scholarly journals Effect of Colombian coal rank and its feeding technology on substitute natural gas production by entrained gasification

2016 ◽  
Vol 25 (41) ◽  
pp. 41
Author(s):  
Juan Fernando Pérez-Bayer ◽  
Rolando Barrera-Zapata ◽  
Carlos Alberto Salazar-Jiménez
Keyword(s):  
Natural Gas ◽  
Volatile Matter ◽  
Gas Production ◽  
Process Efficiency ◽  
Coal Rank ◽  
Heating Value ◽  
Cold Gas Efficiency ◽  
Wobbe Index ◽  
Gas Efficiency ◽  
Feeding Technology

<p>The effect of coal rank (from sub-bituminous to semi-anthracite) and type of fuel feeding technology (slurry and dry) on the production of substitute natural gas (SNG) in entrained flow gasifiers is studied. Ten coals from important Colombian mines were selected. The process is modeled under thermochemical equilibrium using Aspen Plus, and its performance is evaluated in function of output parameters that include SNG heating value, Wobbe index, coal conversion efficiency, cold gas efficiency, process efficiency, global efficiency, and SNG production rate, among others. In descending order, the coal-to-SNG process improves energetically with the use of coals with: higher volatile-matter to fixed-carbon ratio, lower ash content, higher C+H/O ratio, and higher coal heating value. The overall energy efficiency of the slurry-feed technology (S-FT) to produce SNG by gasification is 17% higher than the dry-feed technology (D-FT), possibly as a consequence of the higher CH4 concentration in the syngas (around 7 vol. %) when the coal is fed as aqueous slurry. As the simulated SNG meets the natural gas (NG) quality standards in Colombia, the substitute gaseous fuel could be directly transported through pipelines. Therefore, the coal-to-SNG process is a technically feasible and unconventional alternative for NG production.</p>

scholarly journals Thermochemical Equilibrium Model of Synthetic Natural Gas Production from Coal Gasification Using Aspen Plus

2014 ◽  
Vol 2014 ◽  
pp. 1-18 ◽  
Author(s):  
Rolando Barrera ◽  
Carlos Salazar ◽  
Juan F. Pérez
Keyword(s):  
Natural Gas ◽  
Aspen Plus ◽  
Gas Production ◽  
Energy Output ◽  
Coal Slurry ◽  
Entrained Flow ◽  
Production Ratio ◽  
Thermochemical Equilibrium ◽  
Entrained Flow Gasifiers ◽  
Feeding Technology

The production of synthetic or substitute natural gas (SNG) from coal is a process of interest in Colombia where the reserves-to-production ratio (R/P) for natural gas is expected to be between 7 and 10 years, while the R/P for coal is forecasted to be around 90 years. In this work, the process to produce SNG by means of coal-entrained flow gasifiers is modeled under thermochemical equilibrium with the Gibbs free energy approach. The model was developed using a complete and comprehensive Aspen Plus model. Two typical technologies used in entrained flow gasifiers such as coal dry and coal slurry are modeled and simulated. Emphasis is put on interactions between the fuel feeding technology and selected energy output parameters of coal-SNG process, that is, energy efficiencies, power, and SNG quality. It was found that coal rank does not significantly affect energy indicators such as cold gas, process, and global efficiencies. However, feeding technology clearly has an effect on the process due to the gasifying agent. Simulations results are compared against available technical data with good accuracy. Thus, the proposed model is considered as a versatile and useful computational tool to study and optimize the coal to SNG process.

The Effect of Biomass Contents with Heavy Metal on Gasification Efficiency during Fluidized Bed Gasification Process

2012 ◽  
Vol 512-515 ◽  
pp. 575-578
Author(s):  
Hsien Chen ◽  
Chiou Liang Lin ◽  
Wun Yue Zeng ◽  
Zi Bin Xu
Keyword(s):  
H2 Production ◽  
Heating Value ◽  
Gasification Process ◽  
Cold Gas Efficiency ◽  
Zn Concentration ◽  
Lower Heating Value ◽  
Gasification Efficiency ◽  
Waste Gasification ◽  
Gas Efficiency ◽  
Cu And Zn

Catalysis was used to increase the H2 production, syngas heating value, enhanced carbon conversion efficiency and cold gas efficiency during gasification. Due to Cu and Zn were abundant in waste according to previous researches, this research discussed the effect of Cu and Zn on artificial waste gasification. The syngas composition and total lower heating value (LHV) were determined in this study. The results showed that the existence of Cu and Zn increased production of H2 and CO. However, the production of CH4 and CO2 decreased. At same time, total LHV was also increased. Additionally, the different Cu concentration affected gas composition and LHV, but the effect of Zn concentration was not significant.

