Catalysts for Alkylbenzene and Alkylpyridine Ammoxidation

<p>An increase of effectivity of binary and ternary vanadium containing oxide catalysts can be achieved by a regulation of chemical and phase catalyst composition during their preparation. Activity and selectivity of V-Ti catalysts depend on the ratio of V₂O₅ to VO₂ in the succession of substitutional solid solutions VO₂- TiO₂, as well as on the crystal modification of TiO₂. It was investigated the influence of vanadium oxides over the rate of the polymorfous conversion from anatase to rutile and the kind of TiO₂ crystal modification over V₂O₅ reduction degree during the thermal treatment of V-Ti catalysts. The synthesized catalysts offered producing nicotinonitrile from 3-methylpyridine with 93-95% mol. yield. Modifying of V-Ti catalysts by SnO₂ increased their activity. The reason is V=O bond weakening under the influence of SnO₂. That was verified by increasing of V₂O₅ dissociation rate almost by an order in comparison with V-Ti catalysts. SnO₂ in the ternary catalysts exists as individual phase and acts as a donor of oxygen for the lower vanadium oxides. It provides the high stability of V-Ti-Sn catalysts and possibility of obtaining isonicotinonitrile with 95-97% mol. yield from 4-methylpyridine. The investigation of the mutual influence of starting components in the ternary V-Ti-Zr catalysts showed that ZrO₂ prevented the polymorphous transformation from anatase into rutile. In its turn, anatase stabilized baddeleyite, which has a higher catalytic activity than ruffite. Taking into account the mutual influence of the components, it was able to prepare the selective V-Ti-Zr catalyst. It offered obtaining nicotininitrile from 3-methylpyridine with 92-96% mol. yield. </p>