Rupture Process of the M 6.5 Stanley, Idaho, Earthquake Inferred from Seismic Waveform and Geodetic Data

2020 ◽  
Author(s):  
Fred F. Pollitz ◽  
William C. Hammond ◽  
Charles W. Wicks
Keyword(s):  
Near Field ◽  
Strike Slip ◽  
Fault System ◽  
Interferometric Synthetic Aperture Radar ◽  
Aftershock Activity ◽  
Lateral Strike Slip ◽  
Seismic Waveforms ◽  
The North ◽  
Seismic Waveform ◽  
Data Yield

Abstract The 2020 M 6.5 Stanley, Idaho, earthquake produced rupture in the north of the active Sawtooth fault in the northern basin and range at depth, without any observable surface rupture. Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar (InSAR) data yield several millimeters of static offsets out to ∼100  km from the rupture and up to ∼0.1  m of near-field crustal deformation. We combine the GPS and InSAR data with long-period regional seismic waveforms to derive models of kinematic slip and afterslip. We find that the coseismic rupture is complex, likely involving up to 2 m combined left-lateral strike slip and normal slip on a previously unidentified ∼south-southeast-striking fault. This slip is predominantly left-lateral strike slip, different from the dominant east-northeast–west-northwest normal faulting of the region. At least one ∼northeast-trending fault, likely associated with the Trans-Challis fault system, is inferred to have accommodated a few decimeters of right-lateral afterslip, consistent with vigorous aftershock activity at depth along northeast-trending lineations.

Aftershocks of the Managua, Nicaragua, earthquake of December 23, 1972

1974 ◽  
Vol 64 (4) ◽  
pp. 1005-1016
Author(s):  
C. J. Langer ◽  
M. G. Hopper ◽  
S. T. Algermissen ◽  
J. W. Dewey
Keyword(s):  
Fault Plane ◽  
Strike Slip ◽  
Fault System ◽  
Fault Plane Solutions ◽  
Lateral Strike Slip ◽  
Seismic Zones ◽  
The North ◽  
Primary Zone ◽  
Slip Displacement ◽  
Strain Release

abstract Epicenters determined from 164 of the Managua aftershocks define two seismic zones. The primary zone, which is 15 to 20 km in length and strikes northeast along the Tiscapa-Ciudad Jardin fault system, contains 80 per cent of the aftershock locations. A subsidiary zone, northwest of Managua, suggests strain release possibly related to the north-south striking San Judas fault. Depth of foci are principally in the upper 7 km for both zones. Composite fault-plane solutions indicate a predominate left-lateral strike-slip displacement; the preferred planes for each zone agree with the strike of surface fractures or previously mapped faults.

Is the North Altyn fault part of a strike-slip duplex along the Altyn Tagh fault system?

Geology ◽  
2000 ◽  
Vol 28 (3) ◽  
pp. 255 ◽  
Author(s):  
Eric Cowgill ◽  
An Yin ◽  
Wang Xiao Feng ◽  
Zhang Qing
Keyword(s):  
Strike Slip ◽  
Fault System ◽  
Altyn Tagh Fault ◽  
The North ◽  
Altyn Tagh

Inversion of regional surface-wave spectra for source parameters of aftershocks from the 1992 Petrolia earthquake sequence

1995 ◽  
Vol 85 (3) ◽  
pp. 705-715
Author(s):  
Mark Andrew Tinker ◽  
Susan L. Beck
Keyword(s):  
Surface Wave ◽  
Focal Mechanism ◽  
Source Parameters ◽  
Strike Slip ◽  
Earthquake Sequence ◽  
Fault System ◽  
Accretionary Wedge ◽  
Wave Spectra ◽  
The North ◽  
Gorda Plate

