scholarly journals Pyrolysis of wild cyanophyta from Chaohu lake for bio-oil

Author(s):  
Jun Chen ◽  
Juan Ci ◽  
Xin Lai Wei ◽  
Zhi Min Yu ◽  
Jie Jin

<p>To solve the environmental problems caused by the algae, pyrolysis experiment was studied to produce bio-oil with the wild cyanophyta from Chaohu lake for the first time. The results showed that the suitable temperature, carrier gas flow rate, and the smaller particle size were better for liquid products generation, the liquid (bio-oil) yield obtained maximum (66 %) at temperature of 450 <sup>o</sup>C, carried gas flow rate of 50 mL/min and particle size of less than 0.25 mm. The main ingredients of liquid product from cyanophyta pyrolysis consisted of hydrocarbons, nitrogenous compounds, acids and other organic compounds (such as alcohols, phenols esters and non-identified materials). Acid content was the highest and greatly affected by temperature. The content of hydrocarbons was about 15%.</p>

2016 ◽  
Vol 18 (3) ◽  
pp. 88-96 ◽  
Author(s):  
Najaf Ali ◽  
Mahmood Saleem ◽  
Khurram Shahzad ◽  
Sadiq Hussain ◽  
Arshad Chughtai

Abstract The yield and composition of pyrolysis products depend on the characteristics of feed stock and process operating parameters. Effect of particle size, reaction temperature and carrier gas flow rate on the yield of bio-oil from fast pyrolysis of Pakistani maize stalk was investigated. Pyrolysis experiments were performed at temperature range of 360-540°C, feed particle size of 1-2 mm and carrier gas fl ow rate of 7.0-13.0 m3/h (0.61.1 m/s superficial velocity). Bio-oil yield increased with the increase of temperature followed by a decreasing trend. The maximum yield of bio-oil obtained was 42 wt% at a temperature of 490°C with the particle size of around 1.0 mm and carrier gas flow rate of 11.0 m3/h (0.9 m/s superficial velocity). High temperatures resulted in the higher ratios of char and non-condensable gas.


EKUILIBIUM ◽  
2011 ◽  
Vol 10 (1) ◽  
Author(s):  
Arif Jumari ◽  
Agus Purwanto ◽  
Sperisa Distantina

<p><strong><em>Abstract: </em></strong><em>Biodiesel is a very potential alternative energy resources. Producing of Biodiesel was much carried out using homogeneous catalytic esterification of vegetable oil and alcohol. These proces had many disanvantages. ZnO as a transesterification catalyst has given high yield. To improve the catalytic performance, the surface area per mas of catalyst must be increased by decreasing the size of particle. To ease the separation between product and catalyst, the magnetic  behaviour should be added to the catalyst. The aim of the research were to obtain nanocomposite ZnO/Fe<sub>2</sub>O<sub>3</sub> and determine physical characteristic as well as catalytic and separation performance. Nanocomposite ZnO/Fe<sub>2</sub>O<sub>3</sub> was synthesized by flame spray pyrolysis method. Assisted by carrier air precursor solution of Zn(NO<sub>3</sub>)<sub>2</sub> and Fe(NO<sub>3</sub>)<sub>3</sub> was nebulized and flowed to the inner tube of the burner. Nebulasation was carried out by varying carrier gas flow rate but  at constant rateof nebulization. LPG gas dan oxidant air  were flowed to the inner annulus  and outer annulus, respectively. The solid produced was separated from gas by particle filter. The solid particle was then examined by XRD , FE-SEM and BET as wel as catalytic performance. The result showed that the crystalinity of samples decreased by increasing the carrier gas flow rate. The particle size was not influenced by carrier gas flow rate and the size were dominantly between 50-100 nm. A part of particle was flowerlike particle.  The specific surface area  of particle was not inflenced by carrier gas flow rate and its value was 50.5 m<sup>2</sup>/gram.</em></p><p><em> </em><strong><em>Keywords</em></strong><em> : Tran-esterification,  nanocomposite ZnO/Fe<sub>2</sub>O<sub>3</sub>,  flame spray pyrolysis,   carrier gas, particle size,  particle morphology, specific surface area </em></p>


2011 ◽  
Vol 328-330 ◽  
pp. 881-886 ◽  
Author(s):  
Shou Yin Yang ◽  
Chih Yung Wu ◽  
Kun Ho Chen

Rice straw is one of the main renewable energy sources in central and south Taiwan. In this study, bio-oil was produced from rice straw using a bench-scale plant that included a fluidized bed, a char removal system, and an oil collection system using an oil-recycling spray condenser. We investigated the effects of pyrolysis temperature and carrier gas flow rate on the distribution of products and on the properties of the bio-oil obtained. Experiments were conducted at reactor temperatures of 350–500 °C with carrier gas flow rates of 7.5–15 L/min and a feed rate of 1 kg/h. The results indicated that the optimum reaction temperature and carrier gas flow rate for the production of bio-oil were 450 °C and 10 L/min, respectively. The highest percentage of bio-oil in the products in these experiments was 41.3 wt%. The pH value of the bio-oil was ~4.1 and the viscosity was ~9 cSt (at 25 °C), depending on the storage time, temperature, and char content. This study establishes the operating parameters of a biomass fast pyrolysis system and provides some properties of rice straw bio-oil relevant to storage and use.


Evergreen ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 149-156 ◽  
Author(s):  
Dijan Supramono ◽  
Eliza Habna Lana ◽  
Setiadi ◽  
Mohammad Nasikin

2013 ◽  
Vol 39 (3) ◽  
pp. 258-261 ◽  
Author(s):  
A. G. Kurenya ◽  
D. V. Gorodetskiy ◽  
V. E. Arkhipov ◽  
A. V. Okotrub

2015 ◽  
Vol 430 ◽  
pp. 87-92 ◽  
Author(s):  
Ming Li ◽  
Jingyun Wang ◽  
Kan Li ◽  
Yingjie Xing ◽  
H.Q. Xu

1998 ◽  
Vol 12 (1) ◽  
Author(s):  
Satoru Tanaka ◽  
Hideaki Tsuchida ◽  
Hajime Sonoda ◽  
Akiyoshi Namiki

Sign in / Sign up

Export Citation Format

Share Document