scholarly journals Influence of Sodium Maghnite Nanoclay on the Polyvinylidene Fluoride Crystal Transition in Composite Membranes and Its Effect on Bovine Serum Albumin Protein Extraction

2021 ◽  
Vol 45 (3) ◽  
pp. 191-200
Author(s):  
Mustapha Chabane ◽  
Chikh Melkaoui ◽  
Benamar Dahmani ◽  
Zoubida Boudjenane
Keyword(s):  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Polyvinylidene Fluoride ◽  
Protein Extraction ◽  
Composite Membranes ◽  
Fluoride Crystal ◽  
Crystal Transition ◽  
Bovine Serum Albumin Protein

scholarly journals Preparation, characterization and dyeing wastewater treatment of a new PVDF/PMMA five-bore UF membrane with β-cyclodextrin and additive combinations

2021 ◽  
Author(s):  
Xiaozheng Bian ◽  
Jianping Huang ◽  
Lin Qiu ◽  
Chunyan Ma ◽  
Danli Xi
Keyword(s):  
Wastewater Treatment ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Membrane Fouling ◽  
Bovine Serum ◽  
Polyvinylidene Fluoride ◽  
Hollow Fiber Membrane ◽  
Pure Water ◽  
Water Flux ◽  
Dyeing Wastewater

Abstract A new type of polyvinylidene fluoride (PVDF)/polymethyl methacrylate (PMMA) hollow fiber membrane (HFM) with five bores was prepared. The effects of Polyvinylpyrrolidone (PVP), β-cyclodextrine (β-CD), Polyethylene Glycol (PEG) and Polysorbate 80 (Tween 80) and their combinations on the PVDF/PMMA five-bore HFMs were investigated. The performance and fouling characteristics of five-bore HFMs for dyeing wastewater treatment were evaluated. Results indicated that adding 5wt.% PVP could increase the porosity and water flux of the membrane but decrease the bovine serum albumin (BSA) rejection rate. Adding 5wt.% β-CD significantly improved the tensile and rejection of the HFMs without showing effect on the increase of water flux. The characteristic of the HFMs with different additives combinations proved that the mixture of 5wt.% PVP and 1wt.% β-CD obtained the best membrane performance, with a pure water flux of 427.9 L/ m2·h, a contact angle of 25°, and a rejection to bovine serum albumin (BSA) of 89.7%. The CODcr and UV254 removal rates of dyeing wastewater treatment were 61.10% and 50.41%, respectively. No breakage or leakage points were found after 120d operation showing the reliable mechanical properties. We set the operating flux to 55 L/m2·h and cross flow rate to 10% which can effectively control membrane fouling.

scholarly journals Fabrication of a Novel Antifouling Polysulfone Membrane with in Situ Embedment of Mxene Nanosheets

2019 ◽  
Vol 16 (23) ◽  
pp. 4659 ◽  
Author(s):  
Zhen Shen ◽  
Wei Chen ◽  
Hang Xu ◽  
Wen Yang ◽  
Qing Kong ◽  
...  
Keyword(s):  
Contact Angle ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Water Contact Angle ◽  
Bovine Serum ◽  
Composite Membranes ◽  
Recovery Ratio ◽  
Water Contact ◽  
Polysulfone Membrane

Membrane fouling is still a critical issue for the application of ultrafiltration, which has been widely used in water treatment due to its efficiency and simplicity. In order to improve the antifouling property, a new 2D material MXene was used to fabricate composite ultrafiltration membrane with the approach of in situ embedment during the phase inversion process in this study. Scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), water contact angle, bovine serum albumin rejection and porosity measurements were utilized to characterize the prepared membranes. Due to the hydrophilicity of the MXene, the composite membranes obtained higher hydrophilicity, confirmed by the decreased water contact angle. All the modified membranes had a high bovine serum albumin rejection above 90% while that of the pristine polysulfone membrane was 77.48%. The flux recovery ratio and the reversible fouling ratio of the membranes were also improved along with the increasing content of the MXene. Furthermore, the highest flux recovery ratio could also reach 76.1%. These indicated the good antifouling properties of MXene composite membranes. The enhanced water permeability and protein rejection and excellent antifouling properties make MXene a promising material for antifouling membrane modification.

