scholarly journals Mechanochemical Activation and Reaction Capacity of SHS-Systems on the Base of Quartz

2011 ◽  
Vol 13 (3-4) ◽  
pp. 125 ◽  
Author(s):  
Z.A. Mansurov ◽  
N.N. Mofa

The influence of different characteristics of mechanochemical activation on changes of structure and energy characteristics of silicon dioxide (quartz) is considered in this work. It is shown that after treatment in mill in the presence of different modificators, the quartz samples are complex composite formation, composed of crystalline, amorphous and polymeric component, and also contain inclusions of iron and carbon. Polymerized surface layer provides the encapsulation of the energy state of activated particle. Particularities of the technological combustion systems with active and modified quartz are investigated. The using of modifying agents leads to increasing of maximum combustion temperature, increasing of combustion process time as well as the change of phase composition of synthesis products. It is shown that alteration the sizes of synthesized sample (products) we can change the heat dissipation conditions, kinetic of reaction development and temperature in combustion wave. “The process scale” of solid phase combustion at material synthesis appears in change of the phase composition of obtained materials.

2020 ◽  
Vol 75 (3) ◽  
pp. 131-137
Author(s):  
Yu. N. Vodyanitskii ◽  
N. A. Avetov ◽  
A. T. Savichev ◽  
S. Ya. Trofimov ◽  
E. A. Shishkonakova

2011 ◽  
Vol 109 (1) ◽  
pp. 63-67 ◽  
Author(s):  
A. P. Surzhikov ◽  
A. M. Pritulov ◽  
E. N. Lysenko ◽  
A. N. Sokolovskii ◽  
V. A. Vlasov ◽  
...  

2018 ◽  
Vol 284 ◽  
pp. 893-898
Author(s):  
Andrey Yu. Stolboushkin ◽  
A.I. Ivanov ◽  
O.A. Fomina

Studies on structure, phase composition and properties of ceramic wall materials with a glass-crystalline framework from dispersed silica-rich rocks are described. The results of chemical, mineralogical and granulometric compositions of tripolite and granulated foam-glass crystalline material (GFGCM) are presented. The dependence of physical and mechanical properties of cellular ceramic materials on GFGCM content in the composition in the amount from 5 to 75% is determined. Test samples of cellular ceramic materials with dimensions 250 × 120 × 65 mm, having a compressive strength 16.2-20.8 MPa, water absorption 7.1-7.9 % and an average density 0.99-1.32 g/m3 were produced at the factory. At the macroscale level the cellular structure of the ceramic material consists of closed pores with a vitrified inner surface pore, glass-crystalline outer shell of the pores and solid phase of the framework walls. It was established that after firing in the temperature range 850-900 °C the walls of the framework are represented by quartz, feldspar and hematite, a pronounced halo is indicating a significant amount of glass phase.


Fuel ◽  
1987 ◽  
Vol 66 (7) ◽  
pp. 890-896 ◽  
Author(s):  
Thomas L. Van Winkle ◽  
Wilbur A. Affens ◽  
Erna J. Beal ◽  
George W. Mushrush ◽  
Robert N. Hazlett ◽  
...  

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 785
Author(s):  
Zdzisław Adamczyk ◽  
Magdalena Cempa ◽  
Barbara Białecka

The aim of this study was to examine the physico-chemical and phase characteristics of ash obtained in the process of the combustion of Polish poultry manure in a laboratory reactor with a bubbling fluidized bed. Three experiments, differing in the grain size and morphology of the raw material, the method of its dosing and the type of fluidized bed, were carried out. The contents of the main chemical components and trace elements in the obtained ash samples were determined using WDXRF, and the phase composition was examined through the XRD method. The morphology and the chemical composition of grains in a given micro-area using the SEM/EDS method were also investigated. The highest concentration of phosphorus (from 28.07% wt. to 29.71% wt. as P2O5 equivalent), the highest proportion of amorphous substance (from 56.7% wt. to 59.0% wt.) and the lowest content of unburned organic substance (LOI from 6.42% to 9.16%) (i.e., the best process efficiency), was obtained for the experiment in which the starting bed was quartz sand and poultry manure was fed to the reactor in the form of pellets. It has been calculated that in this case, the amorphous phase contains more than half of the phosphorus. The method of carrying out the combustion process has a significant impact on the phase composition and, consequently, on the availability of phosphorus.


2012 ◽  
Vol 26 (26) ◽  
pp. 1250141 ◽  
Author(s):  
Y. B. HAN ◽  
J. SHA ◽  
L. N. SUN ◽  
Q. TANG ◽  
Q. LU ◽  
...  

