EXPERIMENTAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE WITH DIFFERENT TWIST RATIO OF TWISTED TAPE INSERTS

2015 ◽  
Vol 33 (3) ◽  
pp. 158-162 ◽  
Author(s):  
K. Sivakumar ◽  
K. Rajan
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Experimental Analysis ◽  
Circular Tube ◽  
Twisted Tape ◽  
Transfer Enhancement ◽  
Twist Ratio

CFD simulation of heat transfer enhancement in circular tube with twisted tape insert by using nanofluids

2020 ◽  
Vol 21 ◽  
pp. 572-577 ◽  
Author(s):  
A. Natarajan ◽  
R. Venkatesh ◽  
S. Gobinath ◽  
L. Devakumar ◽  
K. Gopalakrishnan
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Cfd Simulation ◽  
Circular Tube ◽  
Twisted Tape ◽  
Transfer Enhancement

scholarly journals CFD Analysis for Heat Transfer Enhancement inside a Circular Tube with Half-Length Upstream and Half-Length Downstream Twisted Tape

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
R. J. Yadav ◽  
A. S. Padalkar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Circular Tube ◽  
Swirl Flow ◽  
Twisted Tape ◽  
Turbulent Regime ◽  
Cfd Analysis ◽  
Transfer Enhancement ◽  
Plain Tube ◽  
Half Length

CFD investigation was carried out to study the heat transfer enhancement characteristics of air flow inside a circular tube with a partially decaying and partly swirl flow. Four combinations of tube with twisted-tape inserts, the half-length upstream twisted-tape condition (HLUTT), the half-length downstream twisted-tape condition (HLDTT), the full-length twisted tape (FLTT), and the plain tube (PT) with three different twist parameters (, 0.27, and 0.38) have been investigated. 3D numerical simulation was performed for an analysis of heat transfer enhancement and fluid flow for turbulent regime. The results of CFD investigations of heat transfer and friction characteristics are presented for the FLTT, HLUTT, and the HLDTT in comparison with the PT case.

scholarly journals Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 207 ◽  
Author(s):  
Gan Liu ◽  
Chen Yang ◽  
Junhui Zhang ◽  
Huaizhi Zong ◽  
Bing Xu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Friction Factor ◽  
Dominant Role ◽  
Length Ratio ◽  
Twisted Tape ◽  
Transfer Enhancement ◽  
Constant Wall Temperature ◽  
Advantages And Disadvantages ◽  
Twist Ratio

A heat exchanger is a device that transfers unneeded heat from one region to another, and transferred heat may be fully reused, thus improving energy efficiency. To augment this positive process, many studies and investigations on automation technologies have been performed. Inserts are widely used in pipe flow for heat transfer enhancement, since they can break the boundary layer and promote the heat exchange. Segmented twisted tape, which is applicable in 3D printing, is a novel insert and has potential in heat transfer enhancement. To clarify its advantages and disadvantages, this research presents a numerical investigation of vortex flow and heat enhancement in pipes containing one segmented twisted element. Flow state and heat transfer behaviour are obtained by simulation under constant wall temperature with different Reynolds numbers, ranging from 10,000 to 35,000. The effects of geometric parameters, including twist ratio (P/D = 2.0, 3.3 and 4.6) and length ratio (L/P = 0.3, 0.5 and 0.7), on the Nusselt number (Nu) and friction factor (f) are investigated. Streamline and temperature distribution are presented. Meanwhile, local and overall heat transfer performance is compared with those of a smooth tube, and the overall performance is evaluated by performance evaluation factor (η). The results indicate that the twist ratio (P/D) plays a dominant role in heat transfer enhancement while the length ratio (L/P) also has considerable influence. It is shown that a segmented tape insert can increase the overall heat transfer rate by 23.5% and the friction factor by 235%, while local improvement along the tube can be 2.8 times more than the plain tube.

scholarly journals Augmentation of Heat Transfer in a Duct with Rotating Turbulator using Al2o3 Nanofluid

2019 ◽  
Vol 8 (3) ◽  
pp. 3059-3062
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Enhancement ◽  
Heat Transfer Rate ◽  
Heat Exchangers ◽  
Transfer Rate ◽  
Twisted Tape ◽  
Transfer Enhancement ◽  
Twist Ratio ◽  
Al2o3 Nanofluid

The heat transfer enhancement is one of the essential factors to be considered in the design of heat exchangers. The rate of heat transfer can be enhanced by inserting and modifying the geometric configuration of the turbulators in the tube of heat exchangers. In our present work we conducted the experiment to investigate the rate of heat transfer enhancement in a tubular in a heat exchanger by using rotating twisted tape turbulator of twist ratio 3.27 using water and Al2O3 nanofluid as a testing fluid at the flow rate of 1, 2, and 3 LPM. The range of Reynolds number used is 2000<Re<10000, the heat transfer rate calculated for each case of rotating TTT with the speed of 0 to 300 RPM with the step of 100 RPM. The obtained results are compared between water and Al2O3 nanofluid, with and without rotating TTT. From the comparisons, it was found that the TTT with U-cut and the use of Al2O3 nanofluid gives the better rise in the heat transfer rate of about 39.63%. The augmented rate of heat transfer is due to the more turbulence when the rotating TTT is used and replacing the water with nanofluid as the testing fluid which of high thermal properties.

scholarly journals Two-way fluid-structure interaction study of twisted tape insert in a circular tube having integral fins with nanofluid

2021 ◽  
Vol 3 (8(111)) ◽  
pp. 25-34
Author(s):  
Mustafa Abdulsalam Mustafa ◽  
Atheer Raheem Abdullah ◽  
Wajeeh Kamal Hasan ◽  
Laith J. Habeeb ◽  
Maadh Fawzi Nassar
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Heat Transfer Enhancement ◽  
Circular Tube ◽  
Fluid Structure Interaction ◽  
Twisted Tape ◽  
Transfer Enhancement ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Laminar And Turbulent Flow

This work deals with fluid-structure interaction (FSI), one of the emerging areas of numerical simulation and calculation. This research shows a numerical study investigating heat transfer enhancement and fluid-structure interaction in a circular finned tube by using alumina nanofluid as a working fluid with a typical twisted tape that has a twisting ratio of 1.85. The studied nanofluid volumes of fraction are φ=0, 3, 5 % under conditions of laminar and turbulent flow. The solution for such problems is based on the relations of continuum mechanics and is mostly done with numerical methods. FSI occurs when the flow of fluid influences the properties of a structure or vice versa. It is a computational challenge to deal with such problems due to complexity in defining the geometries, nature of the interaction between a fluid and solid, intricate physics of fluids and requirements of computational resources. CFD investigations were made based on the numerical finite volume techniques to solve the governing three-dimensional partial differential equations to get the influence of inserted twisted tape and concentration of nanofluid on heat transfer enhancement, friction loss, average Nusselt number, velocity profile, thermal performance factor characteristics, and two-way interaction in a circular tube at laminar and turbulent flow. The governing continuity, momentum and energy transfer equations are solved using Ansys Fluent and Transient Structural. The simulation results show that the deformations of two-way coupling fluctuate from side to side, with 0.004 mm, as maximum amplitude, located at the typical twisted tape center. Heat transfer dissipation improved by adding fins and as Reynolds numbers increase the heat transfer behavior increases.

Sign in / Sign up

Export Citation Format

Share Document