High performance IC clock networks with grid and tree topologies

High-performance clock networks are considered as a novel tool in geodesy. Today the latest generation of optical clocks approaches a fractional frequency uncertainty of 1.0x10-18, which corresponds to about 1.0 cm in height or 0.1 m2/s2 in geopotential. The connected clocks are thus promising to enable &#8220;relativistic geodesy&#8221; in practice: Gravity potential (or height) differences can be inferred through the ultra-precise comparison of clocks&#8217; frequencies.In this study, we will investigate the possibility of high-performance clock networks for detecting time-variable gravity signals. In the past two decades, the satellite gravity mission GRACE, now continued by its follow-on mission, has significantly improved our knowledge on the Earth&#8217;s gravity field, especially on its changes over time. However, the results are limited in terms of spatial resolution (about a few hundreds of kilometers) and temporal resolution (standard is one month). Terrestrial clock networks can be used to observe point-wise gravity potential values at locations of interest. By continuously tracking of changes w.r.t. a reference clock, time-series of gravity potential values are obtained, which reveal the gravity variations at these locations. To elaborate this idea, we will address the following research questions:<ul><li>Are clock measurements with the accuracy of 10-18 sensitive enough to time-variable gravity signals? Or what is the requirement on the clock&#8217;s performance for detecting time-variable gravity signals?</li> <li>Which kinds of time-variable signals can be &#8220;seen&#8221; by clocks, the long-term trends (yearly), seasonal variations or short-term changes (weekly/daily)?</li> <li>In which regions might clock networks be sensitive to time-variable gravity signals, in Amazon, Greenland or also in Europe?</li> <li>An &#8220;absolute&#8221; reference clock is required for a network that should be least affected by gravity variations. Where should it be placed?</li> </ul>We gratefully acknowledge the financial support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany&#8217;s Excellence Strategy EXC-2123 &#8220;QuantumFrontiers&#8221; (Project-ID: 390837967). This work is also funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) &#8211; Project-ID 434617780 &#8211; SFB 1464.

Download Full-text

A High Performance Energy Analyzer for Use in Electron Scanning Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100061975 ◽

1969 ◽

Vol 27 ◽

pp. 14-15

Author(s):

A. V. Crewe ◽

M. Isaacson ◽

D. Johnson

Keyword(s):

High Performance ◽

Vertical Plane ◽

Median Plane ◽

Electron Gun ◽

Uniform Field ◽

Loss Mechanism ◽

Electron Scanning Microscopy ◽

Sector Type ◽

Double Focusing ◽

Electron Energy Loss

A double focusing magnetic spectrometer has been constructed for use with a field emission electron gun scanning microscope in order to study the electron energy loss mechanism in thin specimens. It is of the uniform field sector type with curved pole pieces. The shape of the pole pieces is determined by requiring that all particles be focused to a point at the image slit (point 1). The resultant shape gives perfect focusing in the median plane (Fig. 1) and first order focusing in the vertical plane (Fig. 2).

Download Full-text

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100077967 ◽

1977 ◽

Vol 35 ◽

pp. 68-69

Author(s):

N. Yoshimura ◽

K. Shirota ◽

T. Etoh

Keyword(s):

Electron Microscope ◽

High Speed ◽

High Performance ◽

High Vacuum ◽

Vacuum System ◽

Pump System ◽

Pumping System ◽

Diffusion Pump ◽

Almost All ◽

Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

Download Full-text

Use of the Magnetostatic Analogue In Electromagnetic Lens Engineering

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100068795 ◽

1970 ◽

Vol 28 ◽

pp. 360-361

Author(s):

John W. Coleman

Keyword(s):

Boundary Conditions ◽

High Performance ◽

Force Fields ◽

Optical Design ◽

Direct Conversion ◽

Design Engineering ◽

Design Data ◽

Scalar Potentials ◽

Geometric Elements ◽

At Will

In the design engineering of high performance electromagnetic lenses, the direct conversion of electron optical design data into drawings for reliable hardware is oftentimes difficult, especially in terms of how to mount parts to each other, how to tolerance dimensions, and how to specify finishes. An answer to this is in the use of magnetostatic analytics, corresponding to boundary conditions for the optical design. With such models, the magnetostatic force on a test pole along the axis may be examined, and in this way one may obtain priority listings for holding dimensions, relieving stresses, etc..The development of magnetostatic models most easily proceeds from the derivation of scalar potentials of separate geometric elements. These potentials can then be conbined at will because of the superposition characteristic of conservative force fields.

Download Full-text

Prospects for convergent beam electron diffraction with a 200kV cold field-emission transmission electron microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086635 ◽

1991 ◽

Vol 49 ◽

pp. 466-467

Author(s):

J W Steeds ◽

R Vincent

Keyword(s):

Field Emission ◽

High Performance ◽

Small Diameter ◽

Convergent Beam Electron Diffraction ◽

Zone Axis ◽

Medium Voltage ◽

Transmission Electron ◽

Good Crystallinity ◽

Special Modification ◽

Convergent Beam

We review the analytical powers which will become more widely available as medium voltage (200-300kV) TEMs with facilities for CBED on a nanometre scale come onto the market. Of course, high performance cold field emission STEMs have now been in operation for about twenty years, but it is only in relatively few laboratories that special modification has permitted the performance of CBED experiments. Most notable amongst these pioneering projects is the work in Arizona by Cowley and Spence and, more recently, that in Cambridge by Rodenburg and McMullan.There are a large number of potential advantages of a high intensity, small diameter, focussed probe. We discuss first the advantages for probes larger than the projected unit cell of the crystal under investigation. In this situation we are able to perform CBED on local regions of good crystallinity. Zone axis patterns often contain information which is very sensitive to thickness changes as small as 5nm. In conventional CBED, with a lOnm source, it is very likely that the information will be degraded by thickness averaging within the illuminated area.

Download Full-text

Current State of Biological High-Resolution Scanning Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100102985 ◽

1988 ◽

Vol 46 ◽

pp. 180-181 ◽

Cited By ~ 1

Author(s):

Klaus-Ruediger Peters

Keyword(s):

High Performance ◽

Low Voltage ◽

Backscattered Electrons ◽

Lens Position ◽

Low Voltage Operation ◽

Signal Collection ◽

Probe Size ◽

Electron Microscopes ◽

Scanning Electron Microscopes ◽

Scanning Electron

A new generation of high performance field emission scanning electron microscopes (FSEM) is now commercially available (JEOL 890, Hitachi S 900, ISI OS 130-F) characterized by an "in lens" position of the specimen where probe diameters are reduced and signal collection improved. Additionally, low voltage operation is extended to 1 kV. Compared to the first generation of FSEM (JE0L JSM 30, Hitachi S 800), which utilized a specimen position below the final lens, specimen size had to be reduced but useful magnification could be impressively increased in both low (1-4 kV) and high (5-40 kV) voltage operation, i.e. from 50,000 to 200,000 and 250,000 to 1,000,000 x respectively.At high accelerating voltage and magnification, contrasts on biological specimens are well characterized1 and are produced by the entering probe electrons in the outmost surface layer within -vl nm depth. Backscattered electrons produce only a background signal. Under these conditions (FIG. 1) image quality is similar to conventional TEM (FIG. 2) and only limited at magnifications >1,000,000 x by probe size (0.5 nm) or non-localization effects (%0.5 nm).

Download Full-text