Decellularized matrix of the small intestine. Technology for obtaining, evaluating and using directions

2020 ◽  
Vol 22 (4) ◽  
pp. 87-90
Author(s):  
A. A. Kokorina ◽  
S. V. Kromsky ◽  
A. V. Kriventsov ◽  
E. V. Mikhailova ◽  
N. V. Pak ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Small Intestine ◽  
Ex Vivo ◽  
Matrix Material ◽  
Tissue Scaffold ◽  
The Matrix ◽  
Organ Tissue ◽  
Exogenous Origin ◽  
Bioresorbable Material ◽  
Technology Matrix

Matrix (scaffold, matrix, framework, template) is a bioresorbable or non-bioresorbable material that can be filled with stem or somatic cells in/ex vivo in order to obtain a tissue-engineering structure for restoration of a lost organ, part of an organ, tissue. Scaffold must be to the extent necessary strong, non-immunogenic, bioactive. The porosity of the matrix must be open, the surface is rough and, most importantly, the matrix must contain factors of chemotaxis of endo- or exogenous origin, cell adhesion of their proliferation, differentiation. In this context, on the example of creating a decellularized small intestine matrix, a number of fundamental issues are highlighted regarding the choice of matrix material, its production technology, matrix evaluation in accordance with the criteria that correspond to the matrix for tissue engineering, and possible directions for its use. As a result, a non-immunogenic extracellular matrix of the small intestine was obtained by the method of detergent-enzymatic perfusion decellularization, which was sufficient in characteristics for use in various areas of tissue engineering, including plasty of defects of the skin, mucous membranes, small intestine, etc.

The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids

2015 ◽  
Vol 22 (5) ◽  
pp. 969-987 ◽  
Author(s):  
Ivan Giorgio ◽  
Ugo Andreaus ◽  
Tomasz Lekszycki ◽  
Alessandro Della Corte
Keyword(s):  
Bone Growth ◽  
Matrix Material ◽  
Porous Solids ◽  
Artificial Material ◽  
Matrix Deposition ◽  
Aspect Ratios ◽  
Adopted Model ◽  
The Matrix ◽  
Bioresorbable Material

Since internal architecture greatly influences crucial factors for tissue regeneration, such as nutrient diffusion, cell adhesion and matrix deposition, scaffolds have to be carefully designed, keeping in mind case-specific mechanical, mass transport and biological requirements. However, customizing scaffold architecture to better suit conflicting requirements, such as biological and mechanical ones, remains a challenging issue. Recent advances in printing technologies, together with the synthesis of novel composite biomaterials, have enabled the fabrication of various scaffolds with defined shape and controlled in vitro behavior. Thus, the influence of different geometries of the assemblage of the matrix and scaffold on the remodeling processes of living bone and artificial material should be investigated. To this end, two implant shapes are considered in this paper, namely a circular inclusion and a rectangular groove of different aspect ratios. A model of a mixture of bone tissue and bioresorbable material with voids was used to numerically analyze the physiological balance between the processes of bone growth and resorption and artificial material resorption in a plate-like sample. The adopted model was derived from a theory for the behavior of porous solids in which the matrix material is elastic and the interstices are void of material.

Preparation of Nano Electrospinning Covered Stent and Its Application in the Treatment of Intracranial Aneurysm with CT Diagnosis

2021 ◽  
Vol 13 (8) ◽  
pp. 1584-1593
Author(s):  
Yulong Wang ◽  
Shuiting Zhai ◽  
Jianwu Xing ◽  
Yingkun He ◽  
Tianxiao Li
Keyword(s):  
Tissue Engineering ◽  
Intracranial Aneurysm ◽  
Matrix Material ◽  
Core Layer ◽  
Covered Stent ◽  
Tissue Engineering Scaffolds ◽  
Structural Support ◽  
Covering Layer ◽  
The Matrix

