Influence of Foliar Application of Nutrient on Growth, Yield, Economics, Soil Nutritional Status and Nutrient Uptake of Soybean

2020 ◽  
Author(s):  
S. A. Jaybhay ◽  
Philips Varghese ◽  
S. P. Taware
Keyword(s):  
Nutritional Status ◽  
Nutrient Uptake ◽  
Seed Yield ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Growth Yield ◽  
Cost Ratio ◽  
Water Spray ◽  
Initiation Stage

A field experiment was carried out during kharif season of 2016 and 2017 at an experimental farm of MACS Agharkar Research Institute, Pune, India to study the influence of foliar application of nutrient on growth, yield, economics, soil nutritional status and nutrient uptake of soybean crop. An experiment was laid out in randomized block design (RBD) comprising of three replications and nine treatments. Recommended dose of fertilizers (RDF) was applied as basal application to all treatments. Seven treatments consisted of different doses of nutrients as foliar application at pod initiation stage. Water spray at pod initiation stage and RDF alone were treated as control. The results revealed that, growth attributes, nodulation and its weight, morpho-physiological parameters, yield and its attributes, nutritional parameters and economics significantly differed by various foliar nutrition treatments except control and RDF + water spray. RDF + Urea 2% (3098 kg ha-1) gave significantly higher seed yield over control (2704 kg ha-1) and RDF + water spray (2686 kg ha-1) but was at par with RDF + DAP 2% (3050 kg ha-1), RDF + MOP 0.5% (2992 kg ha-1) and RDF + Molybdenum 0.5% (2955 kg ha-1). The increase in seed yield with foliar application of 2% Urea along with RDF was 14.57% over control and 15.34% over RDF + water spray. Higher net returns (Rs. 49,006/- ha-1) and benefit: cost ratio (2.23:1) was obtained in treatment RDF + Urea 2% followed by RDF + DAP 2% foliar spray. Availability of N, P and K was significantly higher with treatment RDF + Urea 2% foliar spray over control and RDF + water spray. N and P uptake by soybean plants was significantly higher in treatment RDF + 2% Urea over RDF + water spray and RDF alone (control).

scholarly journals Effect of potassium and zinc on growth, yield and economics of sweet potato (Ipomoea batatas L.) cv. CO-34

2017 ◽  
Vol 9 (1) ◽  
pp. 291-297
Author(s):  
Pravin Singh ◽  
Kavita Aravindakshan ◽  
I. B. Maurya ◽  
Jitendra Singh ◽  
Bhim Singh ◽  
...  
Keyword(s):  
Sweet Potato ◽  
Ipomoea Batatas ◽  
Tuber Yield ◽  
Foliar Application ◽  
Block Design ◽  
Maximum Yield ◽  
Growth Yield ◽  
Cost Ratio ◽  
Average Weight ◽  
Four Levels

A field experiment was conducted to study the effect of different levels of potassium and zinc on growth, yield and economics of sweet potato. The experiment was laid out on clay and loam soil by adopting randomized block design with factorial technique (FRBD). The sixteen treatments consisted of combination of four levels of po-tassium (0, 80, 100 and 120 kg/ha through muriate of potash and four levels of foliar zinc (control i.e. water spray, 10, 20 and 30ppm) through zinc sulphate. The individual application of potassium 120 kg K2O/ha significantly in-creased the number of tubers per plant (4.60), average weight of tuber (275.31 g), length of tuber (16.77 cm), diam-eter of tuber (5.69 cm), tuber yield per plot (9.71 kg), tuber yield per hectare (49.04 t) respectively as compared to control. With the foliar application of zinc (30 ppm) significant increase in number of tubers per plant (4.18), average weight of tuber (234.73 g), length of tuber (18.12 cm), diameter of tuber (5.16 cm), tuber yield per plot (8.33 kg) and tuber yield per hectare (42.05 t) was recordedas compared to control. The treatment combination (120 kg K2O+30ppm Zn) recorded the maximum yield parameters i.e. chlorophyll content (37.00 mg/100 g), average weight of tuber (302.17 g), length of tuber (19.82 cm), diameter of tuber (5.97 cm), maximum tuber yield per plot (11.02 kg), tuber yield per hectare (55.67 t) and benefit-cost ratio (B: C ratio) of 4.22:1.While, the treatment (120 kg K2O+30ppm Zn) had the maximum number of tuber (4.86), minimum number of tuber was recorded in control. From the experi-ment, it appeared that application of potassium and zinc can be used to improve yield and higher net monetary re-turns of sweet potato.

scholarly journals Effect of Various Sources of Zinc and Iron on Grain Yield, Nutrient Uptake and Quality Parameters of Finger Millet (Eleusine coracana L.)

