Structure - Property Relationships of Furanyl Thermosetting Polymer Materials Derived from Biobased Feedstocks

2021 ◽  
Author(s):  
Fengshuo Hu
Keyword(s):  
Polymer Materials ◽  
Structure Property ◽  
Structure Property Relationships ◽  
Thermosetting Polymer

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

scholarly journals Yellow electrochromic polymer materials with fine tuning electrofluorescences by adjusting steric hindrance of side chains

RSC Advances ◽  
2017 ◽  
Vol 7 (41) ◽  
pp. 25444-25449 ◽  
Author(s):  
Jian Liu ◽  
Yuchen Shi ◽  
Jingchuan Wu ◽  
Mei Li ◽  
Jianming Zheng ◽  
...  
Keyword(s):  
Steric Hindrance ◽  
External Potential ◽  
Polymer Materials ◽  
Fine Tuning ◽  
Side Chains ◽  
Structure Property ◽  
Structure Property Relationships ◽  
Electrochromic Polymer

A series of novel conducting conjugated yellow-to-transmissive electrochromic (EC) polymers were designed to research their structure–property relationships, achieving electrofluorescent (EF) switching with applied external potential.

scholarly journals Temperature-dependent modulation by biaryl-based monomers of the chain length and morphology of biphenyl-based supramolecular polymers

2021 ◽  
Author(s):  
E. W. Meijer ◽  
Lafayette L.N.J. De Windt ◽  
Brigitte Lamers ◽  
Elisabeth E. Weyandt ◽  
Mark Antonius Johannes Koenis ◽  
...  
Keyword(s):  
Chain Length ◽  
Functional Diversity ◽  
Polymer Materials ◽  
Supramolecular Polymers ◽  
Supramolecular Polymer ◽  
Structure Property ◽  
Temperature Dependent ◽  
Structure Property Relationships

Supramolecular copolymerizations offer attractive options to introduce structural and functional diversity in supramolecular polymer materials. Yet, general principles and structure-property relationships for rational comonomer design remain lacking. Here, we report...

scholarly journals Understanding structure–property relationships of main chain cyclopropane in linear polyesters

2020 ◽  
Vol 11 (39) ◽  
pp. 6251-6258
Author(s):  
Connor J. Stubbs ◽  
Andrew P. Dove
Keyword(s):  
Main Chain ◽  
Effective Means ◽  
Polymer Materials ◽  
Structure Property ◽  
Bulk Properties ◽  
Rigid Ring ◽  
Structure Property Relationships ◽  
Ring Structures

Rigid ring structures have gained increasing interest in the polymer materials community as an effective means to manipulate bulk properties. Here, we investigate structure–property relationships of the smallest ring: cyclopropane.

Approaches for TEM imaging of cavitation in toughened nylon

1989 ◽  
Vol 47 ◽  
pp. 352-353
Author(s):  
Barbara A. Wood
Keyword(s):  
Morphological Characteristics ◽  
Structure Property ◽  
Polymer Systems ◽  
Selective Staining ◽  
Structure Property Relationships ◽  
Rubber Toughened ◽  
Shear Yield ◽  
Controversial Topic ◽  
Selection Of ◽  
Diamond Knife

A controversial topic in the study of structure-property relationships of toughened polymer systems is the internal cavitation of toughener particles resulting from damage on impact or tensile deformation.Detailed observations of the influence of morphological characteristics such as particle size distribution on deformation mechanisms such as shear yield and cavitation could provide valuable guidance for selection of processing conditions, but TEM observation of damaged zones presents some experimental difficulties.Previously published TEM images of impact fractured toughened nylon show holes but contrast between matrix and toughener is lacking; other systems investigated have clearly shown cavitated impact modifier particles. In rubber toughened nylon, the physical characteristics of cavitated material differ from undamaged material to the extent that sectioning of heavily damaged regions by cryoultramicrotomy with a diamond knife results in sections of greater than optimum thickness (Figure 1). The detailed morphology is obscured despite selective staining of the rubber phase using the ruthenium trichloride route to ruthenium tetroxide.

