scholarly journals Characteristic features of lysocim influence on growth kinetics of candida albicans fungi

2019 ◽  
Vol 36 (3) ◽  
pp. 67-71
Author(s):  
Anatoliy P. Godovalov ◽  
Danila M. Pastukhov
Keyword(s):  
Candida Albicans ◽  
Growth Kinetics ◽  
Nutrient Medium ◽  
Proliferative Activity ◽  
Stationary Phases ◽  
Optic Density ◽  
Characteristic Features ◽  
Kinetics Of

Aim.To assess the growth kinetics and biofilm-forming activity of Candida albicans strains when cultivated in nutrient medium with different concentrations of lysocim. Materials and methods. Growth kinetics of strains was determined by changes in optic density of suspension at 620 nm, and biofilms detected them by their staining with fuchsin. The results were registered on photometer. Results.Lysocim changes the growth kinetics of C. albicans, reducing the duration of exponential and prolonging the stationary phases of growth. It was established that increased lysocim concentration positively influences the proliferative activity of the fungi. As lysocim concentration is increased, C. albicans biofilm-forming activity is elevating. Conclusions. Thus, the increased level of lysocim contributes to transition of fungi into the plankton form of growth that should be taken into consideration when treating patients with candidiasis.

Architectural analysis, viability assessment and growth kinetics of Candida albicans and Candida glabrata biofilms

2009 ◽  
Vol 54 (11) ◽  
pp. 1052-1060 ◽  
Author(s):  
C.J. Seneviratne ◽  
W.J. Silva ◽  
L.J. Jin ◽  
Y.H. Samaranayake ◽  
L.P. Samaranayake
Keyword(s):  
Candida Albicans ◽  
Growth Kinetics ◽  
Candida Glabrata ◽  
Viability Assessment ◽  
Architectural Analysis ◽  
Kinetics Of

The Ordered Phase Formation in Ti-Al-Ga Alloys

1970 ◽  
Vol 28 ◽  
pp. 440-441
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Titanium Alloys ◽  
Growth Kinetics ◽  
Stoichiometric Composition ◽  
Good Potential ◽  
Alpha Titanium ◽  
Cold Rolled ◽  
Kinetics Of ◽  
Thermal Stability Of

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization

Growth Kinetics of Quantum Size ZnO Particles

1998 ◽  
Vol 536 ◽  
Author(s):  
E. M. Wong ◽  
J. E. Bonevich ◽  
P. C. Searson
Keyword(s):  
Growth Kinetics ◽  
Ostwald Ripening ◽  
Chemical Potential ◽  
Colloidal Suspensions ◽  
Green Emission ◽  
Blue Shift ◽  
Constant Current ◽  
Mass Model ◽  
Zno Particles ◽  
Kinetics Of

AbstractColloidal chemistry techniques were used to synthesize ZnO particles in the nanometer size regime. The particle aging kinetics were determined by monitoring the optical band edge absorption and using the effective mass model to approximate the particle size as a function of time. We show that the growth kinetics of the ZnO particles follow the Lifshitz, Slyozov, Wagner theory for Ostwald ripening. In this model, the higher curvature and hence chemical potential of smaller particles provides a driving force for dissolution. The larger particles continue to grow by diffusion limited transport of species dissolved in solution. Thin films were fabricated by constant current electrophoretic deposition (EPD) of the ZnO quantum particles from these colloidal suspensions. All the films exhibited a blue shift relative to the characteristic green emission associated with bulk ZnO. The optical characteristics of the particles in the colloidal suspensions were found to translate to the films.

Growth kinetics of boride layers formed on GGG 40.3 ductile iron

2016 ◽  
Vol 58 (5) ◽  
pp. 418-421
Author(s):  
Fatma Ünal ◽  
Ahmet Topuz
Keyword(s):  
Growth Kinetics ◽  
Ductile Iron ◽  
Kinetics Of

scholarly journals Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition

RSC Advances ◽  
2021 ◽  
Vol 11 (30) ◽  
pp. 18493-18499
Author(s):  
Sergio Sánchez-Martín ◽  
S. M. Olaizola ◽  
E. Castaño ◽  
E. Urionabarrenetxea ◽  
G. G. Mandayo ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Growth Kinetics ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Kinetics Analysis ◽  
Deposition Parameters ◽  
Kinetics Of

Impact of deposition parameters, microstructure and growth kinetics analysis of ZnO grown by Aerosol-assisted Chemical Vapor Deposition (AACVD).

scholarly journals Morphology, energetics and growth kinetics of diphenylalanine fibres

2021 ◽  
Author(s):  
Phillip Mark Rodger ◽  
Caroline Montgomery ◽  
Giovanni Costantini ◽  
Alison Rodger
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulations ◽  
Growth Kinetics ◽  
Dynamics Simulations ◽  
Kinetics Of

The formation and stability of diphenylalanine fibres are studied by combining molecular dynamics simulations with microscopy and spectroscopy experiments, quantitatively detailing their morphology, energetics and growth kinetics.

scholarly journals Kinetics of the Boride Layers Obtained on AISI 1018 Steel by Considering the Amount of Matter Involved

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 259 ◽  
Author(s):  
Pablo A. Ruiz-Trabolsi ◽  
Julio Cesar Velázquez ◽  
Carlos Orozco-Álvarez ◽  
Rafael Carrera-Espinoza ◽  
Jorge A. Yescas-Hernández ◽  
...  
Keyword(s):  
Sample Size ◽  
Growth Kinetics ◽  
Duration Of Treatment ◽  
Solid Diffusion ◽  
Treatment Conditions ◽  
Wear And Corrosion ◽  
Different Diameters ◽  
Boriding Process ◽  
Kinetics Of ◽  
Cylindrical Samples

Boride layers are typically used to combat the wear and corrosion of metals. For this reason, to improve our knowledge of the boriding process, this research studied the effect of the size of the treated material on the kinetics of the growth of the boride layers obtained during a solid diffusion process. The purpose was to elucidate how the layers’ growth kinetics could be affected by the size of the samples since, as the amount of matter increases, the amount of energy necessary to make the process occur also increases. Furthermore, the level of activation energy seems to change as a function of the sample size, although it is considered an intrinsic parameter of each material. Six cylindrical samples with different diameters were exposed to the boriding process for three different exposure times (1.5, 3, and 5 h). The treatment temperatures used were 900, 950, and 1000 °C for each size and duration of treatment. The results show that the layer thickness increased not only as a function of the treatment conditions but also as a function of the sample diameter. The influence of the sample size on the growth kinetics of the boride layers is clear, because the growth rate increased even though the treatment conditions (time and temperature) remained constant.

Growth kinetics of N-face polarity GaN by plasma-assisted molecular-beam epitaxy

2004 ◽  
Vol 84 (18) ◽  
pp. 3684-3686 ◽  
Author(s):  
E. Monroy ◽  
E. Sarigiannidou ◽  
F. Fossard ◽  
N. Gogneau ◽  
E. Bellet-Amalric ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Growth Kinetics ◽  
Molecular Beam ◽  
Kinetics Of
Sign in / Sign up

Export Citation Format

Share Document