The Site Characterization Scheme of the INGV Strong Motion Database (ISMD): Overview and Site Classification

2017 ◽  
Vol 89 (1) ◽  
pp. 86-98 ◽  
Author(s):  
Claudia Mascandola ◽  
Marco Massa ◽  
Sara Lovati ◽  
Paolo Augliera
Keyword(s):  
Strong Motion ◽  
Site Characterization ◽  
Site Classification ◽  
Strong Motion Database

scholarly journals Seismic Site Classification from the Horizontal-to-Vertical Response Spectral Ratios: Use of the Spanish Strong-Motion Database

Geosciences ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 294 ◽  
Author(s):  
Luis A. Pinzón ◽  
Luis G. Pujades ◽  
Albert Macau ◽  
Emilio Carreño ◽  
Juan M. Alcalde
Keyword(s):  
Epistemic Uncertainty ◽  
Ground Motions ◽  
Strong Motion ◽  
Response Spectra ◽  
Site Classification ◽  
Spectral Ratios ◽  
Predominant Period ◽  
Strong Motion Database ◽  
Ground Motion Records ◽  
Different Response

Normally, the average of the horizontal-to-vertical (H/V) ratios of the 5% damped response spectra of ground motions is used to classify the site of strong-motion stations. In these cases, only the three-orthogonal as-recorded acceleration components are used in the analysis, and all the vector compositions that can generate a different response for each period oscillator are excluded. In this study, the Spanish strong-motion database was used to classify the sites of accelerometric stations based on the predominant periods through the average horizontal-to-vertical spectral ratios (HVSR) of recorded ground motions. Moreover, the directionality effects using the vector composition of the horizontal components of ground motions were also considered in the estimations of H/V ratios. This consideration is a relevant novelty compared to the traditional H/V ratios methods. Only earthquakes with magnitudes above 3.5 and hypocentral distances below 200 km were selected, which resulted in 692 ground-motion records, corresponding to 86 stations, from events in the period between 1993 and 2017. After the analysis, a predominant-period site classification was assigned to each station. On the whole, the obtained mean and standard deviation values of the spectral ratios are comparable to those shown by other researchers. Therefore, the advantages of the proposed procedure, which takes the directionality effects into account, can be summarized as follows: (a) The obtained information is richer and gives enables more sophisticated and realistic analyses on the basis of percentiles and (b) it is easier to detect anomalous stations, sites, and/or accelerograms. Moreover, the method eliminates the effect of directionality as a contributor to epistemic uncertainty.

Site characterization of strong-motion stations of Himalaya and adjoining plains

2021 ◽  
Vol 14 (10) ◽  
Author(s):  
Bhavesh Pandey ◽  
Ravi Sankar Jakka ◽  
Ashok Kumar ◽  
Mukat Lal Sharma
Keyword(s):  
Strong Motion ◽  
Site Characterization

The Effect of Type and Height of Piers on the Seismic Behavior of Reinforced Concrete Bridges

2019 ◽  
Vol 41 ◽  
pp. 79-87 ◽  
Author(s):  
Mohamed Cherif Djemai ◽  
Mahmoud Bensaibi ◽  
Fatma Zohra Halfaya
Keyword(s):  
Reinforced Concrete ◽  
Structural Parameters ◽  
Strong Motion ◽  
Concrete Bridges ◽  
Geometrical Parameters ◽  
Girder Bridges ◽  
Building Research Institute ◽  
Reinforced Concrete Bridges ◽  
Dynamic Analyses ◽  
Strong Motion Database

Bridges are commonly used lifelines; they play an important role in the economic activity of a city or a region and their role can be crucial in a case of a seismic event since they allow the arrival of the first aid. Reinforced concrete (RC) bridges are worldwide used type view their durability, flexibility and economical cost. In fact, their behavior under seismic loading was the aim of various studies. In the present study the effect of two structural parameters i.e. the height and the type of piers of reinforced concrete bridges on seismic response is investigated. For that reason, different multi-span continuous girder bridges models with various geometrical parameters are considered. Then, non-linear dynamic analyses are performed based on two types of piers which are: multiple columns bent and wall piers with varying heights. In this approach, a serie of 40 ground motions records varying from weak to strong events selected from Building Research Institute (BRI) strong motion database are used including uncertainty in the soil and seismic characteristics. Modelling results put most emphasis on the modal periods and responses of the top pier displacements, they show the influence of the considered parameters on the behavior of such structures and their impact on the strength of reinforced concrete bridges.