Abstract Regional distance surface waves are used to study the source parameters for moderate-size aftershocks of the 25 April 1992 Petrolia earthquake sequence. The Cascadia subduction zone had been relatively seismically inactive until the onset of the mainshock (Ms = 7.1). This underthrusting event establishes that the southern end of the North America-Gorda plate boundary is seismogenic. It was followed by two separate and distinct large aftershocks (Ms = 6.6 for both) occurring at 07:41 and 11:41 on 26 April, as well as thousands of other small aftershocks. Many of the aftershocks following the second large aftershock had magnitudes in the range of 4.0 to 5.5. Using intermediate-period surface-wave spectra, we estimate focal mechanisms and depths for one foreshock and six of the larger aftershocks (Md = 4.0 to 5.5). These seven events can be separated into two groups based on temporal, spatial, and principal stress orientation characteristics. Within two days of the mainshock, four aftershocks (Md = 4 to 5) occurred within 4 hr of each other that were located offshore and along the Mendocino fault. These four aftershocks comprise one group. They are shallow, thrust events with northeast-trending P axes. We interpret these aftershocks to represent internal compression within the North American accretionary prism as a result of Gorda plate subduction. The other three events compose the second group. The shallow, strike-slip mechanism determined for the 8 March foreshock (Md = 5.3) may reflect the right-lateral strike-slip motion associated with the interaction between the northern terminus of the San Andreas fault system and the eastern terminus of the Mendocino fault. The 10 May aftershock (Md = 4.1), located on the coast and north of the Mendocino triple junction, has a thrust fault focal mechanism. This event is shallow and probably occurred within the accretionary wedge on an imbricate thrust. A normal fault focal mechanism is obtained for the 5 June aftershock (Md = 4.8), located offshore and just north of the Mendocino fault. This event exhibits a large component of normal motion, representing internal failure within a rebounding accretionary wedge. These two aftershocks and the foreshock have dissimilar locations in space and time, but they do share a north-northwest oriented P axis.

Secondary faulting near the terminus of a seismogenic strike-slip fault: Aftershocks of the 1976 Guatemala earthquake

1979 ◽  
Vol 69 (2) ◽  
pp. 427-444
Author(s):  
C. J. Langer ◽  
G. A. Bollinger
Keyword(s):  
Focal Mechanism ◽  
Linear Trend ◽  
Strike Slip ◽  
Strike Slip Fault ◽  
Aftershock Activity ◽  
Focal Mechanism Solutions ◽  
The North ◽  
Composite Focal Mechanism ◽  
Theoretical Pattern ◽  
Main Fault

abstract Aftershocks of the February 4, 1976 Guatemalan earthquake (Ms = 7.5) were monitored by a network of portable seismographs from February 9 to February 27. Although seismic data were obtained all along the 230-km surface rupture of the causal Motagua fault, the field program was designed to concentrate on the aftershock activity at the western terminus of the fault. Data from that locale revealed several linear or near-linear trends of aftershock epicenters that splay to the southwest away from the western end of the main fault. These trends correlate spatially with mapped surface lineaments and, to some degree, with ground breakage patterns near Guatemala City. The observed splay pattern of aftershocks and the normal-faulting mode of the splay earthquakes determined from composite focal mechanism solutions, may be explained by a theoretical pattern of stress trajectories at the terminus of a strike-slip fault. Composite focal mechanism solutions for aftershocks located on or near the surface break of the Motagua fault, to the north and east of the linear trend splay area, agree with the mapped surface movements, i.e., left-lateral strike-slip.

Aftershocks and surface faulting associated with the intraplate Guinea, West Africa, earthquake of 22 December 1983

1987 ◽  
Vol 77 (5) ◽  
pp. 1579-1601
Author(s):  
C. J. Langer ◽  
M. G. Bonilla ◽  
G. A. Bollinger
Keyword(s):  
West Africa ◽  
Focal Mechanism ◽  
Main Shock ◽  
Strike Slip ◽  
Fault System ◽  
Epicentral Area ◽  
Lateral Strike Slip ◽  
Focal Mechanism Solutions ◽  
Short Period ◽  
East West

