Along-Arc and Back-Arc Attenuation, Site Response, and Source Spectrum for the Intermediate-Depth 8 January 2006 M 6.7 Kythera, Greece, Earthquake

2009 ◽  
Vol 99 (4) ◽  
pp. 2410-2434 ◽  
Author(s):  
D. M. Boore ◽  
A. A. Skarlatoudis ◽  
B. N. Margaris ◽  
C. B. Papazachos ◽  
C. Ventouzi
1992 ◽  
Vol 82 (6) ◽  
pp. 2308-2327
Author(s):  
Stephen H. Hartzell

Abstract Aftershocks of the 1989 Loma Prieta, California, earthquake are used to estimate site response along the San Francisco Peninsula. A total of 215 shear-wave records from 24 sources and 21 sites are used in a linear inversion for source and site response spectra. The methodology makes no assumptions about the shape of the source spectrum. However, to obtain a stable, unique inverse a Q model and geometrical spreading factor are assumed, as well as a constraint on site response that sets the site response averaged over two specific stations to 1.0. Site responses calculated by this formulation of the problem are compared with other studies in the same region that use different methodologies and / or data. The shear-wave site responses compare favorably with estimates based on an ω2-constrained source model. Comparison with coda amplification factors is not as close, but still favorable considering that the coda values were determined for nearby locations with similar geology, and not the same sites. The degree of agreement between the three methods is encouraging considering the very different assumptions and data used.


2018 ◽  
Vol 108 (2) ◽  
pp. 946-965 ◽  
Author(s):  
Ch. Kkallas ◽  
C. B. Papazachos ◽  
B. N. Margaris ◽  
D. Boore ◽  
Ch. Ventouzi ◽  
...  

Abstract We employ the stochastic finite‐fault modeling approach of Motazedian and Atkinson (2005), as adapted by Boore (2009), for the simulation of Fourier amplitude spectra (FAS) of intermediate‐depth earthquakes in the southern Aegean Sea subduction (southern Greece). To calibrate the necessary model parameters of the stochastic finite‐fault method, we used waveform data from both acceleration and broadband‐velocity sensor instruments for intermediate‐depth earthquakes (depths ∼45–140  km) with M 4.5–6.7 that occurred along the southern Aegean Sea Wadati–Benioff zone. The anelastic attenuation parameters employed for the simulations were adapted from recent studies, suggesting large back‐arc to fore‐arc attenuation differences. High‐frequency spectral slopes (kappa values) were constrained from the analysis of a large number of earthquakes from the high‐density EGELADOS (Exploring the Geodynamics of Subducted Lithosphere Using an Amphibian Deployment of Seismographs) temporary network. Because of the lack of site‐specific information, generic site amplification functions available for the Aegean Sea region were adopted. Using the previous source, path, and site‐effect constraints, we solved for the stress‐parameter values by a trial‐and‐error approach, in an attempt to fit the FAS of the available intermediate‐depth earthquake waveforms. Despite the fact that most source, path, and site model parameters are based on independent studies and a single source parameter (stress parameter) is optimized, an excellent comparison between observations and simulations is found for both peak ground acceleration (PGA) and peak ground velocity (PGV), as well as for FAS values. The final stress‐parameter values increase with moment magnitude, reaching large values (>300  bars) for events M≥6.0. Blind tests for an event not used for the model calibration verify the good agreement of the simulated and observed ground motions for both back‐arc and along‐arc stations. The results suggest that the employed approach can be efficiently used for the modeling of large historical intermediate‐depth earthquakes, as well as for seismic hazard assessment for similar intermediate‐depth events in the southern Aegean Sea area.


2019 ◽  
Vol 91 (1) ◽  
pp. 85-93 ◽  
Author(s):  
Michael Everett Mann ◽  
Geoffrey A. Abers

