scholarly journals Study on Material of Polymer-based Electromagnetic Shielding Composites

2018 ◽  
Vol 1 (1) ◽  
pp. 28 ◽  
Author(s):  
Hanwen Zhang ◽  
Zhendong Qiu ◽  
Huiping Wang
Keyword(s):  
Electromagnetic Interference ◽  
Evaluation Method ◽  
Electromagnetic Shielding ◽  
Shielding Effect ◽  
Magnetic Shielding ◽  
Information Industry ◽  
New Type ◽  
Performance Evaluation Method ◽  
Electro Magnetic ◽  
Shielding Composites

With the extensive application of electromagnetic resources in the information industry, electromagnetic interference has caused many hazards. Polymer-based electromagnetic shielding composite material as a new type of material has good shielding effect on the electromagnetic wave. This paper mainly introduces the types of polymer-based electro-magnetic shielding composite materials and the performance evaluation method of shielding materials.

Integrating Efficient Microwave Absorbing and Shielding in a Multistage Composite Foam with Progressive Conductivity Modular Design

2021 ◽  
Author(s):  
Yadong Xu ◽  
Zhiqiang Lin ◽  
Yaqi Yang ◽  
Hong-Ji Duan ◽  
Guizhe zhao ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Modular Design ◽  
Electromagnetic Shielding ◽  
Emi Shielding ◽  
Composite Foam ◽  
Microwave Absorbing Properties ◽  
Microwave Absorbing ◽  
Shielding Composites

Ultra-efficient electromagnetic interference (EMI) shielding composites with excellent microwave absorbing properties are the most desirable solution for eliminating microwave pollution. However, integrating absorbing and electromagnetic shielding materials is a difficult...

Study to Wood Electromagnetic Shielding Composites Laminated with Aluminum Plates

2011 ◽  
Vol 280 ◽  
pp. 159-164 ◽  
Author(s):  
Ke Yang Lu ◽  
Feng Fu ◽  
Yue Jin Fu ◽  
Zhi Yong Cai
Keyword(s):  
Electromagnetic Interference ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Building Product ◽  
Static Modulus ◽  
Electrical Devices ◽  
Aluminum Plates ◽  
Static Modulus Of Elasticity ◽  
Electromagnetic Shielding Effectiveness ◽  
Shielding Composites

Radiations from different electrical devices cause electromagnetic interference which will influence the performance realization of other electromagnetic device and cause the health concerns. The aluminum plates were then used to develop wood electromagnetic shielding composites by laminating with the plywood. Their static modulus of elasticity and electromagnetic shielding effectiveness of the composites with different thickness and position of aluminum plates were evaluated. The results showed that the strength of composites were improved by laminating the aluminum plates on the surface. The electromagnetic shielding performance of the composites were increased by the design of the multilayer and sandwich shielding structure. Again, It was also found that the composites made by laminating two aluminum plates (1mm, in the middle or on the surface) had a better shielding effectiveness (60 dB to 92 dB, 60 dB to 106 dB, Ranged from 1 GHz to 10 GHz) and met the requirement for a commercial electromagnetic shielding building product.

scholarly journals Ultrathin Multilayer Textile Structure with Enhanced EMI Shielding and Air-Permeable Properties

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4176
Author(s):  
Shi Hu ◽  
Dan Wang ◽  
Aravin Prince Periyasamy ◽  
Dana Kremenakova ◽  
Jiri Militky ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Single Layer ◽  
Electromagnetic Shielding ◽  
Shielding Effect ◽  
Material Surface ◽  
Test Results ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
Electromagnetic Shielding Effectiveness

A textile material’s electromagnetic interference (EMI) shielding effectiveness mainly depends on the material’s electrical conductivity and porosity. Enhancing the conductivity of the material surface can effectively improve the electromagnetic shielding effectiveness. However, the use of highly conductive materials increases production cost, and limits the enhancement of electromagnetic shielding effectiveness. This work aims to improve the EMI shielding effectiveness (EMSE) by using an ultrathin multilayer structure and the air-permeable textile MEFTEX. MEFTEX is a copper-coated non-woven ultrathin fabric. The single-layer MEFTEX SE test results show that the higher its mass per unit area (MEFTEX 30), the better its SE property between 56.14 dB and 62.53 dB in the frequency band 30 MHz–1.5 GHz. Through comparative testing of three groups samples, a higher electromagnetic shielding effect is obtained via multilayer structures due to the increase in thickness and decrease of volume electrical resistivity. Compared to a single layer, the EMI shielding effectiveness of five layers of MEFTEX increases by 44.27–83.8%. Due to its ultrathin and porous structure, and considering the balance from porosity and SE, MEFTEX 10 with three to four layers can still maintain air permeability from 2942 L/m2/s–3658 L/m2/s.

