scholarly journals Optimization of Decomposition Process of Karatau Phosphorites

2012 ◽  
Vol 14 (2) ◽  
pp. 183
Author(s):  
B. Myrzakhmetova ◽  
U. Besterekov ◽  
I. Petropavlovsky ◽  
S. Ahnazarova ◽  
V. Kiselev ◽  
...  

Phosphorous-acid process of Karatau phosphorites’ decomposition has been studied. The impact of temperature, time and acid rate on decomposition process of phosphate raw material, the conditions ensuring maximum degree of phosphorite decomposition have been identified. Variance estimate of experiment results’ reproducibility has been carried out by mathematical statistics method; the coefficients of regression equations have been set. The significance of regression equation coefficients has been checked up by Student’s criterion, and the adequacy of regression equation to experiment has been checked up by Fisher's criterion. With the use of utopian point method the parameters of studied raw materials’ decomposition have been optimized.

2020 ◽  
Vol 2 (7) ◽  
pp. 91-99
Author(s):  
E. V. KOSTYRIN ◽  
◽  
M. S. SINODSKAYA ◽  

The article analyzes the impact of certain factors on the volume of investments in the environment. Regression equations describing the relationship between the volume of investment in the environment and each of the influencing factors are constructed, the coefficients of the Pearson pair correlation between the dependent variable and the influencing factors, as well as pairwise between the influencing factors, are calculated. The average approximation error for each regression equation is determined. A correlation matrix is constructed and a conclusion is made. The developed econometric model is implemented in the program of separate collection of municipal solid waste (MSW) in Moscow. The efficiency of the model of investment management in the environment is evaluated on the example of the growth of planned investments in the activities of companies specializing in the export and processing of solid waste.


2020 ◽  
Vol 12 (24) ◽  
pp. 10454
Author(s):  
Katarína Teplická ◽  
Martin Straka

This article summarizes the arguments within the scientific discussion on the issue of using mining machines and their life cycle. The main goal of the article is to investigate the impact of a combination of mobile and stationary mining machines and their optimal distribution in the mining process to increase the efficiency of mining and processing of raw materials. The following methods of research were focused on the use of technical indicators for the valuation efficiency of the mining process: a simulation method was used for the distribution of mining machines, comparison analysis was used for the real and past state of mining machines, and a decision tree was used as managerial instrument for optimal alternatives of mining machines. The research empirically confirms and theoretically proves that optimal distribution of mining machines and machine parks is very important for mining companies. The benefit of this research for the mining company was the new location of the machines and the combination of stationary production lines and mobile equipment. The optimal layout of the machines reduced the number of conveyor belts and improved the transfer of limestone processing to mobile devices, saving time, which was reflected in transport costs. The results can be useful for other mining companies seeking to create an optimal machine park.


Author(s):  
Oleksiy Andryushayev ◽  
Olena Ruban ◽  
Yuliia Maslii ◽  
Inna Rusak

The aim. To determine the intensified method of extraction of phenolic compounds from Acorus calamus leaves and optimal conditions for the process. Materials and methods. In order to develop the optimal intensified method of extraction samples were prepared in different conditions of raw materials-extractant ratio, temperature, time and multiplicity. As a raw materials spectrophotometrically pre-standardized Acorus calamus leaves were used. The extraction was carried out in a hermetically sealed ultrasonic extraction reactor PEX 1 (REUS, Contes, France). As the criteria of extraction efficiency were indicators of dry residue and total amount of flavonoids determined using methods described in State Pharmacopoeia of Ukraine. The amount of flavonoids was determined spectrophotometrically on a certified device Specord 200 (Analytik Jena, Germany). Results. According to our research results it was found that ultrasonic action and addition of surfactant significantly improves the efficiency of the extraction process. The optimal conditions for the process were determined. Experimentally proved that the rational raw material-extractant ratio is 1:15. Comparative study of the extraction process with different temperatures showed that the highest amount of extractives is achieved at temperature 70 °C and 45 min of duration. The optimal extraction multiplicity is 3. Conclusions. As a result of the study, the intensified extraction method for Acorus calamus leaves – re-maceration with ultrasound – was established. The conducted researches allowed to develop the method of extraction, expedient in the conditions of the modern pharmaceutical industry.


