About the response of fractal structures of fluid-saturated reservoir rocks under the wave impact on them

Author(s):  
G. S. Dubinsky
2003 ◽  
Author(s):  
F. Aporti ◽  
F. Ferro-Milone ◽  
A. Cananzi ◽  
T. A. Minelli ◽  
V. Nofrate ◽  
...  

2012 ◽  
Vol 57 (3) ◽  
pp. 601-618 ◽  
Author(s):  
Vasyl Moisyshyn ◽  
Vasyl Yacyshyn ◽  
Oleg Vytyaz

Abstract Studied here are the results of the asymmetric problem solution of the thick walled circular cylinder elasticity using the spatial characteristics technique. The practical implementation of the solution of the problem is based on the calculation of the stress-caused deformation state of the stuck drilling string zone affected by the explosion wave action upon the inner wall of the pipe. Suggested here is the technique for determining axual σz and circular σθ stress on the drill pipe wall as well as the radial displacements ur of the stuck drill pipe outer surface under the action of the explosion shock wave. The above technique enables to make a sound selection of the cylindrical explosive charge weight in order to avoid the residual strain during the drilling string shaping off and uncoupling the threaded joints or to prevent them from exceeding the admissible level.


Author(s):  
S.R. Bembel ◽  
◽  
V.M. Aleksandrov ◽  
A.A. Ponomarev ◽  
P.V. Markov ◽  
...  

1988 ◽  
Vol 43 (4) ◽  
pp. 533-543 ◽  
Author(s):  
G. Chauveteau ◽  
J. Lecourtier ◽  
L. T. Lee

Author(s):  
Liang-Yee Cheng ◽  
Rubens Augusto Amaro Junior

Author(s):  
Dmitry Korzinin ◽  
Dmitry Korzinin ◽  
Igor Leontiev ◽  
Igor Leontiev

Modelling study of the equilibrium profiles formed on sandy coasts of different bed slopes and grain sizes under the various wave conditions was realized by using the CROSS-P and Xbeach morphodynamic models. A special criterion taking into account a total volume of bed deformations per one hour was suggested to determine the conditions of profile stabilization. For both models the time scales of equilibrium profile formation were found to be the same. However, the deformation magnitudes differed significantly. Bed deformations were computed on the whole profile length over the 200-hours duration of wave impact. It was concluded that both models predict a trend of the bed slope toward a stable value. CROSS-P model shows the widening of accumulative terrace during the profile evolution. The mean slope of the equilibrium profile was found to depend on the initial bed slope.


2017 ◽  
Vol 54 (4) ◽  
pp. 227-264
Author(s):  
Ronald Johnson ◽  
Justin Birdwell ◽  
Paul Lillis

To better understand oil and bitumen generation and migration in the Paleogene lacustrine source rocks of the Uinta Basin, Utah, analyses of 182 oil samples and tar-impregnated intervals from 82 core holes were incorporated into a well-established stratigraphic framework for the basin. The oil samples are from the U.S. Geological Survey Energy Resources Program Geochemistry Laboratory Database; the tar-impregnated intervals are from core holes drilled at the Sunnyside and P.R. Spring-Hill Creek tar sands deposits. The stratigraphic framework includes transgressive and regressive phases of the early freshwater to near freshwater lacustrine interval of Lake Uinta and the rich and lean zone architecture developed for the later brackish-to-hypersaline stages of the lake. Two types of lacustrine-sourced oil are currently recognized in the Uinta Basin: (1) Green River A oils, with high wax and low β-carotane contents thought to be generated by source rocks in the fresh-to-brackish water lacustrine interval, and (2) much less common Green River B oils, an immature asphaltic oil with high β-carotane content thought to be generated by marginally mature to mature source rocks in the hypersaline lacustrine interval. Almost all oil samples from reservoir rocks in the fresh-to-brackish water interval are Green River A oils; however four samples of Green River A oils were present in the hypersaline interval, which likely indicates vertical migration. In addition, two samples of Green River B oil are from intervals that were assumed to contain only Green River A oil. Tar sand at the P.R. Spring-Hill Creek deposit are restricted to marginal lacustrine and fluvial sandstones deposited during the hypersaline phase of Lake Uinta, suggesting a genetic relationship to Green River B oils. Tar sand at the Sunnyside deposit, in contrast, occur in marginal lacustrine and alluvial sandstones deposited from the early fresh to nearly freshwater phase of Lake Uinta through the hypersaline phase. The Sunnyside deposit occurs in an area with structural dips that range from 7 to 14 degrees, and it is possible that some tar migrated stratigraphically down section.


Sign in / Sign up

Export Citation Format

Share Document