2020 ◽  
pp. 46-55
Author(s):  
E. Ajay Kumar ◽  
K. Surekha ◽  
K. Bhanu Rekha ◽  
S. Harish Kumar Sharma
Keyword(s):  
Grain Yield ◽  
Nutrient Uptake ◽  
Grain Quality ◽  
Finger Millet ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Calcium Content ◽  
Quality Parameters ◽  
Growth Stages

A field experiment was conducted during Kharif 2018 at College Farm, College of Agriculture, PJTSAU to evaluate the effect of various sources of zinc and iron on grain yield, nutrient uptake and grain quality parameters of finger millet. The experiment was laid out in a randomized block design with 14 treatments and replicated thrice.The results revealed that application of different Zinc and iron sources at different rates significantly influenced the grain yield, nutrient (N, P and K) uptake and grain quality parameters (protein and calcium content) of finger millet. Highest grain yield (3653 kg ha-1), protein (11.25%) and calcium content (2.33%) in grain were obtained in the treatment receiving RDF + foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with treatment receiving RDF + foliar application of Fe-humate twice at 30 and 60 DAS (3612 kg ha-1, 10.90% and 2.0%) and the lowest grain yield (1995 kg ha-1), (6.25%) and calcium content (1.10%) were recorded with application of RDF alone. The nutrient uptake (N, P, K and Fe) at all the crop growth stages was significantly higher with the treatment receiving RDF (60:40:30 kg N,P2O5 and K2O kg ha-1) + foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with treatment receiving RDF+ foliar application of Fe-humate twice at 30 and 60 DAS. Highest iron uptake was recorded in treatment receiving RDF+foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with T8, T14 treatments.The highest nutrient uptake of Zinc was obtained in treatment receiving RDF + Zn Humate foliar spray @ 0.25% twice at 30 and 60 days after sowing which was on par with treatment receiving RDF + Zn Humate soil  application. Contrary to the grain yield, nutrient uptake, protein and calcium content there were no significant differences between treatments with respect to Zn, Fe and carbohydrate content in grain.

Response of potassium nitrate on yield and yield contributing characters of boro rice cv. BRRI dhan28

2020 ◽  
Vol 01 (01) ◽  
pp. 05-13
Author(s):  
M. Hasan ◽  
M. B. Akter ◽  
M. M. Karim ◽  
F. Yasmine ◽  
A. K. Hasan
Keyword(s):  
Grain Yield ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Potassium Nitrate ◽  
Growth And Yield ◽  
Growth Stages ◽  
Yield Production ◽  
Initiation Stage ◽  
Boro Rice

The experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, to explore the growth and yield performance of boro rice cv. BRRI dhan28 is influenced by foliar spray of potassium nitrate (KNO3) at four rice growth stages. The experiment consisted of four doses of KNO3 viz. 0 (Control), 0.25, 0.50 and 1.00 kg ha−1 and applied at four growth stages of rice development viz. at panicle initiation, at ear emergence, at anthesis period and at dough stage. This experiment was carried out in Randomized Complete Block Design (RCBD) with three replications with 10 m2 (4.0 m × 2.5 m) unit plot size and spacing between blocks and unit plots was 1 m and 0.5 m, respectively. Results revealed that foliar application of potassium nitrate at four growth stages significantly affected yield and yield contributing characters of BRRI dhan28. But most of the yield contributing characters did not differ significantly due to the interaction between potassium nitrate and stage of foliar spray. However, the foliar application of KNO3 @ 0.25 kg ha−1 showed the highest yield production (5.86 kg ha−1) while the lowest yield (4.85 kg ha−1) was found in control. Furthermore, better yield performances were recorded when the KNO3 was applied at panicle initiation stage rather than the other four growth stages. The total number of tillers, 1000–grain weight and grain yield, was higher with foliar spraying of a 0.25 kg ha−1 KNO3 at panicle initiation stage. From this experiment, it may be concluded that foliar application of KNO3 affected the yield performances of BRRI dhan28 and 0.25 kg ha−1 KNO3 produced the highest grain yield when applied at panicle initiation stage of boro rice.

scholarly journals Different Rates of Chicken Manure and NPK 15-15-15 Enhanced Performance of Sunflower (Helianthus annuus L.) on Ferruginous Soil

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
V. I. Abumere ◽  
O. A. Dada ◽  
A. G. Adebayo ◽  
F. R. Kutu ◽  
A. O. Togun
Keyword(s):  
Nutrient Uptake ◽  
Seed Yield ◽  
Dry Matter ◽  
Field Experiments ◽  
Block Design ◽  
Oil Quality ◽  
Chemical Properties ◽  
Growth Yield ◽  
Chicken Manure ◽  
Npk Fertilizers

