scholarly journals Lean-burn CNG engine with ignition chamber: from the idea to a running engine

2019 ◽  
Vol 176 (1) ◽  
pp. 3-9 ◽  
Author(s):  
Michael WEIßNER ◽  
Frank BEGER ◽  
Martin SCHÜTTENHELM ◽  
Gunesh TALLU
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
State Of The Art ◽  
Combustion Engines ◽  
Lean Burn ◽  
Compressed Natural Gas ◽  
Emission Regulations ◽  
Cng Engine ◽  
Funded Project ◽  
The Eu

Current and further developing CO2- and emission regulations worldwide and the competition to full electric mobility deliver a chal-lenge for internal combustion engines in general. A state of the art solution is the use of natural gas mainly contending methane to reduce CO2 significantly and to offer lowest emission levels. The EU-funded project GasOn developed engine concepts to fully exploit the advantages of CNG. This article describes the development of an innovative, monovalent engine dedicated to Compressed Natural Gas (CNG) and characterised by the lean burn concept and the innovative pre-chamber combustion.

A phenomenological model for the description of unburned hydrocarbons emission in ultra-lean engines

2021 ◽  
pp. 146808742110050
Author(s):  
Enrica Malfi ◽  
Vincenzo De Bellis ◽  
Fabio Bozza ◽  
Alberto Cafari ◽  
Gennaro Caputo ◽  
...  
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Pollutant Emissions ◽  
Average Error ◽  
Combustion Engines ◽  
Nitric Oxides ◽  
Lean Burn ◽  
Fuel Charge ◽  
Unburned Hydrocarbons ◽  
Model Reliability

The adoption of lean-burn concepts for internal combustion engines working with a homogenous air/fuel charge is under development as a path to simultaneously improve thermal efficiency, fuel consumption, nitric oxides, and carbon monoxide emissions. This technology may lead to a relevant emission of unburned hydrocarbons (uHC) compared to a stoichiometric engine. The uHC sources are various and the relative importance varies according to fuel characteristics, engine operating point, and some geometrical details of the combustion chamber. This concern becomes even more relevant in the case of engines supplied with natural gas since the methane has a global warming potential much greater than the other major pollutant emissions. In this work, a simulation model describing the main mechanisms for uHC formation is proposed. The model describes uHC production from crevices and flame wall quenching, also considering the post-oxidation. The uHC model is implemented in commercial software (GT-Power) under the form of “user routine”. It is validated with reference to two large bore engines, whose bores are 31 and 46 cm (engines named accordingly W31 and W46). Both engines are fueled with natural gas and operated with lean mixtures (λ > 2), but with different ignition modalities (pre-chamber device or dual fuel mode). The engines under study are preliminarily schematized in the 1D simulation tool. The consistency of 1D engine schematizations is verified against the experimental data of BMEP, air flow rate, and turbocharger rotational speed over a load sweep. Then, the uHC model is validated against the engine-out measurements. The averaged uHC predictions highlight an average error of 7% and 10 % for W31 and W46 engines, respectively. The uHC model reliability is evidenced by the lack of need for a case-dependent adjustment of its tuning constants, also in presence of relevant variations of both engine load and ring pack design.

A quasi-one-dimensional model for an outwardly opening poppet-type direct gas injector for internal combustion engines

2019 ◽  
Vol 21 (8) ◽  
pp. 1493-1519
Author(s):  
Abhishek Y Deshmukh ◽  
Carsten Giefer ◽  
Dominik Goeb ◽  
Maziar Khosravi ◽  
David van Bebber ◽  
...  
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Flow Model ◽  
Direct Injection ◽  
Source Model ◽  
Gas Jet ◽  
Nozzle Flow ◽  
Combustion Engines ◽  
Compressed Natural Gas ◽  
One Dimensional

Direct injection of compressed natural gas in internal combustion engines is a promising technology to achieve high indicated thermal efficiency and, at the same time, reduce harmful exhaust gas emissions using relatively low-cost fuel. However, the design and analysis of direct injection–compressed natural gas systems are challenging due to small injector geometries and high-speed gas flows including shocks and discontinuities. The injector design typically involves either a multi-hole configuration with inwardly opening needle or an outwardly opening poppet-type valve with small geometries, which make accessing the near-nozzle-flow field difficult in experiments. Therefore, predictive simulations can be helpful in the design and development processes. Simulations of the gas injection process are, however, computationally very expensive, as gas passages of the order of micrometers combined with a high Mach number compressible gas flow result in very small simulation time steps of the order of nanoseconds, increasing the overall computational wall time. With substantial differences between in-nozzle and in-cylinder length and velocity scales, simultaneous simulation of both regions becomes computationally expensive. Therefore, in this work, a quasi-one-dimensional nozzle-flow model for an outwardly opening poppet-type injector is developed. The model is validated by comparison with high-fidelity large-eddy simulation results for different nozzle pressure ratios. The quasi-one-dimensional nozzle-flow model is dynamically coupled to a three-dimensional flow solver through source terms in the governing equations, named as dynamically coupled source model. The dynamically coupled source model is then applied to a temporal gas jet evolution case and a cold flow engine case. The results show that the dynamically coupled source model can reasonably predict the gas jet behavior in both cases. All simulations using the new model led to reductions of computational wall time by a factor of 5 or higher.