In the process of tissue regeneration or organ reconstruction, tissue engineering scaffolds provide strong structural support for the function of seed cells, which enables tissue engineering technology to be implemented. In the treatment of intracranial aneurysm, from the perspective of endovascular treatment, the emulsion electro-spinning method is used and the lactic acid caprolactone copolymer is taken as the matrix material to design a kind of vascular arterial stent with heparin loaded nanofibers as a film covering layer. SEM confirms that the stent has a good nanofiber structure, and TEM suggests that the core layer containing fluorescein is evenly distributed around the stent. Fourier transform infrared reflection (FTIR) shows that heparin is successfully loaded into the stent. WCA test indicates that heparin loading can improve the hydrophilicity of stent. In vitro biocompatibility/hemocompatibility test shows that the stent has good compatibility, but inhibits the proliferation of L929 and PIEC cells. With the stent as the film covering layer, the heparin loaded nanofiber stent for small vascular aneurysms successfully prepared has achieved good results in the treatment of intracranial aneurysm. CT imaging of patients treated with vascular arterial stent shows that heparin in tumor site degrades with time, which makes CT signal in mice change with time. At the same time, aneurysms gradually disappear with the implantation of covered stent. After implantation 30 d, the blood vessels of the implanted site are unobstructed and no thrombus appears.

Polishing process effect on the image of dispersed precipitates

1984 ◽  
Vol 42 ◽  
pp. 534-535
Author(s):  
C.T. Hu ◽  
C.W. Allen
Keyword(s):  
Matrix Material ◽  
Specimen Preparation ◽  
Second Phase ◽  
Precipitate Particle ◽  
Polishing Process ◽  
Second Phase Particles ◽  
The Matrix ◽  
Surface Profiles ◽  
Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

Application of cross correlation to HREM images of surfaces

1987 ◽  
Vol 45 ◽  
pp. 754-755
Author(s):  
D. E. Luzzi ◽  
L. D. Marks ◽  
M. I. Buckett
Keyword(s):  
Cross Correlation ◽  
A Priori ◽  
Matrix Material ◽  
Correlation Method ◽  
Accurate Knowledge ◽  
Complex Image ◽  
Fourier Filtering ◽  
The Matrix ◽  
Low Pass ◽  
Data Reduction Technique

As the HREM becomes increasingly used for the study of dynamic localized phenomena, the development of techniques to recover the desired information from a real image is important. Often, the important features are not strongly scattering in comparison to the matrix material in addition to being masked by statistical and amorphous noise. The desired information will usually involve the accurate knowledge of the position and intensity of the contrast. In order to decipher the desired information from a complex image, cross-correlation (xcf) techniques can be utilized. Unlike other image processing methods which rely on data massaging (e.g. high/low pass filtering or Fourier filtering), the cross-correlation method is a rigorous data reduction technique with no a priori assumptions.We have examined basic cross-correlation procedures using images of discrete gaussian peaks and have developed an iterative procedure to greatly enhance the capabilities of these techniques when the contrast from the peaks overlap.

Porcine small intestine, a good ex vivo model to investigate absorption and metabolism of natural products

2017 ◽  
Author(s):  
J Houriet ◽  
YE Arnold ◽  
C Petit ◽  
YN Kalia ◽  
JL Wolfender
Keyword(s):  
Natural Products ◽  
Small Intestine ◽  
Ex Vivo ◽  
Ex Vivo Model

Impact Strength, Flexural Modulus and Wear Rate of PMMA Composites Reinforced by Eggshell Powders

2020 ◽  
Vol 38 (7A) ◽  
pp. 960-966
Author(s):  
Aseel M. Abdullah ◽  
Hussein Jaber ◽  
Hanaa A. Al-Kaisy
Keyword(s):  
Impact Strength ◽  
Wear Rate ◽  
Flexural Modulus ◽  
Matrix Material ◽  
Weight Fraction ◽  
Pure Pmma ◽  
Calcination Process ◽  
The Matrix ◽  
The Impact ◽  
Interface Bond