Utilization of adequate fertilizer rate enhances soil physical and chemical properties, minimizes soil nutrient imbalance, and promotes better crop growth and development. The study investigated the influence of varying rates of chicken manure and NPK fertilizers as it affected growth, nutrient uptake, seed yield, and oil yield of sunflower on nutrient-limiting soil. Field experiments were carried out during 2014 and 2015 planting seasons for both main and residual studies. There were eight treatments comprising four rates of chicken manure (5, 10, 15, and 20 t·ha−1), three rates of NPK (30, 60, and 90 kg·N·ha−1), and control. The experiment was laid out in a randomized complete block design with three replicates. Growth, yield, dry matter and proximate, nutrient uptake concentration, and oil content were determined following standard procedures. Data were analyzed using ANOVA, and means were compared with the Duncan multiple range test (DMRT) at p≤0.05. Performance of sunflower was superior on the field fertilized with 10 t·ha−1 chicken manure which was comparable to 90 kg·N·ha−1 NPK fertilizer. Sunflower seed yield and oil quality were superior in plots supplied with 10 t·ha−1 chicken manure which was comparable to 60 kg·N·ha−1 NPK. Growth, yield, dry matter, and proximate content were least in the unfertilized plots.

scholarly journals Yield and Nutrient Uptake of Pigeonpea [Cajanus cajan (L.)] as Influenced by Sowing Window, Nutrient Dose and Foliar Sprays

2020 ◽  
Author(s):  
C. Nagamani ◽  
V. Sumathi ◽  
G. Prabhakara Reddy
Keyword(s):  
Nutrient Uptake ◽  
Seed Yield ◽  
Foliar Application ◽  
Sandy Loam ◽  
Foliar Spray ◽  
Nutrient Content ◽  
Available Phosphorus ◽  
Available Nitrogen ◽  
Foliar Sprays ◽  
Stalk Yield

A field experiment was conducted during the rabi seasons of 2012-13 and 2013-14 to study the influence of sowing window, nutrient dose and foliar spray on yield and nutrient uptake of pigeonpea on sandy loam soil which was low in available nitrogen, medium in available phosphorus and available potassium. The experiment was conducted in a split-split plot design, consisting of three sowing windows in main plots, three nutrient doses in sub-plots and two foliar sprays in sub-sub plots. Crop sown during II FN of September produced significantly higher seed and stalk yield, nutrient content and uptake. Application of 30-60-20 kg N, P2O5 and K2O ha-1 improved seed yield, stalk yield, nutrient content and uptake of redgram. Higher seed yield, stalk yield and nutrient uptake by the crop was recorded with foliar application of NAA (25 ppm) and DAP (2 per cent) applied at 60 and 80 DAS. Interaction between sowing window and nutrient doses, sowing window and foliar sprays were significant in influencing yield of pigeonpea.

scholarly journals Effect of NPK Water-soluble Fertilizer on Growth, Yield and Nutrient Uptake of Finger Millet

2020 ◽  
Author(s):  
N. Senthilkumar ◽  
G. Gokul
Keyword(s):  
Humic Acid ◽  
Nutrient Uptake ◽  
Finger Millet ◽  
Foliar Application ◽  
Sandy Loam ◽  
Foliar Spray ◽  
Growth Yield ◽  
Water Soluble ◽  
Yield Attributes ◽  
Soluble Fertilizer

Background: The availability of macro and micronutrients added to the soil are affected by soil environmental factors leading to various losses. When a similar amount of fertilizer is applied through foliar application, its use efficiency is increased many folds. In the sandy loam soil, foliar applied fertilizers are up to 20 times more effective as compared to soil applied fertilizers. Water soluble fertilizer of 19:19:19 grade N: P: K is totally water soluble and present in crystalline powder form. It can be applied to the crop by fertigation or through foliar spraying. Instant uptake of nutrients by the plants resulting in significant and quick improvement in crop growth. Humic acid when applied to field converted into readily available humic substances which directly or indirectly effect the plant growth. Foliar application of nutrients along with soil application of nutrients increase the yield and to improve the quality of cereal crops .Keeping the aforesaid facts in consideration, the present investigation was carried out to study effect of NPK water soluble fertilizer on growth, yield and yield attributes and nutrient uptake of ragi. Methods: The present investigation was carried out during January – May 2018 at farmers field, kamarajapuram village, Katpadi Taluk, Vellore district, Tamil Nadu, India. The experiments were laid out in RBD (Randomized Block Design), Ragi [Elusine coracana (L.) Gaertn], CO-14 variety were taken into study. The experimental soil was sandy loam, 10 treatments with replicated thrice. The soil and plant sample was collected periodically proceed with standard analytical and statistical method followed. Result: Our investigations the soil and foliar feeding of nutrients along with water soluble fertilizer and humic acid combined treatment T10 (Soil application of 50% RDN + foliar spray of 50% RDN and 100% P and K through water soluble fertilizer [on 20 and 40 DAT] + foliar spray of humic acid 0.1% [on 20 and 40 DAT]) was significantly superior in performance with respect to growth, yield attributes, quality and nutrient uptake by ragi. It can be recommended to farmers to achieve more benefit from finger millet.

