scholarly journals CONSTRUCCIÓN DE UNA VIVIENDA SOLAR EN BASE A LAS PROPIEDADES TERMOFISICAS Y EVALUACIÓN EXPERIMENTAL DE SU CONFORT TÉRMICO EN ILAVE

2014 ◽  
Vol 16 (01) ◽  
Author(s):  
ARTURO FLORES CONDORI
Keyword(s):  
Relative Humidity ◽  
Solar Energy ◽  
Thermal Comfort ◽  
Thermophysical Properties ◽  
Experimental Evaluation ◽  
Meteorological Data ◽  
Thermal Inertia ◽  
Living Condition ◽  
Simulation Software ◽  
Experimental Structure

<h4 class="text-primary">Resumen</h4><p style="text-align: justify;">El presente artículo consistió en la construcción de una vivienda solar pasivo a base de propiedades termofísicas (Conductividad térmica, calor específico, difusividad térmica y inercia térmica) y desarrollar una evaluación experimental del rendimiento térmico aportado por los elementos constructivos, en una comunidad rural Colloco - Ilave, provisto de adecuado aislamiento térmico en la envolvente (doble pared de adobe, en el cielo raso: paja­carrizo-yeso y en el piso: tierra apisonada-cama de piedra-plástico-paja y totora), ubicación, la orientación y un sistema de acumulación de energía adecuadamente diseñada a base a encapsulado de piedras andesitas porosas y de totora. La distribución de energía calorífica almacenada fue primordial al ambiente dormitorio que esto permite el aprovechamiento de la energía solar para lograr que la temperatura al interior de la vivienda sea más confortable. Se realizó el análisis del comportamiento térmico de la vivienda construida y la vivienda rural típica, para lo cual se tomaron los datos meteorológicos de la zona (temperatura, humedad relativa, velocidad del viento y radiación solar), también se registraron la temperatura y humedad relativa del aire en el ambiente interior y exterior de las viviendas desde 19 de junio al 02 de julio del 2013. Obteniéndose en la vivienda construida las temperaturas máximas y mínimas de 15.85ºC y 11.88ºC respectivamente. Según la evaluación de la vivienda construida se aprecia un incremento de temperatura mínimo de 6.26°C, respecto a la vivienda típica. Para validar estos resultados experimentales, se ha utilizado el programa de simulación térmica EnergyPlus para los datos meteorológicos de la zona (3 868 msnm), comprobándose por el método correlativo, el factor de correlación fue r=0.92575. Este incremento de la temperatura en el interior de la vivienda construida contribuye alcanzar un confort térmico, permitiendo una condición de vida saludable para el poblador rural.</p><p><strong>PALABRAS CLAVE: </strong>* confort térmico * energía solar * propiedades termofísica * simulación térmica</p><h4 class="text-primary">ABSTRACT</h4><p><strong>CONSTRUCTION OF A SOLAR DWELLING BASED ON THERMOPHYSICAL PROPERTIES AND EXPERIMENTAL EVALUATION OF THERMAL COMFORT - ILAVE, PUNO - PERU»</strong></p><p style="text-align: justify;">The present article consists in the construction of a passive solar house based on the study of thermophysical properties (thermal conductivity, specific heat, thermal diffusivity and thermal inertia). We developed an experimental evaluation of the thermal efficiency contributed by different constructive materials, In the rural community of Colloco - Ilave. Once adequate thermal insulation was provided in the enveloping surface (double wall construction of sun-dried adobe brick, a false ceiling with: straw, bamboo and plaster. In the floor: tamped soil, stone bed, plastic, straw and totora reed). Location and position of the solar home in coordination with an energy accumulation system adequately designed with an encapsulation of porous Andesitic stones and Totora reed. Distribution of the stored thermal energy was directed primarily to the main bedroom, this enabled adequate use of solar energy in order to achieve a comfortable temperature within the dwelling. We analyzed the thermal behavior of both this experimental structure and that of a common rural dwelling; taking the interior and exterior meteorological readings found in the two dwelling types. (temperature, relative humidity, wind velocity and solar radiation). Between June 19th and July 2nd, the temperature and relative humidity of the interior of the experimental structure measured a max. of 15.85ºC (60.53ºF) and 11.88ºC (53.384ºF) respectively. According to a general evaluation of the experimental structure, there was a temperature increment of 6.26°C (=¿?ºF) compared to the average temperature of a normal dwelling. In order to confirm these experimental results we used the thermic simulation software EnergyPlus, entering the meteorological data of the area (3,868 meters above sea level=12690.3 ft.) using the correlative method and a correlative factor of r=0.92575. This higher temperature inside of the experimental structure contributes to attaining a thermic comfort allowing for a healthy living condition for the rural inhabitant.</p><p><strong>KEY WORDS: </strong>* thermal comfort * solar energy * thermophysical properties * thermal simulation</p>

scholarly journals Influence of Urban Microclimate on Air-Conditioning Energy Needs and Indoor Thermal Comfort in Houses

