scholarly journals Evaluation of mixture swirl in the cylinder chamber in a conceptual system with combustion surrounded by inactive gases

2018 ◽  
Vol 175 (4) ◽  
pp. 40-47
Author(s):  
Wojciech CIEŚLIK ◽  
Ireneusz PIELECHA
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Research Work ◽  
Combustion Process ◽  
Injection Pressure ◽  
Internal Combustion ◽  
Combustible Mixture ◽  
Conceptual System ◽  
Actual Distribution ◽  
Advanced Analysis

Internal combustion engines have seen a reduction of the dynamics of their efficiency growth in recent years. All kinds of new modifications and changes introduced in this field can only manage changes of engine efficiency at the level of a fraction of a percent. Considering the concept of unification of SI and CI internal combustion engine structures, one can expect to see their efficiency increase by the reduction of losses, whose causes and occurrence is commonly known. The improvement of the combustion system is mainly related to the reduction of thermal losses generated in this process. Therefore, the current issue is the advanced analysis of any possibilities of improving the combustion conditions and more fully understanding the processes that accompany them. The authors of the article see such a possibility in the conceptual control of the combustion process, which aims to obtain a combustible mixture surrounded by nonflammable gases. This way the flame contact with the cylinder walls is limited, which should in turn contribute to reducing the heat exchange with the walls. This research is a continuation of previous research work; current work focuses on determining the actual distribution of gases in the combustion chamber using the advanced shadow photography method. The article specifies the effect of nonflammable gas injection pressure increase on the area of the boundary layer formed between the non-flammable gases and cylinder walls.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

A comprehensive evaluation of water injection in the diesel engine

2021 ◽  
pp. 146808742110442
Author(s):  
Sebastian Welscher ◽  
Mohammad Hossein Moradi ◽  
Antonino Vacca ◽  
Peter Bloch ◽  
Michael Grill ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engines ◽  
Comprehensive Evaluation ◽  
Combustion Engine ◽  
Water Injection ◽  
Combustion Process ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Pressure Trace ◽  
High Level

Due to increasing climate awareness and the introduction of much stricter exhaust emission legislation the internal combustion engine technology faces major challenges. Although the development and state of technology of internal combustion engines generally reached a very high level over the last years those need to be improved even more. Combining water injection with a diesel engine, therefore, seems to be the next logical step in developing a highly efficient drive train for future mobility. To investigate these potentials, a comprehensive evaluation of water injection on the diesel engine was carried out. This study covers >560 individual operating points on the test bench. The tests were carried out on a single-cylinder derived from a Euro 6d four-cylinder passenger car with the port water injection. Furthermore, a detailed pressure trace analysis (PTA) was performed to evaluate various aspects regarding combustion, emission, etc. The results show no significant effects of water injection on the combustion process, but great potential for NOx reduction. It has been shown that with the use of water injection at water-to-fuel rates of 25%, 50%, and 100%, NOx reduction without deterioration of soot levels can be achieved in 62%, 40%, and 20% of the experiments, respectively. Furthermore, water injection in combination with EGR offers additional reduction in NOx emissions.

A Control Oriented SI and HCCI Hybrid Combustion Model for Internal Combustion Engines

2010 ◽  
Author(s):  
Xiaojian Yang ◽  
Guoming G. Zhu ◽  
Zongxuan Sun
Keyword(s):  
Steady State ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Fuel Efficiency ◽  
Combustion Process ◽  
Internal Combustion ◽  
Mean Value ◽  
Combustion Model ◽  
Zone Model ◽  
Transient Control

The combustion mode transition between SI (spark ignited) and HCCI (Homogeneously Charged Compression Ignition) of an IC (Internal Combustion) engine is challenge due to the thermo inertia of residue gas; and model-based control becomes a necessity. This paper presents a control oriented two-zone model to describe the hybrid combustion that starts with SI combustion and ends with HCCI combustion. The gas respiration dynamics were modeled using mean-value approach and the combustion process was modeled using crank resolved method. The developed model was validated in an HIL (Hardware-In-the-Loop) simulation environment for both steady-state and transient operations in SI, HCCI, and SI-HCCI hybrid combustion modes through the exhaust valve timing control (recompression). Furthermore, cooled external EGR (exhaust gas re-circulation) was used to suppress engine knock and enhance the fuel efficiency. The simulation results also illustrates that the transient control parameters of hybrid combustion is quite different from these in steady state operation, indicating the need of a control oriented SI-HCCI hybrid combustion model for transient combustion control.

scholarly journals Thermodynamic modeling of combustion process of the internal combustion engines – an overview

2019 ◽  
Vol 178 (3) ◽  
pp. 27-37 ◽  
Author(s):  
Denys STEPANENKO ◽  
Zbigniew KNEBA
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Air Pollutant ◽  
Combustion Engines ◽  
Engine Simulation ◽  
Toxic Emissions ◽  
The Moment

The mathematical description of combustion process in the internal combustion engines is a very difficult task, due to the variety of phenomena that occurring in the engine from the moment when the fuel-air mixture ignites up to the moment when intake and exhaust valves beginning open. Modeling of the combustion process plays an important role in the engine simulation, which allows to predict in-cylinder pressure during the combustion, engine performance and environmental impact with high accuracy. The toxic emissions, which appears as a result of fuels combustion, are one of the main environmental problem and as a result the air pollutant regulations are increasingly stringent, what makes the investigation of the combustion process to be a relevant task.