scholarly journals Responses of different quality parameters of Chia to arbuscular mycorrhiza and plant growth regulator

2021 ◽  
Vol 35 (2) ◽  
Author(s):  
Hossam Ahmed Ashour ◽  
Sanaa E.A. Esmail ◽  
Asmaa El- Attar
Keyword(s):  
Plant Growth ◽  
Arbuscular Mycorrhiza ◽  
Seed Yield ◽  
Foliar Application ◽  
Tap Water ◽  
Foliar Spray ◽  
Growth Yield ◽  
Naphthalene Acetic Acid ◽  
Yield Attributes ◽  
Nutritional Values

Field experiment was conducted to evaluate the influence of arbuscular mycorrhiza fungi (AMF) and foliar spray of plant growth regulators (PGRs) and their interaction on vegetative growth, seed yield and yield attributes and some biochemical criteria of chia (Salvia hispanica L.), in a split plot design with three replications. Plants grown in absence or presence of AMF were sprayed every 2 weeks with benzyl adenine (BA), CPPU [N-(2-chloro-4-pyridinyl)-N’-phenylurea], common name forchlorfenuron, and Naphthalene acetic acid (NAA) at 50, 20 and 50 ppm respectively, while control plants were sprayed with tap water. The results revealed that, inoculation with AMF generally caused significant augmentation in all studied growth, yield and yield attributes, total chlorophylls and carbohydrates content in leaves, augmentation in nutritional values of seeds like carbohydrates %, macronutrient, micronutrients, proteins %, total flavonoids, oil % compared to non-inoculated plants. In absence or presence of AMF, application of PGRs generally caused significant increases in the studied parameters compared to control. The interaction between NAA and AMF was more effective since gave higher increases in the studied parameters. It can be concluded that, cultivation of chia plant in presence of mycorrhiza with foliar application of NAA at 50 ppm is recommended for enhancing growth, and nutritional values of seed yield.

scholarly journals Relative Change in Yields and Nutrient Uptake of Black Gram under Different Doses and Sources of Boron

2020 ◽  
pp. 17-22
Author(s):  
Rahul Kumar ◽  
Sweeti Kumari ◽  
Shweta Shambhabhi ◽  
Rashmi Priyadarshi ◽  
Shabana .
Keyword(s):  
Field Experiment ◽  
Nutrient Uptake ◽  
Seed Yield ◽  
Foliar Application ◽  
Block Design ◽  
Black Gram ◽  
Straw Yield ◽  
Randomized Block Design ◽  
Agricultural College ◽  
Relative Change

The present study “Relative changes in Boron fractions in black gram rhizosphere” was contemplated with two objectives: 1) To find out the suitable source, dose and method of boron for black gram and 2) To study the changes in relative boron fractionation under black gram rhizosphere. To achieve the present objectives a field experiment was conducted with Greek gram var. IPU2-43 in factorial randomized block design with three sources, four doses and two methods of application of boron replicated thrice at Bihar Agricultural College Farm of BAU, Sabour during the year 2018-19. Three sources were: S1: Borax, S2: Solubor and S3: Boric acid; Doses: D1: 0.5 kg ha-1, D2: 1.0 kg ha-1, D3: 1.5 kg ha-1, D4: 2.0 kg ha-1and methods: Soil and foliar application. Based on the findings of field experiment it can be concluded that the application of 1.5 kg B ha-1 (D3) registered maximum seed yield of (8.27 q ha-1), straw yield of (10.04 q ha-1), nutrient uptake by grain (12.64 g ha-1) and nutrient uptake by straw (16.95 g ha-1) which was statistically at par with the application of 2.0 kg B ha-1 (D4) and was found to be statistically superior over rest of the doses. Among the sources, the maximum seed yield (7.96 q ha-1), straw yield (9.53 qha-1), nutrient uptake by grain (12.42 gha-1) and nutrient uptake by straw (16.36 gha-1)was found to be highest under the plots receiving 1.5 kg B ha-1 through foliar application of Solubor (S2) and the lowest grain yield (7.88 qha-1), straw yield (9.36 q ha-1),nutrient uptake by grain (11.85 gha-1) and nutrient uptake by straw (15.60 gha-1)was recorded from 0.5 kg B ha-1(D1) which was found statistical inferior over rest of the boron doses. Foliar application resulted in a better yield of straw as compared to soil application.

