Seismic refraction observations north of the Brownson Deep*

1952 ◽  
Vol 42 (4) ◽  
pp. 291-306
Author(s):  
J. B. Hersey ◽  
Charles B. Officer ◽  
H. R. Johnson ◽  
S. Bergstrom

Abstract Results of several refraction profiles made on the rise to the north of the Brownson Deep are presented. Good evidence for a high-speed layer with travel-time curves showing a compressional velocity of 7.94 km/sec. and an intercept of 8.4 sec. is presented, and the presence of an overlying lower-speed layer (6.64 km/sec., intercept 8.1 sec.) is demonstrated on less complete evidence. Neither layer correlates with existing reflection data in the area. Two sets of secondary low-frequency arrivals are tentatively interpreted as a refracted shear wave and a wave that has taken a bottom and surface reflection and then a basement refraction. Evidence is presented for a newly observed forerunner of the refracted-surface reflected waves of the permanent sound channel (RSR waves) consisting of a train of nearly constant frequency waves which appear to travel between surface and bottom via the RSR path and along the bottom at the speed of sound in water at the bottom.

1987 ◽  
Vol 24 (11) ◽  
pp. 2160-2171 ◽  
Author(s):  
E. R. Kanasewich ◽  
Z. Hajnal ◽  
A. G. Green ◽  
G. L. Cumming ◽  
R. F. Mereu ◽  
...  

The seismic refraction method was used in 1981 to study the crust under the northern half of the Williston Basin, in Saskatchewan. A new method of spatial seismic recording, based on a triangular arrangement of receivers, was used for the first time to obtain three-dimensional structure and velocity information. The broadside seismic refraction and wide-angle reflection data obtained by the technique were of particular value in defining several faulted blocks. These blocks are also characterized by aeromagnetic anomalies trending in a northerly direction. The crustal thickness in the southern part of the western provinces shows large variation ranging from 35 to 50 km. Much of the area is also notable for the presence of one or more low-velocity layers and a high-velocity lower crust. There is good evidence for significant lateral heterogeneity, and detailed deep seismic reflection and refraction studies would likely yield information on dips and strikes of beds and faults around the basin as well as define the properties of the various terranes of the Hudsonian mobile belt.


2005 ◽  
Vol 42 (4) ◽  
pp. 435-456 ◽  
Author(s):  
Balázs Németh ◽  
Ron M Clowes ◽  
Zoltan Hajnal

The Trans-Hudson Orogen (THO) is the world's largest Paleoproterozoic orogenic belt. Data from three refraction profiles are used to investigate its lithospheric structure in Saskatchewan and Manitoba. R1 crosses the orogen from the Hearne craton on the west to the Superior craton on the east; R2 and R3 are along the orogen. P-wave velocity structural models are generated using a ray-based technique. On line R1, higher crustal velocities in its eastern part coincide with rocks of the Flin Flon – Namew gneiss complex. Depth to Moho is in the 40–45 km range and equates to that from the reflection data, including a small crustal root below the Sask minicontinent. Along lines R2 and R3, depth to Moho varies from about 40 km up to 55 km at the north end of R2 and south end of R3. In general, variations in crustal velocity and depth to Moho do not correlate with the location and extent of geological domains; they appear to reflect the complex deformation and metamorphic history of the crustal rocks. Mantle velocities are high, ~8.2 km/s. However a limited area shows prominent velocity anisotropy, with values of 8.6 km/s along R2 and R3 and 8.1 km/s along R1. We speculate that the observed anisotropy represents an ~100-km-wide mantle suture zone resulting from the collision of Archean plates. The suture zone accommodated limited extensional deformation, associated with a counterclockwise rotation of the Superior plate, to generate the anisotropy. In this model, the lithospheric mantle of the THO internal domains and Sask craton are detached.