Abstract This study reports on the results of geological and seismological field studies conducted following the rare occurrence of a moderate-sized West African earthquake (mb = 6.4) with associated ground breakage. The epicentral area of the northwestern Guinea earthquake of 22 December 1983 is a coastal margin, intraplate locale with a very low level of historical seismicity. The principal results include the observation that seismic faulting occurred on a preexisting fault system and that there is good agreement among the surface faulting, the spatial distribution of the aftershock hypocenters, and the composite focal mechanism solutions. We are not able, however, to shed any light on the reason(s) for the unexpected occurrence of this intraplate earthquake. Thus, the significance of this study is its contribution to the observational datum for such earthquakes and for the seismicity of West Africa. The main shock was associated with at least 9 km of surface fault-rupture. Trending east-southeast to east-west, measured fault displacements up to ∼13 cm were predominantly right-lateral strike slip and were accompanied by an additional component (5 to 7 cm) of vertical movement, southwest side down. The surface faulting occurred on a preexisting fault whose field characteristics suggest a low slip rate with very infrequent earthquakes. There were extensive rockfalls and minor liquefaction effects at distances less than 10 km from the surface faulting and main shock epicenter. Main shock focal mechanism solutions derived from teleseismic data by other workers show a strong component of normal faulting motion that was not observed in the ground ruptures. A 15-day period of aftershock monitoring, commencing 22 days after the main shock, was conducted. Eleven portable, analog short-period vertical seismographs were deployed in a network with an aperture of 25 km and an average station spacing of 7 km. Ninety-five aftershocks were located from the more than 200 recorded events with duration magnitudes of about 1.5 or greater. Analysis of a selected subset (91) of those events define a tabular aftershock volume (26 km long by 14 km wide by 4 km thick) trending east-southeast and dipping steeply (∼60°) to the south-southwest. Composite focal mechanisms for groups of events, distributed throughout the aftershock volume, exhibit right-lateral, strike-slip motion on subvertical planes that strike almost due east. Although the general agreement between the field geologic and seismologic results is good, our preferred interpretation is for three en-echelon faults striking almost due east-west.

The southern Mexico block: main boundaries and new estimation for its Quaternary motion

2008 ◽  
Vol 179 (2) ◽  
pp. 209-223 ◽  
Author(s):  
Louis Andreani ◽  
Xavier Le Pichon ◽  
Claude Rangin ◽  
Juventino Martínez-Reyes
Keyword(s):  
North American ◽  
Triple Junction ◽  
Strike Slip ◽  
North American Plate ◽  
Southern Mexico ◽  
Active Deformation ◽  
Lateral Strike Slip ◽  
Counterclockwise Rotation ◽  
The North ◽  
Slip Partitioning

Abstract Numerous studies, mainly based on structural and paleomagnetic data, consider southern Mexico as a crustal block (southern Mexico block, SMB) uncoupled from the North American plate with a southeast motion with respect to North America, accommodated by extension through the central Trans-Mexican volcanic belt (TMVB). On the other hand, the accommodation of this motion on the southeastward boundary, especially at the Cocos–Caribbean–North American triple junction, is still debated. The boundary between the SMB and the North American plate is constituted by three connected zones of deformation: (1) left-lateral transtension across the central TMVB, (2) left-lateral strike-slip faulting along the eastern TMVB and Veracruz area and (3) reverse and left-lateral strike-slip faulting in the Chiapas area. We show that these three active deformation zones accommodate a counterclockwise rotation of the SMB with respect to the North American plate. We specially discuss the Quaternary motion of the SMB with respect to the surrounding plates near the Cocos–Caribbean–North American triple junction. The model we propose predicts a Quaternary counterclockwise rotation of 0.45°/Ma with a pole located at 24.2°N and 91.8°W. Finally we discuss the geodynamic implications of this counterclockwise rotation. The southern Mexico block motion is generally assumed to be the result of slip partitioning at the trench. However the obliquity of the subduction is too small to explain slip partitioning. The motion could be facilitated by the high thermal gradient and gravitational collapse that affects central Mexico and/or by partial coupling with the eastward motion of the Caribbean plate.