Author(s):  
Anar Kareeva ◽  
Uilesbek Besterekov ◽  
Perizat Abdurazova ◽  
Ulzhalgas Nazarbek ◽  
Irina Pochitalkina ◽  
...  

Abstract The article presents the results of studies of the process of obtaining NPK fertilizer from low-grade phosphate raw materials with P2O5 of about 18%. Phosphate raw materials were leached with a mixture of nitric-phosphoric acids with the addition of potassium carbonate, which serves as a source of potassium in the final product. The main parameters determined were the content of the main nutrients P2O5:N:K2O, temperature and time of the leaching process. According to the graphical method, the “apparent” activation energy of the heterogeneous process is found, which is equal to 3.8 kJ/mol indicates the intradiffusion nature of the process. Methods of chemical analysis, scanning electron microscopy and XRD analysis were used for a comprehensive study of raw materials and final products.


Author(s):  
Б.Т. Базарова ◽  
Б.Қ. Копбулсынова ◽  
Ж.А. Аймешева ◽  
B. Bazarova ◽  
B. Kopbulsynova ◽  
...  

Батыс Қазақстан облысындағы кәсіпорындардың эволюциясы экономикалық дамудың жалпы циклдік сипатына байланысты да, әр түрлі сыртқы және ішкі факторлардың осы салаға әсер етуінен, сондай-ақ даму процесінде сөзсіз ауытқулар салдарынан ауытқуларға ұшырайды. Батыс Қазақстан облысының аймақтық агроөнеркәсіптік кешенін тұрақты дамытудың басымдықтары талдау арқылы анықталуы керек. Зерттеудің мақсаты - Батыс Қазақстан облысының агроөнеркәсіптік кешенінің тиімді және тұрақты дамуын зерттеу болып табылады. Бұл тақырыпты зерттеу кезінде статистикалық-экономикалық әдіс, талдау және синтез қолданылды. Ауылшаруашылық кешенінің жеке аймақ ретінде тұрақты дамуы да, жалпы елдің де дамуы ауылшаруашылық кешенінің тұрақты қалыптасуынсыз мүмкін емес, себебі оның түпкі өнімі қайта өңдеу өнеркәсібі болып табылады, ал оның мақсаты - талаптарына сай халықты сапалы өніммен қамтамасыз ету. Талдау көрсеткендей, ауылшаруашылық өндірісінің қазіргі жағдайы, қолайсыз факторлардың әсерінің күшеюімен сипатталады, ең алдымен табиғи факторлардың өндірісінде, жалпы өсімдік шаруашылығы өнімінің жылдық айырмашылықтарын тудырады, және өз кезегінде мал шаруашылығындағы ауытқуларға әкеледі, сонымен қатар оның әсері өңдеуші салаларда сезіледі, ал бұл өнеркәсіптің шикізаты болып табылады. Зертеу барысында 2015 жылдан бастап Батыс Қазақстан облысының аумағында ауыл шаруашылығы өнімдері өндірісінің күрт төмендегені анықталды, бұл жалпы, сондай-ақ өсімдік шаруашылығы мен мал шаруашылығы салалары бойынша да өндіріс тұрақтылығының төмендеуіне әкелді, және ол бүгінгі күнге дейін жалғасуда. Агроөнеркәсіптік кешеннің шикізат саласындағы өндіріс тұрақтылығының төмендеуі қайта өңдеу өнеркәсібі өнімдерін өндіруде ауытқулардың артуына әкеліп соқтырды, бұның нәтижесінде халыққа азық-түлік өнімдерін ұсынуда тұрақсыздық пайда болды. Батыс Қазақстан облысының АӨК-ін оның салаларының өнімділігі мен кірістілігін арттыруға бағытталған одан әрі дамыту өндірісті жаңғыртуды және қайта жарақтандыруды, оның инфрақұрылымын дамытуды және салалық кластерлерді қалыптастыруды талап етеді. Кілт сөздер: агроөнеркәсіп кешені, тербеліс, аграрлық сектор, өндіріс, халық саны, агротехника, экономика, талдау, өнімдер, өсімдік шаруашылығы. The evolution of enterprise in the West Kazakhstan region is subject to fluctuations due to both the general cyclical nature of economic development and the impact of various external and internal factors on this industry, as also fluctuations unavoidable in the evolution process. The priorities for sustainable evolution of the regional agro-industrial complex of the West Kazakhstan region should be identified through analysis. The goal of the research is to study the effective and sustainable development of the agro-industrial complex of the West Kazakhstan region. Through studies this topic, the statistical-economic method, analysis and synthesis were used. Sustainable development of the agro-industrial complex of both a particular region and the country as a whole is impossible without the stable functioning of its core - agriculture, the final product of which is used by the processing industry, whose goal is to provide the population with high-quality products in volumes that meet their requirements. Current state of agricultural production, as the analysis shows, is characterized by an increase in the influence of unfavorable factors on production, first of all natural ones, which cause annual differences in the production of gross crop production, which, in turn, convey fluctuations to the livestock industry and, as a result, affects the processing industries. it is the raw material of the industry. In the course of the study, it was found that, since 2015, in the territory of the West Kazakhstan region, there has been a sharp decline in agricultural production, which led to a decrease in the stability of production in general, and in the fields of crop and livestock production, which continues to the present. A decrease in the sustainability of production in the raw materials sector of the agro-industrial complex entailed an increase in fluctuations in the production of products of the processing industry, which ultimately resulted in the emergence of an instability in the supply of food to the population. Further development of the agro-industrial complex of the West Kazakhstan region, aimed at increasing the productivity and profitability of its industries, requires the modernization and re-equipment of production, the development of its infrastructure and the formation of industry clusters.