In the present study, the impact strength, flexural modulus, and wear rate of poly methyl methacrylate (PMMA) with eggshell powder (ESP) composites have been investigated. The PMMA used as a matrix material reinforced with ESP at two different states (including untreated eggshell powder (UTESP) and treated eggshell powder (TESP)). Both UTESP and TESP were mixed with PMMA at different weight fractions ranged from (1-5) wt.%. The results revealed that the mechanical properties of the PMMA/ESP composites were enhanced steadily with increasing eggshell contents. The samples with 5 wt.% of UTESP and TESP additions give the maximum values of impact strength, about twice the value of the pure PMMA sample. The calcination process of eggshells powders gives better properties of the PMMA samples compared with the UTESP at the same weight fraction due to improvements in the interface bond between the matrix and particles. The wear characteristics of the PMMA composites decrease by about 57% with increases the weight fraction of TESP up to 5 wt.%. The flexural modulus values are slightly enhanced by increasing of the ESP contents in the PMMA composites.

scholarly journals Self-Reinforced Nylon 6 Composite for Smart Vibration Damping

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1235
Author(s):  
Bidita Salahuddin ◽  
Rahim Mutlu ◽  
Tajwar A. Baigh ◽  
Mohammed N. Alghamdi ◽  
Shazed Aziz
Keyword(s):  
Matrix Material ◽  
Nylon 6 ◽  
Vibration Damping ◽  
Vibration Energy ◽  
Damping Factor ◽  
Passive Vibration Control ◽  
Reinforced Composite ◽  
Coiled Structure ◽  
The Matrix ◽  
3D Printed

Passive vibration control using polymer composites has been extensively investigated by the engineering community. In this paper, a new kind of vibration dampening polymer composite was developed where oriented nylon 6 fibres were used as the reinforcement, and 3D printed unoriented nylon 6 was used as the matrix material. The shape of the reinforcing fibres was modified to a coiled structure which transformed the fibres into a smart thermoresponsive actuator. This novel self-reinforced composite was of high mechanical robustness and its efficacy was demonstrated as an active dampening system for oscillatory vibration of a heated vibrating system. The blocking force generated within the reinforcing coiled actuator was responsible for dissipating vibration energy and increase the magnitude of the damping factor compared to samples made of non-reinforced nylon 6. Further study shows that the appropriate annealing of coiled actuators provides an enhanced dampening capability to the composite structure. The extent of crystallinity of the reinforcing actuators is found to directly influence the vibration dampening capacity.

scholarly journals Macroporous chitosan/methoxypoly(ethylene glycol) based cryosponges with unique morphology for tissue engineering applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Pradeep Kumar ◽  
Viness Pillay ◽  
Yahya E. Choonara
Keyword(s):  
Tissue Engineering ◽  
Polymer Network ◽  
Three Dimensional ◽  
Hysteresis Loops ◽  
Interpenetrating Polymer Network ◽  
Morphological Data ◽  
Porous Scaffolds ◽  
Morphological Variations ◽  
Molecular Stability ◽  
The Matrix

AbstractThree-dimensional porous scaffolds are widely employed in tissue engineering and regenerative medicine for their ability to carry bioactives and cells; and for their platform properties to allow for bridging-the-gap within an injured tissue. This study describes the effect of various methoxypolyethylene glycol (mPEG) derivatives (mPEG (-OCH3 functionality), mPEG-aldehyde (mPEG-CHO) and mPEG-acetic acid (mPEG-COOH)) on the morphology and physical properties of chemically crosslinked, semi-interpenetrating polymer network (IPN), chitosan (CHT)/mPEG blend cryosponges. Physicochemical and molecular characterization revealed that the –CHO and –COOH functional groups in mPEG derivatives interacted with the –NH2 functionality of the chitosan chain. The distinguishing feature of the cryosponges was their unique morphological features such as fringe thread-, pebble-, curved quartz crystal-, crystal flower-; and canyon-like structures. The morphological data was well corroborated by the image processing data and physisorption curves corresponding to Type II isotherm with open hysteresis loops. Functionalization of mPEG had no evident influence on the macro-mechanical properties of the cryosponges but increased the matrix strength as determined by the rheomechanical analyses. The cryosponges were able to deliver bioactives (dexamethasone and curcumin) over 10 days, showed varied matrix degradation profiles, and supported neuronal cells on the matrix surface. In addition, in silico simulations confirmed the compatibility and molecular stability of the CHT/mPEG blend compositions. In conclusion, the study confirmed that significant morphological variations may be induced by minimal functionalization and crosslinking of biomaterials.

Sign in / Sign up

Export Citation Format

Share Document