scholarly journals Propagation of a strike-slip plate boundary within an extensional environment: the westward propagation of the North Anatolian Fault

2016 ◽  
Vol 53 (11) ◽  
pp. 1416-1439 ◽  
Author(s):  
Xavier Le Pichon ◽  
A.M. Celâl Şengör ◽  
Julia Kende ◽  
Caner İmren ◽  
Pierre Henry ◽  
...  
Keyword(s):  
Plate Boundary ◽  
Strike Slip ◽  
Fault System ◽  
Plate Boundaries ◽  
Sea Of Marmara ◽  
The North ◽  
Gulf Of Corinth ◽  
Northern Border ◽  
North Aegean ◽  
Narrow Plate

We document the establishment of the Aegea–Anatolia/Eurasia plate boundary in Pliocene–Pleistocene time. Before 2 Ma, no localized plate boundary existed north of the Aegean portion of the Anatolia plate and the shear produced by the motion of Anatolia–Aegea with respect to Eurasia was distributed over the whole width of the Aegean – West Anatolian western portion. In 4.5 Ma, a shear zone comparable to the Gulf of Corinth was formed in the present Sea of Marmara. The initial extensional basins were cut by the strike-slip Main Marmara Fault system after 2.5 Ma. Shortly after, the plate boundary migrated west of the Sea of Marmara along the northern border of Aegea from the North Aegean Trough, to the Gulf of Corinth area and to the Kefalonia Fault. There, it finally linked with the northern tip of the Aegean subduction zone, completing the system of plate boundaries delimiting the Anatolia–Aegea plate. We have related the change in the distribution of shear from Miocene to Pliocene to the formation of a relatively undeforming Aegea block in Pliocene that forced the shear to be distributed over a narrow plate boundary to the north of it. We attribute the formation of this block to the northeastward progression of the oceanic Ionian slab. We propose that the slab cuts the overlying lithosphere from asthenospheric sources and induces a shortening environment over it.

Geological mapping of the 1985 Chinese—British Tibetan (Xizang—Qinghai) Plateau Geotraverse route

1988 ◽  
Vol 327 (1594) ◽  
pp. 287-305 ◽  
Keyword(s):  
Strike Slip ◽  
Geological Mapping ◽  
Strike Slip Fault ◽  
Fault System ◽  
Late Triassic ◽  
Clastic Rocks ◽  
The North ◽  
Opposite Sequence ◽  
Geological Map ◽  
Qiangtang Terrane

The 1:500,000 coloured geological map of the traverse route combines observations from the Geotraverse, previous mapping, and interpretation of orbital images. The position of all localities visited by Geotraverse participants and basic geological data collected by them along the traverse route are shown on a set of maps originally drawn at 1:100,000 scale, reproduced on microfiche for this publication. More detailed mapping, beyond a single line of section, was achieved in five separate areas. The relationships between major rock units in these areas, and their significance, are outlined in this paper. Near Gyanco, (Lhasa Terrane) an ophiolite nappe, apparently connected with outcrops of ophiolites in the Banggong Suture about 100 km to the north, was under thrust by a discontinuous slice of Carboniferous—Permian clastic rocks and limestone, contrary to a previous report of the opposite sequence. At Amdo, a compressional left-lateral strike-slip fault zone has modified relationships along the Banggong Suture. Near Wuli, (northern Qiangtang Terrane) limited truncation of Triassic strata at the angular unconformity below Eocene redbeds demonstrates that most of the folding here is of Tertiary age. The map of the nearby Erdaogou region displays strong fold and thrust-shortening of the Eocene redbeds, evidence of significant crustal shortening after the India- Asia collision began. In the Xidatan-Kunlun Pass area, blocks of contrasting Permo—Triassic rocks are separated by east-trending faults. Some of these faults are ductile and of late Triassic — early Jurassic age, others are brittle and part of the Neogene—Quaternary Kunlun leftlateral strike-slip fault system. Some more significant remaining problems that geological mapping might help to solve are discussed briefly, including evidence for a possible additional ophiolitic suture within the Qiangtang Terrane.