2020 ◽  
Vol 8 ◽  
Author(s):  
Duygu Karabelli ◽  
Steffen Kiemel ◽  
Soumya Singh ◽  
Jan Koller ◽  
Simone Ehrenberger ◽  
...  

The growing number of Electric Vehicles poses a serious challenge at the end-of-life for battery manufacturers and recyclers. Manufacturers need access to strategic or critical materials for the production of a battery system. Recycling of end-of-life electric vehicle batteries may ensure a constant supply of critical materials, thereby closing the material cycle in the context of a circular economy. However, the resource-use per cell and thus its chemistry is constantly changing, due to supply disruption or sharply rising costs of certain raw materials along with higher performance expectations from electric vehicle-batteries. It is vital to further explore the nickel-rich cathodes, as they promise to overcome the resource and cost problems. With this study, we aim to analyze the expected development of dominant cell chemistries of Lithium-Ion Batteries until 2030, followed by an analysis of the raw materials availability. This is accomplished with the help of research studies and additional experts’ survey which defines the scenarios to estimate the battery chemistry evolution and the effect it has on a circular economy. In our results, we will discuss the annual demand for global e-mobility by 2030 and the impact of Nickel-Manganese-Cobalt based cathode chemistries on a sustainable economy. Estimations beyond 2030 are subject to high uncertainty due to the potential market penetration of innovative technologies that are currently under research (e.g. solid-state Lithium-Ion and/or sodium-based batteries).


Author(s):  
Kausar Sultan Shah ◽  
Safi Ur Rehman

The key factor behind raw mix design in the cement factory is the appropriate production planning, resulting in high-quality raw material. Quarry managers usually come up with uncertainty-related raw materials due to variations in chemical composition. These uncertainties required efficient planning in terms of useful insight into this problem. This research provides a detailed explanation of scenario analysis of raw materials used in cement manufacturing using Monte Carlo simulation (MCS) and indices. Scenario analysis is used to predict the possibility of best, worst and most likely cases of raw material’s quality. Whereas, Monte Carlo simulation is used to evaluate the inherent uncertainty associated with chemical composition values in order to analyze the impact of truly unpredictable scenarios. The predictive results help in decisions related to production planning, raw mix design optimization and increasing the probability of designing the best plan.