Abstract The 24 January 2016 Iniskin, Alaska earthquake, at Mw 7.1 and 111 km depth, is the largest intermediate‐depth earthquake felt in Alaska, with recorded accelerations reaching 0.2g near Anchorage. Ground motion from the Iniskin earthquake is underpredicted by at least an order of magnitude near Anchorage and the Kenai Peninsula, and is similarly overpredicted in the back‐arc north and west of Cook Inlet. This is in strong contrast to the 30 November 2018 earthquake near Anchorage that was also Mw 7.1 but only 48 km deep. The Anchorage earthquake signals show strong distance decay and are generally well predicted by ground‐motion prediction equations. Smaller intermediate‐depth earthquakes (depth>70  km and 3<M<6.4) with hypocenters near the Iniskin mainshock show similar patterns in ground shaking as the Iniskin earthquake, indicating that the shaking pattern is due to path effects and not the source. The patterns indicate a first‐order role for mantle attenuation in the spatial variability of strong motion. In addition, along‐slab paths appear to be amplified by waveguide effects due to the subduction of crust at >1  Hz; the Anchorage and Kenai regions are particularly susceptible to this amplification due to their fore‐arc position. Both of these effects are absent in the 2018 Anchorage shaking pattern, because that earthquake is shallower and waves largely propagate in the upper‐plate crust. Basin effects are also present locally, but these effects do not explain the first‐order amplitude variations. These analyses show that intermediate‐depth earthquakes can pose a significant shaking hazard, and the pattern of shaking is strongly controlled by mantle structure.


2021 ◽  
pp. 875529302110329
Author(s):  
Elena Florinela Manea ◽  
Carmen Ortanza Cioflan ◽  
Laurentiu Danciu

A newly compiled high-quality ground-shaking dataset of 207 intermediate-depth earthquakes recorded in the Vrancea region of the south-eastern Carpathian mountains in Romania was used to develop region-specific empirical predictive equations for various intensity measures: peak ground acceleration, peak ground velocity, and 5%-damped pseudo-spectral acceleration up to 10 s. Besides common predictor variables (e.g. moment magnitude, depth, hypocentral distance, and site conditions), additional distance scaling parameters were added to describe the specific attenuation pattern observed at the stations located not only on the back and fore but also along the Carpathian arc. In this model, we introduce a proxy measure for the site as the fundamental frequency of resonance to characterize the site response at each recording seismic station beside the soil classes. To additionally reduce the site-to-site variability, a non-ergodic methodology was considered, resulting in a lower standard deviation of about 25%. Statistical evaluation of the newly proposed ground-motion models indicates robust performance compared to regional observations. The model shows significant improvements in describing the spatial variability (at different spectral ordinates), particularly for the fore-arc area of the Carpathians where a deep sedimentary basin is located. Furthermore, the model presented herein improves estimates of ground shaking at longer spectral ordinates (>1 s) in agreement with the observations. The proposed ground-motion models are valid for hypocentral distances less than 500 km, depths over 70 km and within the moment magnitude range of 4.0–7.4.


2020 ◽  
Author(s):  
Harris Kkallas ◽  
Costas Papazachos ◽  
Dominikos Vamvakaris

<p>We have used a stochastic approach to simulate a large number of scenarios for in-slab intermediate-depth earthquakes in the southern Aegean Sea Hellenic subduction region, by applying an extended-source model using the EXSIM code. A large database of synthetic ground motion recordings for events with magnitudes in the range <strong>M</strong>6.0-8.5 has been compiled, covering the whole southern Aegean Benioff zone. For the stochastic simulations, we followed the approach developed in our previous works (Kkallas et al., 2018a,b), where we used the anelastic attenuation from the GMPEs modeling developed by Skarlatoudis et al. (2013) to constrain the different attenuation patterns and properties for the back-arc and fore-arc area. Simulation model parameters, such as stress parameters and attenuation parameters were also adopted from previous works, while for fault parameters we adopted the typical average focal mechanisms proposed by Papazachos et al. (2000), in agreement with the regional subduction tectonics. Estimates of expected ground motion measurements (PGA and PGV values) at different distances from different earthquakes have been employed to generate hybrid Ground-Motion Prediction Equations (GMPE). More specifically, we attempt to modify the existing Ground-Motion Prediction Equations (GMPE) from Skarlatoudis et al. (2013) for intermediate-depth earthquakes along the Hellenic Arc for large magnitude events (<strong>M</strong>>6.5), so that they can be efficiently used for Seismic Hazard assessment, as the original strong-motion dataset used for their development was lacking data in this magnitude range. Peak ground accelerations and velocities predicted by the EXSIM code are generally in very good agreement with the available GMPE results for magnitudes less than <strong>M</strong>7. However, significantly lower ground motions than those predicted by the GMPEs are predicted for large-magnitude events (<strong>M</strong>>7). Using the previous results, we propose a magnitude-dependent correction for the GMPE results both back-arc and along-arc ground motions. Moreover, we demonstrate how the final earthquake ground motion scenarios, as well as the modified GMPEs affect both deterministic and probabilistic seismic hazard analysis. This work has been partly supported by the HELPOS (MIS 5002697) project.</p>


Sign in / Sign up

Export Citation Format

Share Document