Joint multidisciplinary study of the Saint-Sauveur–Donareo fault (lower Var valley, French Riviera): a contribution to seismic hazard assessment in the urban area of Nice

2011 ◽  
Vol 182 (4) ◽  
pp. 323-336 ◽  
Author(s):  
Christophe Larroque ◽  
Bertrand Delouis ◽  
Jean-Claude Hippolyte ◽  
Anne Deschamps ◽  
Thomas Lebourg ◽  
...  
Keyword(s):  
Seismic Hazard ◽  
Urban Areas ◽  
Regional Scale ◽  
Active Faults ◽  
Focal Depth ◽  
Strike Slip ◽  
Fault System ◽  
Geophysical Investigation ◽  
Lateral Strike Slip ◽  
North East

AbstractThe lower Var valley is the only large outcropping zone of Plio-Quaternary terrains throughout the southwestern Alps. In order to assess the seismic hazard for the Alps – Ligurian basin junction, we investigated this area to provide a record of earthquakes that have recently occurred near the city of Nice. Although no historical seismicity has been indicated for the lower Var valley, our main objective was to identify traces of recent faulting and to discuss the seismogenic potential of any active faults. We organized multidisciplinary observations as a microseismic investigation (the PASIS survey), with morphotectonic mapping and imagery, and subsurface geophysical investigations. The results of the PASIS dense recording survey were disappointing, as no present-day intense microseismic activity was recorded. From the morphotectonic investigation of the lower Var valley, we revealed several morphological anomalies, such as drainage perturbations and extended linear anomalies that are unrelated to the lithology. These anomalies strike mainly NE-SW, with the major Saint-Sauveur – Donareo lineament, clearly related to faulting of the Plio-Pleistocene sedimentary series. Sub-surface geophysical investigation (electrical resistivity tomography profiling) imaged these faults in the shallow crust, and together with the microtectonic data, allow us to propose the timing of recent faulting in this area. Normal and left-lateral strike-slip faulting occurred several times during the Pliocene. From fault-slip data, the last episode of faulting was left-lateral strike-slip and was related to a NNW-SSE direction of compression. This direction of compression is consistent with the present-day state of stress and the Saint-Sauveur–Donareo fault might have been reactivated several times as a left-lateral fault during the Quaternary. At a regional scale, in the Nice fold-and-thrust belt, these data lead to a reappraisal of the NE-SW structural trends as the major potentially active fault system. We propose that the Saint-Sauveur–Donareo fault belongs to a larger system of faults that runs from near Villeneuve-Loubet to the southwest to the Vésubie valley to the north-east. The question of a structural connection between the Vésubie – Mt Férion fault, the Saint-Sauveur–Donareo fault and its possible extension offshore through the northern Ligurian margin is discussed.The Saint-Sauveur–Donareo fault shows two en-échelon segments that extend for about 8 km. Taking into account the regional seismogenic depth (about 10 km), this fault could produce M ~6 earthquakes if activated entirely during one event. Although a moderate magnitude generally yields a moderate seismic hazard, we suggest that this contribution to the local seismic risk is high, taking into account the possible shallow focal depth and the high vulnerability of Nice and the surrounding urban areas.

Is the North Altyn fault part of a strike-slip duplex along the Altyn Tagh fault system?

Geology ◽  
2000 ◽  
Vol 28 (3) ◽  
pp. 255-258 ◽  
Author(s):  
Eric Cowgill ◽  
An Yin ◽  
Wang Xiao Feng ◽  
Zhang Qing
Keyword(s):  
Strike Slip ◽  
Fault System ◽  
Altyn Tagh Fault ◽  
The North ◽  
Altyn Tagh
Sign in / Sign up

Export Citation Format

Share Document