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Feng-Chi Liao ◽  
Ming-Jen Cheng ◽  
Ruey-Lung Hwang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
City Planning ◽  
Residential Buildings ◽  
Meteorological Data ◽  
Simulation Software ◽  
Comfort Level ◽  
Urban Microclimate ◽  
Local Climate ◽  
Hourly Data

A long-term climate measurement was implemented in the third largest city of Taiwan, for the check of accuracy of morphing approach on generating the hourly data of urban local climate. Based on observed and morphed meteorological data, building energy simulation software EnergyPlus was used to simulate the cooling energy consumption of an air-conditioned typical flat and the thermal comfort level of a naturally ventilated typical flat. The simulated results were used to quantitatively discuss the effect of urban microclimate on the energy consumption as well as thermal comfort of residential buildings. The findings of this study can serve as a reference for city planning and energy management divisions to study urban sustainability strategies in the future.

scholarly journals Analysis of temperature, air humidity and wind conditions for the needs of outdoor thermal comfort

2018 ◽  
Vol 44 ◽  
pp. 00028 ◽  
Author(s):  
Ewelina Dec ◽  
Bożena Babiarz ◽  
Robert Sekret
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Thermal Comfort ◽  
Meteorological Data ◽  
Daily Basis ◽  
Outdoor Thermal Comfort ◽  
Maximum Daily Temperature ◽  
Hot Days ◽  
Average Relative Humidity ◽  
The Relationship

On the thermal comfort of a man staying outdoor during the summer affect mostly meteorological factors, physical activity and the type of clothing. The work analyzed external air parameters, such as: temperature, relative humidity and wind speed, occuring in years 1997‒2016. Meteorological data recorded at the RzeszÓw-Jasionka station allowed to determine, among others, the occurrence of maximum daily and hourly temperatures of outdoor, the daytime and hourly air relative humidity, the hourly wind speed, as well as the relationship between these parameters. In recent years, it has been observed the increase of the number of hot and very hot days which indicates a warming of the climate. The duration of series of days with maximum daily temperature above 30°C is also prolonged, which is not comfortable for a person staying outside. During summer, during hot and very hot days, the average relative humidity remained below 70%. The daily course of this factor was characterized by the opposite tendency with respect to temperature. The wind speed in the summer season varies from 0 to 6 m/s. On a daily basis, the increase in wind speed occurred in the afternoon hours which is consistent with the temperature characteristics. The occurrence of wind during the hottest hours causes a pleasant cooling of the organism.

scholarly journals Detrended Multiple Cross-Correlation Coefficient applied to solar radiation, air temperature and relative humidity

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Andrea de Almeida Brito ◽  
Heráclio Alves de Araújo ◽  
Gilney Figueira Zebende
Keyword(s):  
Relative Humidity ◽  
Solar Radiation ◽  
Solar Energy ◽  
Correlation Coefficient ◽  
Air Temperature ◽  
Cross Correlation ◽  
Global Solar Radiation ◽  
Meteorological Variables ◽  
Hourly Data ◽  
Cross Correlations

AbstractDue to the importance of generating energy sustainably, with the Sun being a large solar power plant for the Earth, we study the cross-correlations between the main meteorological variables (global solar radiation, air temperature, and relative air humidity) from a global cross-correlation perspective to efficiently capture solar energy. This is done initially between pairs of these variables, with the Detrended Cross-Correlation Coefficient, ρDCCA, and subsequently with the recently developed Multiple Detrended Cross-Correlation Coefficient, $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}$$DMCx2. We use the hourly data from three meteorological stations of the Brazilian Institute of Meteorology located in the state of Bahia (Brazil). Initially, with the original data, we set up a color map for each variable to show the time dynamics. After, ρDCCA was calculated, thus obtaining a positive value between the global solar radiation and air temperature, and a negative value between the global solar radiation and air relative humidity, for all time scales. Finally, for the first time, was applied $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}$$DMCx2 to analyze cross-correlations between three meteorological variables at the same time. On taking the global radiation as the dependent variable, and assuming that $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}={\bf{1}}$$DMCx2=1 (which varies from 0 to 1) is the ideal value for the capture of solar energy, our analysis finds some patterns (differences) involving these meteorological stations with a high intensity of annual solar radiation.