Catalyst Halogenation Enables Rapid and Efficient Polymerizations with Visible to Near-Infrared Light

2020 ◽  
Author(s):  
Alex Stafford ◽  
Dowon Ahn ◽  
Emily Raulerson ◽  
Kun-You Chung ◽  
Kaihong Sun ◽  
...  
Keyword(s):  
Near Infrared ◽  
Transient Absorption ◽  
Reaction Times ◽  
Infrared Light ◽  
Structure Property ◽  
Light Emitting ◽  
Structure Property Relationships ◽  
Nir Light ◽  
Light Intensities ◽  
Emission Quenching

Driving rapid polymerizations with visible to near-infrared (NIR) light will enable nascent technologies in the emerging fields of bio- and composite-printing. However, current photopolymerization strategies are limited by long reaction times, high light intensities, and/or large catalyst loadings. Improving efficiency remains elusive without a comprehensive, mechanistic evaluation of photocatalysis to better understand how composition relates to polymerization metrics. With this objective in mind, a series of methine- and aza-bridged boron dipyrromethene (BODIPY) derivatives were synthesized and systematically characterized to elucidate key structure-property relationships that facilitate efficient photopolymerization driven by visible to NIR light. For both BODIPY scaffolds, halogenation was shown as a general method to increase polymerization rate, quantitatively characterized using a custom real-time infrared spectroscopy setup. Furthermore, a combination of steady-state emission quenching experiments, electronic structure calculations, and ultrafast transient absorption revealed that efficient intersystem crossing to the lowest excited triplet state upon halogenation was a key mechanistic step to achieving rapid photopolymerization reactions. Unprecedented polymerization rates were achieved with extremely low light intensities (< 1 mW/cm<sup>2</sup>) and catalyst loadings (< 50 μM), exemplified by reaction completion within 60 seconds of irradiation using green, red, and NIR light-emitting diodes.

A Review on Camptothecin Analogs with Promising Cytotoxic Profile

2019 ◽  
Vol 18 (13) ◽  
pp. 1796-1814 ◽  
Author(s):  
Sk. Abdul Amin ◽  
Nilanjan Adhikari ◽  
Tarun Jha ◽  
Shovanlal Gayen
Keyword(s):  
Cell Lines ◽  
Cancer Cell ◽  
Cancer Cell Lines ◽  
Structure Property ◽  
Cytotoxic Potential ◽  
Structure Property Relationships ◽  
Structure Activity ◽  
Camptothecin Analogs ◽  
Pharmacokinetic Properties ◽  
Quantitative Structure Activity Relationships

Camptothecin (CPT), obtained from Camptotheca acuminata (Nyssaceae), is a quinoline type of alkaloid. Apart from various traditional uses, it is mainly used as a potential cytotoxic agent acting against a variety of cancer cell lines. Though searches have been continued for last six decades, still it is a demanding task to design potent and cytotoxic CPTs. Different CPT analogs are synthesized to enhance the cytotoxic potential as well as to increase the pharmacokinetic properties of these analogs. Some of these analogs were proven to be clinically effective in different cancer cell lines. In this article, different CPT analogs have been highlighted extensively to get a detail insight about the structure-property relationships as well as different quantitative structure-activity relationships (QSARs) modeling of these analogs are also discussed. This study may be beneficial for designing newer CPT analogs in future.

Structure-property relationships in bainitic steels

1990 ◽  
Vol 21 (6) ◽  
pp. 1527-1540 ◽  
Author(s):  
D. V. Edmonds ◽  
R. C. Cochrane
Keyword(s):  
Structure Property ◽  
Structure Property Relationships ◽  
Bainitic Steels
Sign in / Sign up

Export Citation Format

Share Document