The Effect of Torsional Ground Motion on Structural Response: Code Recommendation for Accidental Eccentricity

2009 ◽  
Vol 99 (2B) ◽  
pp. 1261-1270 ◽  
Author(s):  
M. R. Ghayamghamian ◽  
G. R. Nouri ◽  
H. Igel ◽  
T. Tobita
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Response Code ◽  
Accidental Eccentricity ◽  
Torsional Ground Motion

scholarly journals Seismic torsional effects on buildings

1976 ◽  
Vol 9 (1) ◽  
pp. 79-83 ◽  
Author(s):  
D. G. Elms
Keyword(s):  
New Zealand ◽  
Ground Motion ◽  
Building Structures ◽  
The Third ◽  
Accidental Eccentricity ◽  
Parabolic Function ◽  
Torsional Ground Motion

This paper gives the background to the seismic torsional provisions of the New Zealand Loadings Code. These provisions attempt to deal with three effects: accidental eccentricity, torsional ground motion, and coupling between torsional and translational modes. The first two effects lead to an effective eccentricity of one-tenth of the width of a building, while the third leads to a parabolic function of the calculated eccentricity: this was obtained by applying existing results for torsional amplification to a number of typical building structures.

scholarly journals Effect of Frequency Characteristics of Ground Motion on Response of Tuned Mass Damper Controlled Inelastic Concrete Frame

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 74
Author(s):  
Md Motiur Rahman ◽  
Tahmina Tasnim Nahar ◽  
Dookie Kim
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Tuned Mass Damper ◽  
Frequency Characteristics ◽  
Building Frames ◽  
Concrete Frame ◽  
Finite Element Software ◽  
Mass Damper ◽  
Lateral Displacements ◽  
Modal Mass

This paper investigates the performance of tuned mass damper (TMD) and dynamic behavior of TMD-controlled concrete structure considering the ground motion (GM) characteristics based on frequency content. The effectiveness of TMD in reducing the structural response and probability of collapse of the building frames are affected by the frequency characteristics of GMs. To attenuate the seismic vibration of the buildings, the TMD controlled building has been designed based on the modal analysis (modal frequencies and modal mass participation ratio). In this study, to investigate the performance of TMD, four different heights (i.e., 3, 5, 10, 20 stories) inelastic concrete moment-resisting frames equipped with TMDs are developed using an open-source finite element software. A series of numerical analyses have been conducted using sixty earthquakes classified into three categories corresponding to low, medium, and high-frequency characteristics of GMs. To evaluate the proposed strategy, peak lateral displacements, inter-story drift, and the probability of collapse using fragility analysis have been investigated through the structures equipped with and without TMD. The results appraise the effect of TMD and compare the seismic responses of earthquake frequency contents and the vibration control system of the inelastic building frames.

scholarly journals An approach to quantify the influence of ground motion uncertainty on elastoplastic system acceleration in incremental dynamic analysis

2017 ◽  
Vol 20 (11) ◽  
pp. 1744-1756 ◽  
Author(s):  
Peng Deng ◽  
Shiling Pei ◽  
John W. van de Lindt ◽  
Hongyan Liu ◽  
Chao Zhang
Keyword(s):  
Dynamic Analysis ◽  
Ground Motion ◽  
Earthquake Engineering ◽  
Structural Response ◽  
Incremental Dynamic Analysis ◽  
Degree Of Freedom ◽  
Maximum Acceleration ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Performance Based Earthquake Engineering

Inclusion of ground motion–induced uncertainty in structural response evaluation is an essential component for performance-based earthquake engineering. In current practice, ground motion uncertainty is often represented in performance-based earthquake engineering analysis empirically through the use of one or more ground motion suites. How to quantitatively characterize ground motion–induced structural response uncertainty propagation at different seismic hazard levels has not been thoroughly studied to date. In this study, a procedure to quantify the influence of ground motion uncertainty on elastoplastic single-degree-of-freedom acceleration responses in an incremental dynamic analysis is proposed. By modeling the shape of the incremental dynamic analysis curves, the formula to calculate uncertainty in maximum acceleration responses of linear systems and elastoplastic single-degree-of-freedom systems is constructed. This closed-form calculation provided a quantitative way to establish statistical equivalency for different ground motion suites with regard to acceleration response in these simple systems. This equivalence was validated through a numerical experiment, in which an equivalent ground motion suite for an existing ground motion suite was constructed and shown to yield statistically similar acceleration responses to that of the existing ground motion suite at all intensity levels.