scholarly journals Response of Rainfed Castor to Soil and Foliar Application of Zinc and Iron Micronutrients

2021 ◽  
Vol 12 (3) ◽  
pp. 158-164
Author(s):  
A. V. Ramanjaneyulu ◽  
◽  
A. Madhavi ◽  
M. V. Nagesh Kumar ◽  
T. L. Neelima ◽  
...  
Keyword(s):  
Seed Yield ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Field Investigation ◽  
Soil Application ◽  
Net Returns ◽  
Randomized Block Design ◽  
Telangana State ◽  
Bean Crop

A field investigation was carried out to study the influence of zinc and iron micronutrients on the performance of rainfed castor, in Professor Jayashankar Telangana State Agricultural University, Telangana state, India for three consecutive years during kharif 2011-12, 2012-13 and 2013-14. There were nine treatments viz., Control (no micronutrient application); soil application of FeSO4 @ 15 kg ha-1; soil application of FeSO4 @ 25 kg ha-1; soil application of ZnSO4 @ 15 kg ha-1; soil application of ZnSO4 @ 25 kg ha-1; foliar application of 0.5% FeSO4 at 50 DAS; foliar application of 0.5% FeSO4 at 50 and 90 DAS; foliar application of 0.5% ZnSO4 at 50 DAS; foliar application of 0.5% ZnSO4 at 50 and 90 DAS and tested in randomized block design with three replications. The foliar application of ZnSO4 (0.5%) twice at 50 and 90 DAS resulted in significantly higher seed yield (1698 kg ha-1), higher gross returns (Rs. 54344 ha-1), net returns (Rs. 33501 ha-1) and B:C ratio (2.60) over rest of the treatments. The seed yield improvement was to the tune of 54% over no micronutrient application. The uptake of major and micronutrients was greater when the crop received two sprays of ZnSO4 as compared to one spray of ZnSO4, two sprays of FeSO4 and soil application of either of the micronutrients. The castor bean crop responded to Zn better than Fe by producing 10.2% to 12.2% higher seed yield. Foliar spray was found superior to soil application in case of both the micronutrients.

Effect of Foliar Application of Micronutrients on Growth, Yield and Economics of Tomato (Lycopersicon esculentum Mill.)

2017 ◽  
Vol 104 (4 - 6) ◽  
Author(s):  
Sathiyamurthy V A ◽  
◽  
Shanmugasundaram T ◽  
Rajasree V ◽  
Arumugam T
Keyword(s):  
Lycopersicon Esculentum ◽  
Tamil Nadu ◽  
Foliar Application ◽  
Block Design ◽  
Ferrous Sulphate ◽  
Growth Yield ◽  
Cost Ratio ◽  
Vegetable Crops ◽  
Commercial Formulation ◽  
Lycopersicon Esculentum Mill

A field experiment was conducted to find out the response of foliar application of micronutrients on growth, yield and economics of tomato (Lycopersicon esculentum Mill.) at collage orchard, Department of Vegetable Crops, HC & RI, Tamil Nadu Agricultural University, Coimbatore. The treatments consisted of boric acid @100 ppm, ZnSo4 @ 100 ppm, ammonium molybdate @ 50 ppm, copper sulphate @ 100 ppm, ferrous sulphate @ 100 ppm, manganese sulphate @ 100 ppm, mixture of all, mixture of all without B, mixture of all without Zn, mixture of all without Mo, mixture of all without Cu, mixture of all without Fe, mixture of all without Mn, commercial formulation (Multiplex) @ 4 ml/lit and control (without spray). The experiment was laid out in a randomized block design with three replications. All the micronutrients were sprayed individually and in combinations on tomato in three sprays at an interval of 10 days starting from 40 days after transplanting. The results revealed that spraying of mixture of all micronutrients (T7 ) 3 times at an interval of 10 days starting from 40 days after transplanting resulted in the highest plant height (95.7 cm), number of fruits per plant (46.4), fruit weight (61.9 g), fruit yield per plot (63.5 kg), yield/ha (564.1 q) and benefit cost ratio (3.04) followed by the spray of commercial formulation (Multiplex).

Sign in / Sign up

Export Citation Format

Share Document