Emissions Control From IC Engines Using Advanced Combustion Chamber Design

1993 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating ◽  
Andrew A. Pouring
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Combustion Engine ◽  
Effective Means ◽  
Combustion Process ◽  
Cost Effective ◽  
Internal Combustion ◽  
Geometry Design ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion phenomena and pollutants emission characteristics have been obtained on an homogeneous-charged internal combustion engine having conventional flat piston and five other bowl-in-piston geometries. The code employed here uses the time marching procedure and solves the governing partial differential equations of multi-component chemically reactive flow by finite difference method. The transient solution is marched out in a sequence of time steps. The results show that the piston geometry affects the local flame properties which subsequently influences the pollutants emission level. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Piston Geometry Design Effects on Combustion and Emission Characteristics

1991 ◽  
Author(s):  
Ashwani K. Gupta ◽  
Lu Jiang ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Combustion Engine ◽  
Effective Means ◽  
Combustion Process ◽  
Internal Combustion ◽  
Emission Characteristics ◽  
Geometry Design ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion phenomena and pollutants emission characteristics have been obtained on an internal combustion engine having conventional flat piston and advanced piston geometries. The code employed the time marching procedure that solves the governing partial differential equations of multi-component chemically reactive fluid flow by finite difference method. The transient solution is marched out in a sequence of time steps. The results show that both the piston geometry and inlet flow conditions affects the local flame properties which subsequently alters the pollutants emission levels. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for energy conservation and environmental pollution control.

A Multidimensional Model to Simulate Direct Gaseous Fuel Injection in Internal Combustion Engines

2009 ◽  
Author(s):  
L. Andreassi ◽  
A. L. Facci ◽  
S. Ubertini
Keyword(s):  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Combustion Engine ◽  
Combustion Process ◽  
Three Dimensional ◽  
Air Entrainment ◽  
Internal Combustion ◽  
Numerical Results ◽  
Gaseous Fuel ◽  
Injection System

As a consequence of the endless price growing of oil, and oil derivate fuels, automotive industry is experiencing a concerning decreasing in sales. Accordingly, in order to meet customer needs, there is every day a greater interest in solutions for increasing engine efficiency. On the other hand the growing attention to environmental problems leads to increasingly restrictive regulations, such as European EURO 4 and EURO 5. Direct injection of gaseous fuel has emerged to be a high potential strategy to tackle both environmental and fuel economy requirements. However since the electronic gaseous injection technology is rather new for automotive applications, limited experience exists on the optimum configuration of the injection system and the combustion chamber. To facilitate the development of these applications computer models are being developed to simulate gaseous injection, air entrainment and the ensuing combustion. This paper introduces a new method for modelling the injection process of gaseous fuels in multi-dimensional simulations. The proposed model allows holding down grid requirements, thus making it compatible with the three-dimensional simulation of an internal combustion engine. The model is validated and calibrated by comparing numerical results with available experimental data. To highlight the potential applications, some numerical results of the three-dimensional combustion process in a gas engine are presented.

scholarly journals Diagnosing of misfire events in compression-ignition engines with the help of vibroacoustic methods in the aspect of OBD system application in diesel locomotives

2008 ◽  
Vol 132 (1) ◽  
pp. 3-16
Author(s):  
Jerzy MERKISZ ◽  
Marek WALIGÓRSKI
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
High Reliability ◽  
Direct Injection ◽  
Combustion Process ◽  
Vibration Signal ◽  
Internal Combustion ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Railway Traction

The article concerns the possibilities of use of the method being able to assess of the combustion process and its lack in internal combustion engines of railway traction vehicles, that bases on the use of vibration signal parameters. The paper includes the results of research conducted on the engine test bench with a single cylinder research and compression-ignition engine with direct injection, and tests for the engine of a diesel locomotive in the exploitation condition. Possibility of the vibration signal estimators application to the assessment of a combustion process lack in an internal combustion engine and a high reliability of combustion process diagnostics basing on the above method have been proved.

Study of Combustion Anomalies of H2-ICE With External Mixture Formation

2006 ◽  
Author(s):  
Stephen A. Ciatti ◽  
Thomas Wallner ◽  
Henry Ng ◽  
William F. Stockhausen ◽  
Brad Boyer
Keyword(s):  
Internal Combustion Engines ◽  
Large Scale ◽  
High Efficiency ◽  
Combustion Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Internal Combustion ◽  
Hydrogen Combustion ◽  
Mixture Formation

Although hydrogen is considered one of the most promising future energy carriers, there are several challenges to achieving a “hydrogen economy,” including finding a practical, efficient, cost-effective end-use device. Using hydrogen as a fuel for internal combustion engines is seen as a bridging technology toward a large-scale hydrogen infrastructure. To facilitate high-efficiency, high-power-density use of hydrogen with near-zero emissions in an internal combustion engine, detailed analysis of the hydrogen combustion process is necessary. This paper presents thermodynamic results regarding engine performance and emissions behavior during investigations performed on a single-cylinder research engine fueled by pressurized gaseous hydrogen. Avoiding combustion anomalies is one of the necessary steps to further improve the hydrogen engine power output at high-load operation while, at the same time, reducing fuel consumption and emissions during part-load operation. The overall target of the investigations is an improved combustion concept especially designed for hydrogen-engine-powered vehicles. Future activities include performing optical imaging of hydrogen combustion by using an endoscope. We will also investigate supercharged external mixture formation, as well as hydrogen direct-injection operation.

Sign in / Sign up

Export Citation Format

Share Document