Comparison of coal rank for enhanced biogenic natural gas production

2013 ◽  
Vol 115 ◽  
pp. 92-96 ◽  
Author(s):  
Paul H. Fallgren ◽  
Song Jin ◽  
Cuiping Zeng ◽  
Zhiyong Ren ◽  
Anhuai Lu ◽  
...  
Keyword(s):  
Natural Gas ◽  
Gas Production ◽  
Coal Rank ◽  
Natural Gas Production

scholarly journals Effect of Gasification Temperature on Synthesis Gas Production and Gasification Performance for Raw and Torrefied Palm Mesocarp Fibre

2020 ◽  
Vol 19 (2) ◽  
pp. 138
Author(s):  
Najwa Hayati Abdul Halim ◽  
Suriyati Saleh ◽  
Noor Asma Fazli Abdul Samad
Keyword(s):  
Synthesis Gas ◽  
Gas Production ◽  
Energy Applications ◽  
Gasification Process ◽  
Cold Gas Efficiency ◽  
Bubbling Fluidized Bed ◽  
Pre Treatment ◽  
Gas Efficiency ◽  
Solid Biomass ◽  
Gasification Temperature

Biomass gasification is widely used for converting solid biomass into synthesis gas for energy applications. Raw biomass is commonly used as feedstock for the gasification process but it usually contains high moisture content and low energy value which lowering synthesis gas production. Thus, torrefaction as a pre-treatment process is necessary in order to upgrade the properties of feedstock for producing more synthesis gas production and improving gasification performance. The objective of this work is to study the effect of gasification temperature on the synthesis gas production and gasification performance using raw and torrefied palm mesocarp fibre (PMF). The gasification process is conducted using bubbling fluidized bed using steam as gasifying agent. Based on experimental work, by increasing gasification temperature from 650 – 900 °C, the compositions of hydrogen and carbon monoxide gases were enhanced greatly while carbon dioxide and methane gases were decreased for both raw and torrefied PMF. In terms of gasification performance, synthesis gas yield for raw and torrefied PMF is increased from 0.91 to 1.23 Nm3/kg and 1.10 to 1.35 Nm3/kg respectively. Besides, lower heating value (LHV) of torrefied PMF is 0.04 MJ/Nm3 higher than raw PMF at 900 °C. The result showed that the percentage of cold gas efficiency (CGE) reached maximum of 67% for raw PMF while carbon conversion (CC) at 85.6% for torrefied PMF at a gasification temperature of 900 °C. The higher CC obtained by torrefied PMF is because of the increment of carbon content from 45.2% to 53.7% as a result of torrefaction. Gasification temperature of 800 °C showed the best performance of the PMF gasification since the maximum performances of LHV is achieved and started to decrease once the gasification temperature is operated beyond 800 °C.

scholarly journals Co-Gasification Characteristics of Coal and Biomass Using CO2 Reactant under Thermodynamic Equilibrium Modelling

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7384
Author(s):  
M. Shahabuddin ◽  
Sankar Bhattacharya
Keyword(s):  
Steady State ◽  
Thermodynamic Equilibrium ◽  
Operating Conditions ◽  
Heating Value ◽  
Entrained Flow ◽  
Cold Gas Efficiency ◽  
Lower Heating Value ◽  
Entrained Flow Gasifier ◽  
Gas Efficiency ◽  
Increasing Temperature

This study assessed the entrained flow co-gasification characteristics of coal and biomass using thermodynamic equilibrium modelling. The model was validated against entrained flow gasifier data published in the literature. The gasification performance was evaluated under different operating conditions, such as equivalence ratio, temperature, pressure and coal to biomass ratio. It is observed that the lower heating value (LHV) and cold gas efficiency (CGE) increase with increasing temperature until the process reaches a steady state. The effect of pressure on syngas composition is dominant only at non-steady state conditions (<1100 °C). The variation in syngas composition is minor up to the blending of 50% biomass (PB50). However, the PB50 shows a higher LHV and CGE than pure coal by 12%and 18%, respectively. Overall, biomass blending of up to 50% favours gasification performance with an LHV of 12 MJ/kg and a CGE of 78%.