2018 ◽  
Vol 14 (1) ◽  
Author(s):  
Intan Purwatianingsih Sihadi ◽  
Sifrid S. Pangemanan ◽  
Hendrik Gamaliel

Constraints are activities that prevent companies from carrying out production activities. Along with the increasingly competitive world economy today, industrial companies are required to be more sensitive in anticipating constraints that occur both internally and externally. These constraints must be considered by the company because it can hamper the production process which has an impact on production costs as well as sales volumes which ultimately cause losses to the company. One tool that can identify constraints of a company is the Constraint Theory. This study aims to find out what constraints occur in the production process and the impact of these constraints on production costs. The method used in this study is descriptive. The results of this study are internal constraints are engine damage and external constraints are delays in the delivery of raw materials. The impact of these constraints on production costs is the loss of raw material costs and an increase in factory overhead costs.Keywords: Constraints, Production Cost, Theory of Constraint


Agro Ekonomi ◽  
2016 ◽  
Vol 10 (1) ◽  
pp. 34
Author(s):  
Dewa K.S Swastika ◽  
Nyak Ilham ◽  
Ikin Sadikin

The Indonesian Dairy Industry wa.s well developed until mid 1997, due to some government protective policies, such as credit far imported dam cattle. and domestic market security. (;orernment determined the Milk Ratio (the ratio between domestic fresh milk and imported milk) that should he satisfied/ by the multinational milk processors (IPS) to run their milk processing lactories. However, the domestic .fresh milk production was not sufficient to meet the raw material far their Jactories. Therefore, in 1996, about 67% of raw materials has w he imported, especially from Australia and New Zealand, At least there were m.o/actors resulting a high import of dairy product. First, the domestic dairy production capacity was limited: second the Indonesian dairy industry was considered as inefficient, so that the price of domesticfresh milk was claimed to be more expensive compared to imported milk. The economic crisis starting from mid 1997, resulting in a high price of imported dairy cattle and feed. On the other hand, this crisis also resulting in a significant increase in price of imported milk. Therefore, the demand for domestic fresh milk by IPS was significantly increased The observations in 6 milk cooperatives (in East and West Java) showed that since economic crisis, all fresh milk offered by all cooperatives to IPS was absorbed. Even IPS provided some incentives (higher price and bonus).* the farmers who have a better quality of milk. There was also price adjustment given by IPS from about Rp. 600 hr in 1996 97 to about Rp. 900 and then about Rp. 1100 ltr in 1998 99. However, the farmers was still complaining. because if they compare milk price to rice price, they recognize that before crisis I liter milk was equivalent to 0.6 kg rice, but after crisis 1 liter milk was equivalent to only 0.4 kg rice. The most important issue that should be anticipated is that "if exchange rate of Rupiah to US Dollar is increased, then imported milk will be cheaper, and IPS will tend to import milk rather than buying domestic fresh milk If this case is happening, it will be a nightmare to farmers who do dairy farm. Therefore, the development and transfer of the more efficient technology in dairy industry should be given a high priority.


2020 ◽  
Vol 2020 (3) ◽  
pp. 24-31
Author(s):  
Z Galimova ◽  
◽  
H Babakhanova ◽  
M Abdunazarov ◽  
I Ismoilov ◽  
...  

Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials for paper production, study the impact of processing method of the grinding process on paper forming properties. During grinding the mechanical processes of changes of fibers determine mainly structure of a paper sheet, and colloidal-physical processes - bind and ability of fibers to form strong, homogenous and smooth structure of paper. The structure of the sheet of paper facilitates excessive or "selective" ink absorption into the pores of the paper and thus predetermines the quality of reproduction during the printing process. Methods for determining the physical and mechanical properties of papers were used in this work, and changes in the surface structure of samples cast at various technological modes of the milling process were studied. The results of the study revealed that the addition of cellulose mass from the inner layer of mulberry twig bark helps to obtain a strong paper. The optical properties of the paper, which contains cotton and cellulose from the inner layer of mulberry branch bark, are explained by the whiteness of the added fibers themselves. The strength properties of the paper at a weight grinding degree of 300 CWR are explained by the bond between the split and strongly interwoven fibers of the cellulose fibers. It has been established that the addition of more than 30% cellulose from the inner layer of the mulberry branch bark to the paper pulp mass is undesirable, as this adversely affects the whiteness of the paper


Sign in / Sign up

Export Citation Format

Share Document