scholarly journals Techno-economic feasibility analysis of a 3-kW PV system installation in Nepal

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Ramhari Poudyal ◽  
Pavel Loskot ◽  
Ranjan Parajuli
Keyword(s):  
Net Present Value ◽  
Meteorological Data ◽  
Electric Energy ◽  
Simulation Software ◽  
Economic Feasibility ◽  
Performance Ratio ◽  
Energy Output ◽  
Solar Pv ◽  
Economic Returns ◽  
Pv System

AbstractThis study investigates the techno-economic feasibility of installing a 3-kilowatt-peak (kWp) photovoltaic (PV) system in Kathmandu, Nepal. The study also analyses the importance of scaling up the share of solar energy to contribute to the country's overall energy generation mix. The technical viability of the designed PV system is assessed using PVsyst and Meteonorm simulation software. The performance indicators adopted in our study are the electric energy output, performance ratio, and the economic returns including the levelised cost and the net present value of energy production. The key parameters used in simulations are site-specific meteorological data, solar irradiance, PV capacity factor, and the price of electricity. The achieved PV system efficiency and the performance ratio are 17% and 84%, respectively. The demand–supply gap has been estimated assuming the load profile of a typical household in Kathmandu under the enhanced use of electric appliances. Our results show that the 3-kWp PV system can generate 100% of electricity consumed by a typical residential household in Kathmandu. The calculated levelised cost of energy for the PV system considered is 0.06 $/kWh, and the corresponding rate of investment is 87%. The payback period is estimated to be 8.6 years. The installation of the designed solar PV system could save 10.33 tons of CO2 emission over its lifetime. Overall, the PV systems with 3 kWp capacity appear to be a viable solution to secure a sufficient amount of electricity for most households in Kathmandu city.

Influence of Non-Equilibrium Fluid Properties During Fogging on Intake Duct and Compressor Characteristics

2017 ◽  
Author(s):  
Christoph Günther ◽  
Franz Joos
Keyword(s):  
Relative Humidity ◽  
Gas Turbine ◽  
Thermophysical Properties ◽  
Ambient Air ◽  
Compressor Stage ◽  
Compression Process ◽  
Fluid Properties ◽  
Temperature And Pressure ◽  
Gas Turbine Compressor ◽  
Non Equilibrium

This study reports on numerically calculated thermophysical properties of air passing through a gas turbine compressor after passage through an intake duct affected by wet compression. Case of reference is unaffected ambient air (referenced to as dry scenario) passing through intake duct and compressor. Furthermore, ambient air cooled down by (overspray) fogging (referenced to as wet scenarios) was considered. Acceleration at the end of intake duct causing reduction of static temperature and pressure results in supersaturated fluid properties at inlet to gas turbine compressor. These supersaturated fluid properties are non-equilibrium with saturation level above relative humidity of φ = 1. Entrance of supersaturated fluid into gas turbine compressor can result in condensation within first compressor stage. At the same time delayed impact of evaporative cooling influences compression process.

scholarly journals Basic Diagnosis and Prediction of Persistent Contrail Occurrence Using High-Resolution Numerical Weather Analyses/Forecasts and Logistic Regression. Part II: Evaluation of Sample Models

2009 ◽  
Vol 48 (9) ◽  
pp. 1790-1802 ◽  
Author(s):  
David P. Duda ◽  
Patrick Minnis
Keyword(s):  
Relative Humidity ◽  
Wind Direction ◽  
Meteorological Data ◽  
Logistic Models ◽  
Satellite Observations ◽  
Lapse Rate ◽  
Prediction System ◽  
Advanced Regional Prediction System ◽  
Regional Prediction ◽  
Surface Models

Abstract A probabilistic forecast to accurately predict contrail formation over the conterminous United States (CONUS) is created by using meteorological data based on hourly meteorological analyses from the Advanced Regional Prediction System (ARPS) and the Rapid Update Cycle (RUC) combined with surface and satellite observations of contrails. Two groups of logistic models were created. The first group of models (SURFACE models) is based on surface-based contrail observations supplemented with satellite observations of contrail occurrence. The most common predictors selected for the SURFACE models tend to be related to temperature, relative humidity, and wind direction when the models are generated using RUC or ARPS analyses. The second group of models (OUTBREAK models) is derived from a selected subgroup of satellite-based observations of widespread persistent contrails. The most common predictors for the OUTBREAK models tend to be wind direction, atmospheric lapse rate, temperature, relative humidity, and the product of temperature and humidity.