scholarly journals Effect of Equivalence Ratio on the Rice Husk Gasification Performance Using Updraft Gasifier with Air Suction Mode

2020 ◽  
Vol 9 (1) ◽  
pp. 30-35
Author(s):  
Hendriyana Hendriyana
Keyword(s):  
Rice Husk ◽  
Equivalence Ratio ◽  
Volumetric Flow Rate ◽  
Unit Weight ◽  
Producer Gas ◽  
Heating Value ◽  
Cold Gas Efficiency ◽  
Gas Heating ◽  
Gas Efficiency ◽  
Cold Gas

Rice husk is the waste from agriculture industries that has high potential to produce heat and electricity through the gasification process. Air suction mode is new development for updraft rice husk gasification, where blower are placed at output of gasifier. The objective of this research is to examine these new configuration at several equivalence ratio. The equivalence ratio was varied at 32% and 49% to study temperature profile on gasifier, producer gas volumetric flow rate, composition of producer gas, producer gas heating value, cold gas efficiency and carbon conversion. The time needed to consume rice husk and reach an oxidation temperature of more than 700oC for equivalence ratio of 49% is shorter than 32%. Producer gas rate production per unit weight of rice husk increase from  2.03 Nm3/kg and 2.36 Nm3/kg for equivalence ratio of 32% and 49%, respectively. Composition producer gas for equivalence ratio of 32% is 17.67% CO, 15.39% CO2, 2.87% CH4, 10.62% H2 and 53.45% N2 and 49% is 19.46% CO, 5.94% CO2, 0.90% CH4, 3.46% H2 and 70.24% N2. Producer gas heating value for equivalence ratio 32% and 49% is 4.73 MJ/Nm3 and 3.27 MJ/Nm3, respectively. Cold gas efficiency of the gasifier at equivalence ratio 32% is 69% and at 49% is 55%.

scholarly journals Modelling and experimental analysis of a small-scale olive pomace gasifier for cogeneration applications: A techno-economic assessment

2019 ◽  
Vol 25 (4) ◽  
pp. 329-339
Author(s):  
João Cardoso ◽  
Valter Silva ◽  
Daniela Eusébio ◽  
Tiago Carvalho ◽  
Paulo Brito
Keyword(s):  
Economic Assessment ◽  
Gas Production ◽  
Waste To Energy ◽  
Small Scale ◽  
Producer Gas ◽  
Olive Pomace ◽  
Gasification Process ◽  
Cold Gas Efficiency ◽  
Gas Efficiency ◽  
Cold Gas

A 2-D numerical simulation approach was implemented to describe the gasification process of olive pomace in a bubbling fluidized bed reactor. The numerical model was validated under experimental gasification runs performed in a 250 kWth quasi-industrial biomass gasifier. The producer gas composition, H2/CO ratio, CH4/H2 ratio, cold gas efficiency and tar content were evaluated. The most suitable applications for the potential use of olive pomace as an energy source in Portugal were assessed based on the results. A techno-economic study and a Monte Carlo sensitivity analysis were performed to assess the feasibility and foresee the main investment risks in conducting olive pomace gasification in small facilities. Results indicated that olive pomace gasification is more suitable for domestic purposes. The low cold gas efficiency of the process (around 20%) turns the process more appropriate for producer gas production in small cogeneration facilities. Olive pomace gasification solutions showed viable economic performance in small cogeneration solutions for agriculture waste-to-energy recovery in olive oil agriculture cooperatives. However, the slender profitability may turn the project unattractive for most investors from a financial standpoint.

scholarly journals Influence of Oxidant Agent on Syngas Composition: Gasification of Hazelnut Shells through an Updraft Reactor

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 102 ◽  
Author(s):  
Francesco Gallucci ◽  
Raffaele Liberatore ◽  
Luca Sapegno ◽  
Edoardo Volponi ◽  
Paolo Venturini ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Energy Flow ◽  
Steam Gasification ◽  
Point Of View ◽  
Waste Biomass ◽  
Heating Value ◽  
Cold Gas Efficiency ◽  
Gas Efficiency ◽  
University Of Rome ◽  
Hazelnut Shells