scholarly journals A Multi-Objective Ground Motion Selection Approach Matching the Acceleration and Displacement Response Spectra

2018 ◽  
Vol 10 (12) ◽  
pp. 4659 ◽  
Author(s):  
Yabin Chen ◽  
Longjun Xu ◽  
Xingji Zhu ◽  
Hao Liu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Structural Response ◽  
Response Spectra ◽  
Computationally Efficient ◽  
Ground Motion Selection ◽  
Displacement Response ◽  
Rc Frames ◽  
Selection Approach ◽  
Displacement Response Spectra

For seismic resilience-based design (RBD), a selection of recorded time histories for dynamic structural analysis is usually required. In order to make individual structures and communities regain their target functions as promptly as possible, uncertainty of the structural response estimates is in great need of reduction. The ground motion (GM) selection based on a single target response spectrum, such as acceleration or displacement response spectrum, would bias structural response estimates leading significant uncertainty, even though response spectrum variance is taken into account. In addition, resilience of an individual structure is not governed by its own performance, but depends severely on the performance of other systems in the same community. Thus, evaluation of resilience of a community using records matching target spectrum at whole periods would be reasonable because the fundamental periods of systems in the community may be varied. This paper presents a GM selection approach based on a probabilistic framework to find an optimal set of records to match multiple target spectra, including acceleration and displacement response spectra. Two major steps are included in that framework. Generation of multiple sub-spectra from target displacement response spectrum for selecting sets of GMs was proposed as the first step. Likewise, the process as genetic algorithm (GA), evolvement of individuals previously generated, is the second step, rather than using crossover and mutation techniques. A novel technique improving the match between acceleration response spectra of samples and targets is proposed as the second evolvement step. It is proved computationally efficient for the proposed algorithm by comparing with two developed GM selection algorithms. Finally, the proposed algorithm is applied to select GM records according to seismic codes for analysis of four archetype reinforced concrete (RC) frames aiming to evaluate the influence of GM selection considering two design response spectra on structural responses. The implications of design response spectra especially the displacement response spectrum and GM selection algorithm are summarized.

Coupled torsional dynamic analysis of a multistory building

1973 ◽  
Vol 63 (3) ◽  
pp. 1025-1039
Author(s):  
Bruce M. Douglas ◽  
Thomas E. Trabert
Keyword(s):  
Ground Motion ◽  
Degrees Of Freedom ◽  
Seismic Waves ◽  
Structural Response ◽  
Tall Buildings ◽  
Strong Motion ◽  
Ambient Vibration ◽  
Simultaneous Application ◽  
Vibration Data ◽  
Horizontal Ground Motion

abstract The coupled bending and torsional vibrations of a relatively symmetric 22-story reinforced concrete building in Reno, Nevada are studied. Analytical results are compared with observations obtained during the nuclear explosion FAULTLESS and to ambient vibration data. The fundamental periods of vibration observed during FAULTLESS were (TNS = 1.42, TEW = 1.81, TTORSION = 1.12 sec), and the calculated periods were (TNS = 2.14, TEW = 2.07, TTORSION = 1.90 sec). It was estimated that between 25 and 45 per cent of the total available nonstructural stiffness was required to explain the differences in the observed and calculated fundamental periods. Each floor diaphragm in the system was allowed three degrees of freedom-two translations and a rotation. It was found that coupled torsional motions can influence the response of structural elements near the periphery of the structure. Strong-motion structural response calculations comparing the simultaneous use of both components of horizontal ground motion to a single component analysis showed that the simultaneous application of both components of ground motion can significantly alter the response of lateral load-carrying elements. Differences of the order of 45 per cent were observed in the frames near the ends of the structure. Also, it was shown that the overall response of tall buildings is sensitive not only to the choice of input ground motion but also to the orientation of the structure with respect to the seismic waves.

Sign in / Sign up

Export Citation Format

Share Document