Sm (Co or/and Zn) substituted nanocrystalline barium hexaferrites were synthesized by the sol–gel auto-combustion process, then X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) were used to characterize and discuss the phase composition and the magnetic properties of the as-prepared barium hexaferrites. All results showed that the phase composition and magnetic properties were closely related to the doping elements and x. Owing to hyperfine field, canting spin, magnetic dilution and impurity phases, the saturation magnetization (Ms) of all samples increased firstly, and then decreased. Considering the crystallization, the magnetocrystalline anisotropy and the ions occupancy, the doping elements and x critically affected the coercivity (Hc). Compared the magnetic properties of all the samples, it is concluded that Zn 2+ and Co 2+ influenced each other and Zn 2+ occupied 4f2 sites prior to Co 2+, which led to the increase of Ms and the decrease of Hc.


2012 ◽  
Vol 53 (3) ◽  
pp. 548-556 ◽  
Author(s):  
D. A. Yatsenko ◽  
V. P. Pakharukova ◽  
S. V. Tsybulya ◽  
A. A. Matvienko ◽  
A. A. Sidel’nikov

Author(s):  
T. A. Ismailov ◽  
A. R. Shakhmaeva ◽  
A. M. Ibragimova

Abstract. Aim. The aim of the study is to analyse the problem of heat dissipation in high-power transistors and develop devices for their thermal stabilisation when used in electronic equipment. Method. A method is proposed for testing power transistors using a device to to ensure thermal stabilisation in the stating volume by means of a two-position temperature controller along with a model for the use of these components in electronic devices. The proposed devices support high thermal stabilisation accuracy of power transistors in a radioelectronic device system allowing temperature to be maintained at a given level with high accuracy by means of a thermoelectric battery. Results. Device designs were developed for increasing the accuracy of thermal stabilisation of power transistors with high efficiency, low energy consumption and small size. Conclusion. Based on the results of experimental studies, optimal designs for devices for the thermostabilisation of radioelectronic device components that dissipate significant power during their operation are presented. The devices can be used to increase the accuracy of thermal stabilisation of the radioelectronic device element by means of a working substance whose melting point coincides with its thermal stabilisation temperature. The developed devices have the following functions: the thermoelectric battery sections of the thermoelectric battery will be sequentially disconnected depending on the electrical signals from the temperature sensors to which the solid phase of the working substance has moved. The battery of the thermoelectric module (TEM) removes excess heat from the heat-stabilising substance while maintaining the required temperature of the radioelectronic device element. Excess heat from the heat-generating junctions of the TEM battery is removed by the heat exchanger. During melting of the working substance, the temperature of the thin-walled metal container – and, accordingly, the temperature of the CEA element – can be maintained at a constant value equal to the melting temperature of the working substance. 


Author(s):  
Vladimir A. Terekhov ◽  
Evgeny I. Terukov ◽  
Yury K. Undalov ◽  
Konstantin A. Barkov ◽  
Igor E. Zanin ◽  
...  