This work aims to study the influence of an oxidant agent on syngas quality. A series of tests using air and steam as oxidant agents have been performed and the results compared with those of a pyrolysis test used as a reference. Tests were carried out at Sapienza University of Rome, using an updraft reactor. The reactor was fed with hazelnut shells, waste biomass commonly available in some parts of Italy. Temperature distribution, syngas composition and heating value, and producible energy were measured. Air and steam gasification tests produced about the same amount of syngas flow, but with a different quality. The energy flow in air gasification had the smallest measurement during the experiments. On the contrary, steam gasification produced a syngas flow with higher quality (13.1 MJ/Nm3), leading to the best values of energy flow (about 5.4 MJ/s vs. 3.3 MJ/s in the case of air gasification). From the cold gas efficiency point of view, steam gasification is still the best solution, even considering the effect of the enthalpy associated with the steam injected within the gasification reactor.

scholarly journals Co-Gasification of Treated Solid Recovered Fuel Residue by Using Minerals Bed and Biomass Waste Blends

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2081
Author(s):  
Md Tanvir Alam ◽  
Se-Won Park ◽  
Sang-Yeop Lee ◽  
Yean-Ouk Jeong ◽  
Anthony De Girolamo ◽  
...  
Keyword(s):  
Low Cost ◽  
Biomass Waste ◽  
Heating Value ◽  
Pine Sawdust ◽  
Syngas Production ◽  
Cold Gas Efficiency ◽  
Natural Minerals ◽  
Lower Heating Value ◽  
Gas Efficiency ◽  
Bed Material

Solid recovered fuel (SRF) residue, which is leftovers from the SRF manufacturing process, usually is discarded in landfill because of its low heating value and high ash and moisture content. However, it could be used as a fuel after mechanical and biological treatment. Gasification experiments were conducted on treated SRF residue (TSRFR) to assess the viability of syngas production. Efforts were also made to improve the gasification performance by adding low-cost natural minerals such as dolomite and lime as bed material, and by blending with biomass waste. In the case of additive mineral tests, dolomite showed better performance compared to lime, and in the case of biomass blends, a 25 wt% pine sawdust blend with TSRFR showed the best performance. Finally, as an appropriate condition, a combined experiment was conducted at an equivalence ratio (ER) of 0.2 using a 25 wt% pine sawdust blend with TSRFR as a feedstock and dolomite as the bed material. The highest dry gas yield (1.81 Nm3/kg), with the highest amount of syngas (56.72 vol%) and highest lower heating value (9.55 MJ/Nm3) was obtained in this condition. Furthermore, the highest cold gas efficiency (48.64%) and carbon conversion rate (98.87%), and the lowest residue yield (11.56%), tar (0.95 g/Nm3), and gas pollutants content was observed.

A parametric study on coal gasification for the production of syngas

2012 ◽  
Vol 66 (7) ◽  
Author(s):  
Afsin Gungor ◽  
Murat Ozbayoglu ◽  
Cosku Kasnakoglu ◽  
Atilla Biyikoglu ◽  
Bekir Uysal
Keyword(s):  
Parametric Study ◽  
Coal Gasification ◽  
Steam Gasification ◽  
Heating Value ◽  
Fuel Ratio ◽  
Gasification Process ◽  
Cold Gas Efficiency ◽  
Reactor Temperature ◽  
Gas Efficiency ◽  
Optimum Working

AbstractIn this parametric study, the effects of coal and oxidiser type, air-to-fuel ratio, steam-to-fuel ratio, reactor temperature, and pressure on H2 and CO amounts at the gasifier output, H2/CO, and higher heating value of the syngas produced have been calculated using a coal gasification model. Model simulations have been performed to identify the optimum values which are assumed to be 100 % for both cold gas efficiency and carbon conversion efficiency in the gasification process. From this study, it may be observed that the moisture content of the coal type is of crucial importance for the air gasification process; the O2 content of similar coals (taking into consideration the moisture and H2 content) is of significant importance for the air gasification process. When compared with air gasification, air-steam gasification becomes a more effective coal gasification method. The optimum working condition for air-steam gasification is to carry out the process at one atmosphere. High gasifier temperatures are not needed for the air-steam gasification of coal.

Sign in / Sign up

Export Citation Format

Share Document