scholarly journals Grafting Thin Layered Graphene Oxide onto the Surface of Nonwoven/PVDF-PAA Composite Membrane for Efficient Dye and Macromolecule Separations

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 792
Author(s):  
Febri Baskoro ◽  
Selvaraj Rajesh Kumar ◽  
Shingjiang Jessie Lue
Keyword(s):  
Graphene Oxide ◽  
Folic Acid ◽  
Methyl Orange ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Composite Membrane ◽  
Polyacrylic Acid ◽  
Bovine Serum ◽  
Polyvinylidene Fluoride ◽  
Oxide Composite

This study investigates the permeance and rejection efficiencies of different dyes (Rhodamine B and methyl orange), folic acid and a protein (bovine serum albumin) using graphene oxide composite membrane. The ultrathin separation layer of graphene oxide (thickness of 380 nm) was successfully deposited onto porous polyvinylidene fluoride-polyacrylic acid intermediate layer on nonwoven support layer using vacuum filtration. The graphene oxide addition in the composite membrane caused an increased hydrophilicity and negative surface charge than those of the membrane without graphene oxide. In the filtration process using a graphene oxide composite membrane, the permeance values of pure water, dyes, folic acid and bovine serum albumin molecules were more severely decreased (by two orders of magnitude) than those of the nonwoven/polyvinylidene fluoride-polyacrylic acid composite membrane. However, the rejection efficiency of the graphene oxide composite was significantly improved in cationic Rhodamine B (from 9% to 80.3%) and anionic methyl orange (from 28.3% to 86.6%) feed solutions. The folic acid and bovine serum albumin were nearly completely rejected from solutions using either nonwoven/polyvinylidene fluoride-polyacrylic acid or nonwoven/polyvinylidene fluoride-polyacrylic acid/graphene oxide composite membrane, but the latter possessed anti-fouling property against the protein molecules. The separation mechanism in nonwoven/polyvinylidene fluoride-polyacrylic acid membrane includes the Donnan exclusion effect (for smaller-than-pore-size solutes) and sieving mechanism (for larger solutes). The sieving mechanism governs the filtration behavior in the nonwoven/polyvinylidene fluoride-polyacrylic acid/graphene oxide composite membrane.

scholarly journals Fabrication and Assessment of ZnO Modified Polyethersulfone Membranes for Fouling Reduction of Bovine Serum Albumin

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Tshepo Duncan Dipheko ◽  
Kgabo Philemon Matabola ◽  
Kate Kotlhao ◽  
Richard M. Moutloali ◽  
Michael Klink
Keyword(s):  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Zno Nanoparticles ◽  
Bovine Serum ◽  
Pure Water ◽  
Water Flux ◽  
Composite Membranes ◽  
Optimal Performance ◽  
Fouling Resistance ◽  
Pure Water Flux

ZnO/PES composite membranes were fabricated by phase inversion method using DMAc as a solvent. The structure of ZnO was investigated using TEM, SEM, XRD, and TGA. TEM images of ZnO nanoparticles were well-defined, small, and spherically shaped with agglomerated nanoparticles particles of 50 nm. The SEM and XRD results were an indication that ZnO nanoparticles were present in the prepared ZnO/PES composites membranes. Contact angle measurements were used to investigate surface structures of the composite membranes. The amount of ZnO nanoparticles on PES membranes was varied to obtain the optimal performance of the composite membranes in terms of pure water flux, flux recovery, and fouling resistance using the protein bovine serum albumin (BSA) as a model organic foulant. The results showed that addition of ZnO to PES membranes improved the hydrophilicity, permeation, and fouling resistance properties of the membranes. Pure water flux increased from a low of 250 L/m2h for the neat membrane to a high of 410 L/m2h for the composite membranes. A high flux recovery of 80–94% was obtained for the composite membranes. The optimal performance of the composite membranes was obtained at 1.5 wt% of ZnO.

Sign in / Sign up

Export Citation Format

Share Document