Amorphous SiOx films with silicon nanoclusters are a new interesting material from the standpoint of the physics, technology, and possible practical applications, since such films can exhibit photoluminescence due to size quantization. Moreover, the optical properties of these structures can be controlled by varying the size and the content of silicon nanoclusters in the SiOx film, as well as by transforming nanoclusters into nanocrystals by means of high-temperature annealing. However, during the annealing of nonstoichiometric silicon oxide, significant changes can occur in the phase composition and the structure of the films. The results of investigations on the crystallization of silicon nanoclusters in a SiOx matrix have shownthat, even a very fast method of annealing using PPA leads to the formation of large silicon crystallites. This also causes the crystallization of at least a part of the oxide phase in the form of silicon hydroxide H6O7Si2. Moreover, in films with an initial content of pure silicon nanoclusters ≤ 50%, during annealing a part of the silicon is spent on the formation of oxide, and part of it is spent on the formation of silicon crystals. While in a film with an initial concentration of silicon nanoclusters ≥ 53%, on the contrary, upon annealing, there occurs a partial transition of silicon from the oxide phase to the growth ofSi crystals        Reference 1. Undalov Y. K., Terukov E. I., Silicon nanoclustersncl-Si in a hydrogenated amorphous silicon suboxidematrix a-SiOx:H (0 < x < 2). Semiconductors. 2015;49(7):867- 878. DOI: https://doi.org/10.1134/S10637826150702222. Kim K. H., Johnson E. V., Kazanskii A. G.,Khenkin M. V., Roca P. Unravelling a simple methodfor the low temperature synthesis of siliconnanocrystals and monolithic nanocrystalline thinfilms. Scientific Reports. 2017;7(1) DOI: https://doi.org/10.1038/srep405533. Undalov Y. K., Terukov E. I., Trapeznikova I. N.Formation of ncl-Si in the amorphous matrix a-SiOx-:H located near the anode and on the cathode, usinga time-modulated DC plasma with the (SiH4–Ar–O2)gas phase (Co2 = 21.5 mol%). Semiconductors.2019;53(11): 1514–1523. DOI: https://doi.org/10.1134/S10637826191102284. Terekhov V. A., Terukov E. I., Undalov Y. K.,Parinova E. V., Spirin D. E., Seredin P. V., Minakov D. A.,Domashevskaya E. P. Composition and optical propertiesof amorphous a-SiOx:H films with silicon nanoclusters.Semiconductors. 2016;50(2): 212–216. DOI:https://doi.org/10.1134/S10637826160202515. Terekhov V. A., Turishchev S. Y., Kashkarov V. M.,Domashevskaya E. P., Mikhailov A. N., Tetel’baum D. I.Silicon nanocrystals in SiO2 matrix obtained by ionimplantation under cyclic dose accumulation. PhysicaE: Low-dimensional Systems and Nanostructures.2007;38(1-2): 16–20. DOI: https://doi.org/10.1016/j.physe.2006.12.0306. Terekhov V. A., Turishchev S. Y., Pankov K. N.,Zanin I. E., Domashevskaya E. P., Tetelbaum D. I.,Mikhailov A. N., Belov A. I., Nikolichev D. E., Zubkov S. Y.XANES, USXES and XPS investigations of electronenergy and atomic structure peculiarities of the siliconsuboxide thin film surface layers containing Si nanocrystals.Surface and Interface Analysis. 2010;42(6-7):891–896. DOI: https://doi.org/10.1002/sia.33387. Terekhov V. A., Turishchev S. Y., Pankov K. N.,Zanin I. E., Domashevskaya E. P., Tetelbaum, MikhailovA. N., Belov A. I., Nikolichev D. E. Synchrotron investigationsof electronic and atomic-structure peculiaritiesfor silicon-oxide films’ surface layers containingsilicon nanocrystals. Journal of Surface Investigation.X-ray, Synchrotron and Neutron Techniques. 2011;5(5):958–967. DOI: https://doi.org/10.1134/S102745101110020X8. Sato K., Izumi T., Iwase M., Show Y., Morisaki H.,Yaguchi T., Kamino T. Nucleation and growth of nanocrystallinesilicon studied by TEM, XPS and ESR.Applied Surface Science. 2003;216 (1-4): 376–381. DOI:https://doi.org/10.1016/S0169-4332(03)00445-89. Ledoux G., Gong J., Huisken F., Guillois O., ReynaudC. Photoluminescence of size-separated siliconnanocrystals: Confirmation of quantum confinement.Applied Physics Letters. 2002;80(25): 4834–4836. DOI:https://doi.org/10.1063/1.148530210. Patrone L., Nelson D., Safarov V. I., Sentis M.,Marine W., Giorgio S. Photoluminescence of siliconnanoclusters with reduced size dispersion producedby laser ablation. Journal of Applied Physics. 2000;87(8):3829–3837. DOI: https://doi.org/10.1063/1.37242111. Takeoka S., Fujii M., Hayashi S. Size-dependentphotoluminescence from surface-oxidized Si nanocrystalsin a weak confinement regime. Physical ReviewB. 2000;62(24): 16820–16825. DOI: https://doi.org/10.1103/PhysRevB.62.1682012. Ievlev V. M. Activation of solid-phase processesby radiation of gas-discharge lamps, Russian ChemicalReviews. 2013;82(9): 815–834. DOI: https://doi.org/10.1070/rc2013v082n09abeh00435713. Zimkina T. M., Fomichev V. A. Ultrasoft X-Rayspectroscopy. Leningrad: Leningrad State UniversityPubl.; 1971. 132 p.14. Wiech G., Feldhütter H. O., Šimůnek A. Electronicstructure of amorphous SiOx:H alloy filmsstudied by X-ray emission spectroscopy: Si K, Si L, andO K emission bands. Physical Review B. 1993;47(12):6981–6989. DOI: https://doi.org/10.1103/Phys-RevB.47.698115. Domashevskaya E. P., Peshkov Y. A., TerekhovV. A., Yurakov Y. A., Barkov K. A., Phase compositionof the buried silicon interlayers in the amorph o u s m u l t i l a y e r n a n o s t r u c t u r e s[(Co45Fe45Zr10)/a-Si:H]41 and [(Co45Fe45Zr10)35(Al2O3)65/a-Si:H]41. Surface and Interface Analysis.2018;50(12-13): 1265–1270. DOI: https://doi.org/10.1002/sia.651516. Terekhov V. A., Kashkarov V. M., ManukovskiiE. Yu., Schukarev A. V., Domashevskaya E. P.Determination of the phase composition of surfacelayers of porous silicon by ultrasoft X-ray spectroscopyand X-ray photoelectron spectroscopy techniques.Journal of Electron Spectroscopy and Related Phenomena.2001;114–116: 895–900. DOI: https://doi.org/10.1016/S0368-2048(00)00393-517. JCPDS-International Centre for DiffractionData ICDD PDF-2, (n.d.) card No 01-077-2110.18. JCPDS-International Centre for DiffractionData ICDD PDF-2, (n.d.) card No 00-050-0438.


Sign in / Sign up

Export Citation Format

Share Document