Geophysics ◽  
2017 ◽  
Vol 82 (6) ◽  
pp. Q67-Q78 ◽  
Author(s):  
Yi Liu ◽  
Martin Landrø ◽  
Børge Arntsen ◽  
Joost van der Neut ◽  
Kees Wapenaar

For a robust way of estimating time shifts near horizontal boreholes, we have developed a method for separating the reflection responses above and below a horizontal borehole. Together with the surface reflection data, the method uses the direct arrivals from borehole data in the Marchenko method. The first step is to retrieve the focusing functions and the up-down wavefields at the borehole level using an iterative Marchenko scheme. The second step is to solve two linear equations using a least-squares minimizing method for the two desired reflection responses. Then, the time shifts that are directly linked to the changes on either side of the borehole are calculated using a standard crosscorrelation technique. The method is applied with good results to synthetic 2D pressure data from the North Sea. One example uses purely artificial velocity changes (negative above the borehole and positive below), and the other example uses more realistic changes based on well logs. In the 2D case with an adequate survey coverage at the surface, the method is completely data driven. In the 3D case in which there is a limited number of horizontal wells, a kinematic correct velocity model is needed, but only for the volume between the surface and the borehole. Possible error factors related to the Marchenko scheme, such as an inaccurate source wavelet, imperfect surface multiples removal, and medium with loss are not included in this study.


2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.


2002 ◽  
Vol 199 ◽  
pp. 25-31
Author(s):  
N. Udaya Shankar

The Mauritius Radio Telescope (MRT) is a Fourier synthesis instrument which has been built to fill the gap in the availability of deep sky surveys at low radio frequencies in the southern hemisphere. It is situated in the north-east of Mauritius at a southern latitude of 20°.14 and an eastern longitude of 57°.73. The aim of the survey with the MRT is to contribute to the database of southern sky sources in the declination range −70° ≤ δ ≤ −10°, covering the entire 24 hours of right ascension, with a resolution of 4' × 4'.6sec(δ + 20.14°) and a point source sensitivity of 200 mJy (3σ level) at 151.5 MHz.MRT is a T-shaped non-coplanar array consisting of a 2048 m long East-West arm and a 880 m long South arm. In the East-West arm 1024 fixed helices are arranged in 32 groups and in the South arm 16 trolleys, with four helices on each, which move on a rail are used. A 512 channel, 2-bit 3-level complex correlation receiver is used to measure the visibility function. At least 60 days of observing are required for obtaining the visibilities up to the 880 m spacing. The calibrated visibilities are transformed taking care of the non-coplanarity of the array to produce an image of the area of the sky under observation.This paper will describe the telescope, the observations carried out so far, a few interesting aspects of imaging with this non-coplanar array and present results of a low resolution survey (13' × 18') covering roughly 12 hours of right ascension, and also present an image with a resolution of 4' × 4'.6sec(δ + 20.14°) made using the telescope.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1548
Author(s):  
Jiuling Hu ◽  
Lianjin Hong ◽  
Lili Yin ◽  
Yu Lan ◽  
Hao Sun ◽  
...  

At present, high-speed underwater acoustic communication requires underwater transducers with the characteristics of low frequency and broadband. The low-frequency transducers also are expected to be low-frequency directional for realization of point-to-point communication. In order to achieve the above targets, this paper proposes a new type of flextensional transducer which is constructed of double mosaic piezoelectric ceramic rings and spherical cap metal shells. The transducer realizes broadband transmission by means of the coupling between radial vibration of the piezoelectric rings and high-order flexural vibration of the spherical cap metal shells. The low-frequency directional transmission of the transducer is realized by using excitation signals with different amplitude and phase on two mosaic piezoelectric rings. The relationship between transmitting voltage response (TVR), resonance frequency and structural parameters of the transducer is analyzed by finite element software COMSOL. The broadband performance of the transducer is also optimized. On this basis, the low-frequency directivity of the transducer is further analyzed and the ratio of the excitation signals of the two piezoelectric rings is obtained. Finally, a prototype of the broadband ring flextensional underwater transducer is fabricated according to the results of simulation. The electroacoustic performance of the transducer is tested in an anechoic water tank. Experimental results show that the maximum TVR of the transducer is 147.2 dB and the operation bandwidth is 1.5–4 kHz, which means that the transducer has good low-frequency, broadband transmission capability. Meanwhile, cardioid directivity is obtained at 1.4 kHz and low-frequency directivity is realized.


Sign in / Sign up

Export Citation Format

Share Document