Medical Building Materials of Structural Properties and Electromagnetic Interference Shielding in the Quartz Crystal Plane Coated Ni Based Thin Film

2014 ◽  
Vol 599-601 ◽  
pp. 67-76
Author(s):  
Fei Shuo Hung
Keyword(s):  
Thin Film ◽  
Electromagnetic Interference ◽  
High Frequency ◽  
Electromagnetic Waves ◽  
Building Materials ◽  
Electromagnetic Shielding ◽  
Shielding Effect ◽  
Coating Film ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding

Medical use quartz components for electromagnetic shielding materials research topics very rarely, therefore, intend to systematic development of coated quartz glass materials. The considerations for against electromagnetic waves (Electromagnetic Interference Shielding, EMI), one conductive coating film is required. The anti-high-frequency electromagnetic waves also need magnetic coating film. The thin film is translucent with a poor crystallinity, must be heat-treated to have good crystallization and conductivity, and therefore finds the feasible of Ni-based coating and interface effects also have the academic importance. This program is to deposit Ni-based thin film on different quartz planes (Ni/SiO2), and explores the effect of heat treatment on the structure. That contains crystalline characteristics (doping concentration: the Ni-base matrix doping Fe, 10at%~ 50at.%), optical properties and electrical conductivity. Finally, the electromagnetic shielding effect (EMI) of the coating structure is assessed. So, the application data for the characteristics of interface layer and anti-electromagnetic (EMI) properties are obtained. building materials extended to the health care system materials systems. The results show that Sn-40Al-xNi film increased the electromagnetic interference (EMI) shielding after annealed. For the Sn-40Al-10Ni films with higher Ni atomic concentration, the low frequency EMI shielding could be improved. For the sputtering films the annealed treatment not only had higher electric conductivity but also increased the high frequency EMI shielding.

A Novel Structure Design of Conductive and Magnetic Electromagnetic Shielding Composites

2010 ◽  
Vol 152-153 ◽  
pp. 950-953
Author(s):  
Zhao Ming Qu ◽  
Qing Guo Wang
Keyword(s):  
Optimization Method ◽  
Structure Design ◽  
Electromagnetic Shielding ◽  
Modeling Method ◽  
Special Requirement ◽  
Novel Structure ◽  
New Type ◽  
Shielding Composites

Regarding to the special requirement of electromagnetic shielding materials, the concept and connotation of conductive and magnetic electromagnetic shielding composites were presented and the requirement causes of this kind of electromagnetic shielding composites applied in military and civil areas were analyzed. A structure design of new-type electromagnetic shielding materials is presented and the feasibility of the design was analyzed by associating with modeling method and optimization method.

Polymeric textile-based electromagnetic interference shielding materials, their synthesis, mechanism and applications – A review

2021 ◽  
pp. 152808372110370
Author(s):  
Faiza Safdar ◽  
Munir Ashraf ◽  
Amjed Javid ◽  
Kashif Iqbal
Keyword(s):  
Electromagnetic Interference ◽  
Hybrid Composites ◽  
Electronic Devices ◽  
High Tech ◽  
Emi Shielding ◽  
Materials Synthesis ◽  
Synthesis Mechanism ◽  
High Frequencies ◽  
Textile Materials ◽  
Shielding Composites

The rapid proliferation of electronic devices and their operation at high frequencies has raised the contamination of artificial electromagnetic radiations in the atmosphere to an unprecedented level that is responsible for catastrophe for ecology and electronic devices. Therefore, the lightweight and flexible electromagnetic interference (EMI) shielding materials are of vital importance for controlling the pollution generated by such high-frequency EM radiations for protecting ecology and human health as well as the other nearby devices. In this regard, polymeric textile-based shielding composites have been proved to be the best due to their unique properties such as lightweight, excellent flexibility, low density, ease of processability and ease of handling. Moreover, such composites cover range of applications from everyday use to high-tech applications. Various polymeric textiles such as fibers, yarn, woven, nonwoven, knitted, as well as their hybrid composites have been extensively manipulated physically and/or chemically to act as shielding against such harmful radiations. This review encompasses from basic concept of EMI shielding for beginner to the latest research in polymeric-based textile materials synthesis for experts, covering detailed mechanisms with schematic illustration. The review also covers the gap of materials synthesis and their application on polymeric textiles which could be used for EMI shielding applications. Furthermore, recent research regarding rendering EMI shielding properties at various stages of polymeric textile development is provided for readers with critical analysis. Lastly, the applications along with environmental compliance have also been presented for better understanding.

scholarly journals Research of Fluorescent Properties of a New Type of Phosphor with Mn2+-Doped Ca2SiO4

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2788
Author(s):  
Xiaozhou Fan ◽  
Wenqi Zhang ◽  
Fangcheng Lü ◽  
Yueyi Sui ◽  
Jiaxue Wang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Green Emission ◽  
Response Speed ◽  
Sintered Sample ◽  
Solid State Reaction Method ◽  
Average Lifetime ◽  
Diffraction Spectrum ◽  
Fluorescent Properties ◽  
Fluorescent Material ◽  
New Type

Fluorescent optical fiber temperature sensors have attracted extensive attention due to their strong anti-electromagnetic interference ability, good high-voltage insulation performance, and fast response speed. The fluorescent material of the sensor probe directly determines the temperature measurement effect. In this paper, a new type of fluorescent material with a Mn2+-doped Ca2SiO4 phosphor (CSO:Mn2+) is synthesized via the solid-state reaction method at 1450 °C. The X-ray diffraction spectrum shows that the sintered sample has a pure phase structure, although the diffraction peaks show a slight shift when dopants are added. The temperature dependence of the fluorescence intensity and lifetime in the range from 290 to 450 K is explored with the help of a fluorescence spectrometer. Green emission bands peaking at 475 and 550 nm from Mn2+ are observed in the fluorescence spectra, and the intensity of emitted light decreases as the temperature rises. The average lifetime of CSO:Mn2+ is 17 ms, which is much higher than the commonly used fluorescent materials on the market. The fluorescence lifetime decreases with increasing temperature and shows a good linear relationship within a certain temperature range. The research results are of great significance to the development of a new generation of fluorescence sensors.

Sign in / Sign up

Export Citation Format

Share Document