material waste, and construction costs while increasing efficiency. Pre-fabricating Flex House minimizes preparation time, waste and safety concerns and maximizes economy, quality control, efficiency and safety during the construction process. This paper is an account of the design and construction of Flex House, a ZEH for central Florida’s hot humid climate.

SELF-ADAPTING FAÇADE SYSTEMS: EXPERIMENTATION REGARDING THE EXPLOITATION OF THERMAL DILATION

2020 ◽  
Vol 15 (4) ◽  
pp. 67-90
Author(s):  
Livio Petriccione ◽  
Fabio Fulchir ◽  
Francesco Chinellato
Keyword(s):  
Environmental Temperature ◽  
State Of The Art ◽  
The Self ◽  
External Energy ◽  
Building Envelopes ◽  
Orientation System ◽  
Thermal Dilation ◽  
Theoretical Results ◽  
Productive Development ◽  
Critical Aspects

ABSTRACT An original and innovative solar device orientation system is illustrated, together with the results of research and experimentation. The system proposed uses only the force generated by natural thermal dilation, without the help of motors, computerized devices or external energy sources, thus overcoming some critical aspects of the self-adaptive type of building envelopes used up until now. In the course of the research a mathematical model was developed to correlate the variation of the environmental temperature with the consequent expansion of the dilating elements of the system. The results of the tests carried out confirmed an excellent correspondence between the theoretical results and the experimentation. The state of the art of the research has all its theoretical aspects defined and some partial prototypes created. It is planned to build some complete prototypes with the realistic prospect of productive development.

scholarly journals Scalable Bi-Directional SMA-Based Rotational Actuator

Actuators ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 60 ◽  
Author(s):  
Rouven Britz ◽  
Paul Motzki ◽  
Stefan Seelecke
Keyword(s):  
Modular Design ◽  
High Weight ◽  
State Of The Art ◽  
Industrial Applications ◽  
Combustion Engines ◽  
Rotational Angle ◽  
Output Torque ◽  
Rotational Actuator ◽  
Rotatory Motion ◽  
Total Angle

In industrial applications, rotatory motions and torques are often needed. State-of-the-art actuators are based on either combustion engines, electro-motors, hydraulic, or pneumatic machines. The main disadvantages are the construction space, the high weight, and a large amount of needed peripheral devices. To overcome these limitations, compact and light-weight actuator systems can be built by using shape memory alloys (SMAs), which are known for their superior energy density. In this paper, the development of a scalable bi-directional rotational actuator based on SMA wires is presented. The scalability was based on a modular design, which allowed the actuator to be adapted to various application specifications by customizing the rotational angle and the output torque. On the mechanical side, each module enabled a small rotatory motion, which added up to the total angle of the actuator. The SMA wires were arranged in an agonist-antagonist configuration to provide active rotation in both directions. The presented prototype achieved a total rotation of 100°. The modularity of the mechanical concept is also reflected in the electronics, which is discussed in this paper as well. This consideration allows the electronics to be adapted to the mechanics with minimal changes. As a result, a prototype, including the presented mechanical and electronic design, is reported in this study.

scholarly journals Influence of airtightness of steel sandwich panel joints on heat losses

2020 ◽  
Vol 172 ◽  
pp. 05008
Author(s):  
Markus Kuhnhenne ◽  
Vitali Reger ◽  
Dominik Pyschny ◽  
Bernd Döring
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Building Envelope ◽  
The Finite Element Method ◽  
Transmission Losses ◽  
Building Envelopes ◽  
Metal Building ◽  
Effective Heat Transfer Coefficient ◽  
The Heat Transfer Coefficient

Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.

Mechanical and Processing Characterisation of Effective Behaviour of Wood-Plastic Composites by Analytical and Numerical Simulation

2008 ◽  
Vol 575-578 ◽  
pp. 959-971
Author(s):  
Aleš Hančič ◽  
Karl Kuzman ◽  
Franc Kosel ◽  
Andrej Glojek ◽  
António M. Cunha ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Processing Parameters ◽  
Design Guidelines ◽  
Natural Fibres ◽  
Past Century ◽  
Plastic Composite ◽  
Average Fibre ◽  
Mould Cavity ◽  
Mould Design ◽  
The Impact

The development of a new composite that is compounded of natural fibres and of a low price polymer, such as HDPE or PP, began in the last decade of the past century. While this is a rather new material no attempts have been made to analytically describe and simulate mechanical properties of this material. There is also a great lack of knowledge in describing fine tuned processing parameters. Therefore, in the first part of this article micromechanical approach based upon Generalised Method of Cells (GMC) is introduced to simulate properties of injection moulded wood-plastic composite compounded of polypropylene (PP) or polystyrene (PS) and of wood or cellulose short fibres. Materials have first been scanned with an optical and electron microscope to determine average fibre properties and their scatter. These values are then used to determine elastic and plastic response of the composite alongside with its tensile strength and maximum elongation, where the Tsai-Hill failure criterion has been used. The results of the simulation are then compared to experimental data in order to evaluate practical usage of this method. The second part of the article is focused on the simulation of injection moulding where test specimens were injected and the search for optimum injection parameters was performed. Various mechanical and rheological tests were performed and in addition practical industrial products were injected to observe the impact of various natural fibres on the filling of the mould cavity. Every experiment and process was then compared to the numerical simulation in order to evaluate applicability of numerical simulations under real conditions. On the basis of these experiments detailed mould design guidelines are given.

Sign in / Sign up

Export Citation Format

Share Document