Design Range of Indoor Relative Humidity in Radiant Cooling Environment

2011 ◽  
Vol 243-249 ◽  
pp. 4905-4908
Author(s):  
Xue Min Sui ◽  
Xu Zhang ◽  
Guang Hui Han
Keyword(s):  
Relative Humidity ◽  
Thermal Comfort ◽  
Mean Radiant Temperature ◽  
Design Standards ◽  
Human Thermal Comfort ◽  
Radiant Cooling ◽  
Climate Parameter ◽  
Radiant Temperature ◽  
Thermal Comfort Model ◽  
The Impact

Relative humidity is an important micro-climate parameter in radiant cooling environment. Based on the human thermal comfort model, this paper studied the effect on PMV index of relative humidity, and studied the relationship of low mean radiant temperature and relative humidity, drew the appropriate design range of indoor relative humidity for radiant cooling systems.The results show that high relative humidity can compensate for the impact on thermal comfort of low mean radiant temperature, on the premise of achieving the same thermal comfort requirements. However, because of the limited compensation range of relative humidity, together with the constraints for it due to anti-condensation of radiant terminal devices, the design range of relative humidity should not be improved, and it can still use the traditional air-conditioning design standards.

Statistical Analysis of Weather Effects on PM2.5

2012 ◽  
Vol 610-613 ◽  
pp. 1033-1040
Author(s):  
Wei Dai ◽  
Jia Qi Gao ◽  
Bo Wang ◽  
Feng Ouyang
Keyword(s):  
Statistical Analysis ◽  
Wind Speed ◽  
Relative Humidity ◽  
Statistical Methods ◽  
Predictive Analytics ◽  
Hypothesis Test ◽  
Meteorological Data ◽  
Weather Conditions ◽  
Statistical Distribution ◽  
Weather Effects

Effects of weather conditions including temperature, relative humidity, wind speed, wind and direction on PM2.5 were studied using statistical methods. PM2.5 samples were collected during the summer and the winter in a suburb of Shenzhen. Then, correlations, hypothesis test and statistical distribution of PM2.5 and meteorological data were analyzed with IBM SPSS predictive analytics software. Seasonal and daily variations of PM2.5 have been found and these mainly resulted from the weather effects.

ENHANCING THERMAL COMFORT OF RESIDENTIAL BUILDINGS THROUGH A DUAL FUNCTIONAL PASSIVE SYSTEM (SOLAR-WALL)

2021 ◽  
Vol 16 (3) ◽  
pp. 155-177
Author(s):  
Shouib Mabdeh ◽  
Tamer Al Radaideh ◽  
Montaser Hiyari
Keyword(s):  
Thermal Comfort ◽  
Residential Buildings ◽  
Simulation Software ◽  
Design Parameters ◽  
Base Case ◽  
Passive System ◽  
Efficient System ◽  
Dual Functional ◽  
Solar Wall ◽  
New System

ABSTRACT Thermal comfort has a great impact on occupants’ productivity and general well-being. Since people spend 80–90% of their time indoors, developing the tools and methods that enhance the thermal comfort for building are worth investigating. Previous studies have proved that using passive systems like Trombe walls and solar chimneys significantly enhanced thermal comfort in inside spaces despite that each system has a specific purpose within a specific climate condition. Hence, the main purpose of this study is to design and configure a new, dual functional passive system, called a solar wall. The new system combines the Trombe wall and solar chimney, and it can cool or heat based on building needs. Simulation software, DesignBuilder, has been used to configure the Solar Wall, and study its impact on indoor operative temperature for the base case. Using the new system, the simulation results were compared with those obtained in the base case and analyzed to determine the most efficient system design parameters and implementation method. The case that gave the best results for solar wall configuration was triple glazed glass and 0.1 cm copper as an absorber (case 11). The results show that using four units (case D) achieves longer thermal comfort levels: 15 to 24 thermal hours during winter (compared to five hours maximum) and 10 to 19 comfort hours in summer (compared to zero).

Sign in / Sign up

Export Citation Format

Share Document