scholarly journals A Review on Liquefied Natural Gas as Fuels for Dual Fuel Engines: Opportunities, Challenges and Responses

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6127
Author(s):  
Md Arman Arefin ◽  
Md Nurun Nabi ◽  
Md Washim Akram ◽  
Mohammad Towhidul Islam ◽  
Md Wahid Chowdhury
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Ghg Emissions ◽  
Liquefied Natural Gas ◽  
Future Research ◽  
Dual Fuel ◽  
Combustion Engines ◽  
Emission Regulations ◽  
Dual Fuel Engines ◽  
Sustainable Fuels

Climate change and severe emission regulations in many countries demand fuel and engine researchers to explore sustainable fuels for internal combustion engines. Natural gas could be a source of sustainable fuels, which can be produced from renewable sources. This article presents a complete overview of the liquefied natural gas (LNG) as a potential fuel for diesel engines. An interesting finding from this review is that engine modification and proper utilization of LNG significantly improve system efficiency and reduce greenhouse gas (GHG) emissions, which is extremely helpful to sustainable development. Moreover, some major recent researches are also analyzed to find out drawbacks, advancement and future research potential of the technology. One of the major challenges of LNG is its higher flammability that causes different fatal hazards and when using in dual-fuel engine causes knock. Though researchers have been successful to find out some ways to overcome some challenges, further research is necessary to reduce the hazards and make the fuel more effective and environment-friendly when using as a fuel for a diesel engine.

scholarly journals Hydrogen enriched compressed natural gas (HCNG): A futuristic fuel for internal combustion engines

2011 ◽  
Vol 15 (4) ◽  
pp. 1145-1154 ◽  
Author(s):  
Kasianantham Nanthagopal ◽  
Rayapati Subbarao ◽  
Thangavelu Elango ◽  
Ponnusamy Baskar ◽  
Kandasamy Annamalai
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Combustion Engines ◽  
Compressed Natural Gas

Predicting the Performance and Emissions Characteristics of a Medium Duty Engine Retrofitted with Compressed Natural Gas System Using 1-Dimensional Software

2014 ◽  
Vol 699 ◽  
pp. 702-707
Author(s):  
Ahmad Jais Alimin ◽  
Muhammad Yusri Ismail ◽  
Shahrul Azmir Osman
Keyword(s):  
Natural Gas ◽  
Alternative Fuel ◽  
Simulation Software ◽  
Compressed Natural Gas ◽  
Operational Conditions ◽  
Performance And Emissions ◽  
Power Models ◽  
Cng Engine ◽  
Experimental Process ◽  
Dimensional Simulation

The rise of crude oil price and the implications of exhaust emissions to the environment from combustion application call for a new reliable alternative fuel. A potential alternative fuel for compression ignition (C.I.) engine is the compressed natural gas (CNG). For C.I. engines to operate using CNG, or to be converted as a retrofitted CNG engine, further modifications are required. Previous works reported loss in brake power (BP) and increase in hydrocarbon (HC) emission for C.I. engine retrofitted with CNG fuelling. Verification of performance characteristics for CNG retrofitted engine through experimental analysis requires high cost and is very time consuming. Thus, a 1-Dimensional simulation software, GT-Power, was introduced in this study to reduce the experimental process and setup. A 4-cylinder medium duty C.I. engine (DE) and CNG retrofitted engine (RE) GT-Power models were used in this simulation work over various operational conditions: low, medium and high load conditions. As compared with DE model, results from RE model showed that RE model achieved an average 4.9% improvement for brake specific fuel consumption (BSFC) and loss in BP by 37.3%. For nitrogen oxides (NOX) and carbon dioxides (CO2) RE model predicted reduction of 48.1% (engine mode 1-9) and 33.4% (all engine modes), respectively. Moreover, RE produced 72.4% more carbon monoxide (CO) and 90.3% more HC emission.

Sign in / Sign up

Export Citation Format

Share Document