scholarly journals The Engineering Strong‐Motion Database: A Platform to Access Pan‐European Accelerometric Data

2016 ◽  
Vol 87 (4) ◽  
pp. 987-997 ◽  
Author(s):  
Lucia Luzi ◽  
Rodolfo Puglia ◽  
Emiliano Russo ◽  
Maria D'Amico ◽  
Chiara Felicetta ◽  
...  
Keyword(s):  
Strong Motion ◽  
Strong Motion Database

Seismic Response of Embankment Dams Based on Recorded Strong-Motion Data in Japan

2019 ◽  
Vol 35 (2) ◽  
pp. 955-976 ◽  
Author(s):  
DongSoon Park ◽  
Tadahiro Kishida
Keyword(s):  
Time Series ◽  
Seismic Response ◽  
Prediction Models ◽  
Strong Motion ◽  
Dynamic Responses ◽  
Design Stage ◽  
Ground Acceleration ◽  
Motion Data ◽  
Embankment Dams ◽  
Strong Motion Database

It is important to investigate strong-motion time series recorded at dams to understand their complex seismic responses. This paper develops a strong-motion database recorded at existing embankment dams and analyzes correlations between dam dynamic responses and ground-motion parameters. The Japan Commission on Large Dams database used here includes 190 recordings at the crests and foundations of 60 dams during 54 earthquakes from 1978 to 2012. Seismic amplifications and fundamental periods from recorded time series were computed and examined by correlation with shaking intensities and dam geometries. The peak ground acceleration (PGA) at the dam crest increases as the PGA at the foundation bedrock increases, but their ratio gradually decreases. The fundamental period broadly increases with the dam height and PGA at the foundation bedrock. The nonlinear dam response becomes more apparent as the PGA at the foundation bedrock becomes >0.2 g. The prediction models of these correlations are proposed for estimating the seismic response of embankment dams, which can inform the preliminary design stage.

A Method to Directly Estimate S-Wave Site Amplification Factor from Horizontal-to-Vertical Spectral Ratio of Earthquakes (eHVSRs)

2020 ◽  
Vol 110 (6) ◽  
pp. 2892-2911
Author(s):  
Eri Ito ◽  
Kenichi Nakano ◽  
Fumiaki Nagashima ◽  
Hiroshi Kawase
Keyword(s):  
Amplification Factor ◽  
Strong Motion ◽  
Spectral Ratio ◽  
Site Amplification ◽  
Body Waves ◽  
Correction Function ◽  
Site Classification ◽  
Frequency Range ◽  
S Wave ◽  
Site Amplification Factor

ABSTRACT The main purpose of the site classification or velocity determination at a target site is to obtain or estimate the horizontal site amplification factor (HSAF) at that site during future earthquakes because HSAF would have significant effects on the strong-motion characteristics. We have been investigating various kinds of methods to delineate the S-wave velocity structures and the subsequent HSAF, as precisely as possible. After the advent of the diffuse field concept, we have derived a simple formula based on the equipartitioned energy density observed in the layered half-space for incident body waves. In this study, based on the diffuse field concept, together with the generalized spectral inversion technique (GIT), we propose a method to directly estimate the HSAF of the S-wave portion from the horizontal-to-vertical spectral ratio of earthquakes (eHVSRs). Because the vertical amplification is included in the denominator of eHVSR, it cannot be viewed as HSAF without correction. We used GIT to determine both the HSAF and the vertical site amplification factor (VSAF) simultaneously from strong-motion data observed by the networks in Japan and then deduced the log-averaged vertical amplification correction function (VACF) from VSAFs at a total of 1678 sites in which 10 or more earthquakes have been observed. The VACF without a category has a constant amplitude of about 2 in the frequency range from 1 to 15 Hz. By multiplying eHVSR by VACF, we obtained the simulated HSAF. We verified the effectiveness of this correction method using data from observation sites not used in the aforementioned averaging in the frequency range from 0.12 to 15 Hz.

The EUROSEISTEST Strong-Motion Database and Web Portal

2013 ◽  
Vol 84 (5) ◽  
pp. 796-804 ◽  
Author(s):  
K. Pitilakis ◽  
Z. Roumelioti ◽  
D. Raptakis ◽  
M. Manakou ◽  
K. Liakakis ◽  
...  
Keyword(s):  
Strong Motion ◽  
Web Portal ◽  
Strong Motion Database
Sign in / Sign up

Export Citation Format

Share Document