Delineation of Halophytic Mangroves and Associated Species Using Morphological and Anatomical Characteristics

2017 ◽  
Keyword(s):  
Anatomical Characteristics ◽  
Associated Species

Influence of anatomy on the adhesion performance of four wood species

2020 ◽  
Vol 9 (4) ◽  
pp. e31942727
Author(s):  
João Gabriel Missia da Silva ◽  
Pedro Nicó de Medeiros ◽  
Denise Ransolin Soranso ◽  
Vinicius Peixoto Tinti ◽  
José Tarcísio da Silva Oliveira ◽  
...  
Keyword(s):  
Shear Strength ◽  
Specific Gravity ◽  
Wood Species ◽  
Tectona Grandis ◽  
Glue Line ◽  
Anatomical Characteristics ◽  
Ray Cells ◽  
Adhesion Performance ◽  
Adhesion Process

The aim of this study was to evaluate the influence of anatomical characteristics on the adhesion performance of Vatairea sp., Paulownia sp., Aspidosperma populifolium and Tectona grandis wood. Specimens for anatomical, physical and mechanical analyzes were produced from tangentially oriented boards. The treatments were joint glued from pieces of the same anatomical orientation (radial and tangential), evaluated for shear strength and glue line failure. The Vatairea sp wood had the highest specific gravity (0.74 g cm-3) and the Paulownia sp (0.34 g cm-3) wood was smaller. Aspidosperma populifolium species showed the highest shear strength in the glue line in the tangential and radial faces. The anatomical variables with higher influence on the wood adhesion process were pith ray cells and especially fibers that exhibit the greatest correlation with the shear strength of the glue line.

Anatomical Characteristics of C4 and C3 Photosynthetic-pathway Poaceae Plants in Hainan

2011 ◽  
Vol 46 (4) ◽  
pp. 456-469 ◽  
Author(s):  
Yang Hubiao ◽  
Li Xiaoxia ◽  
Yu Daogeng ◽  
Liu Guodao ◽  
Luo Lijuan
Keyword(s):  
Photosynthetic Pathway ◽  
Anatomical Characteristics

scholarly journals Effect of prostatic apex shape (Lee types) and urethral sphincter length in preoperative MRI on very early continence rates after radical prostatectomy

2021 ◽  
Author(s):  
Mike Wenzel ◽  
Felix Preisser ◽  
Matthias Mueller ◽  
Lena H. Theissen ◽  
Maria N. Welte ◽  
...  
Keyword(s):  
Logistic Regression ◽  
Radical Prostatectomy ◽  
Regression Models ◽  
Urethral Sphincter ◽  
Anatomical Characteristics ◽  
Logistic Regression Models ◽  
Pad Test ◽  
Type D ◽  
Multivariable Logistic Regression ◽  
Type C

Abstract Purpose To test the effect of anatomic variants of the prostatic apex overlapping the membranous urethra (Lee type classification), as well as median urethral sphincter length (USL) in preoperative multiparametric magnetic resonance imaging (mpMRI) on the very early continence in open (ORP) and robotic-assisted radical prostatectomy (RARP) patients. Methods In 128 consecutive patients (01/2018–12/2019), USL and the prostatic apex classified according to Lee types A–D in mpMRI prior to ORP or RARP were retrospectively analyzed. Uni- and multivariable logistic regression models were used to identify anatomic characteristics for very early continence rates, defined as urine loss of ≤ 1 g in the PAD-test. Results Of 128 patients with mpMRI prior to surgery, 76 (59.4%) underwent RARP vs. 52 (40.6%) ORP. In total, median USL was 15, 15 and 10 mm in the sagittal, coronal and axial dimensions. After stratification according to very early continence in the PAD-test (≤ 1 g vs. > 1 g), continent patients had significantly more frequently Lee type D (71.4 vs. 54.4%) and C (14.3 vs. 7.6%, p = 0.03). In multivariable logistic regression models, the sagittal median USL (odds ratio [OR] 1.03) and Lee type C (OR: 7.0) and D (OR: 4.9) were independent predictors for achieving very early continence in the PAD-test. Conclusion Patients’ individual anatomical characteristics in mpMRI prior to radical prostatectomy can be used to predict very early continence. Lee type C and D suggest being the most favorable anatomical characteristics. Moreover, longer sagittal median USL in mpMRI seems to improve very early continence rates.

scholarly journals Vertical clinging and leaping induced evolutionary rate shifts in postcranial evolution of tamarins and marmosets (Primates, Callitrichidae)

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Léo Botton-Divet ◽  
John A. Nyakatura
Keyword(s):  
Elbow Joint ◽  
Evolutionary Rate ◽  
Large Diameter ◽  
Morphological Diversity ◽  
Locomotor Behavior ◽  
Shape Descriptors ◽  
High Affinity ◽  
Associated Species ◽  
Future Work ◽  
Shape And Size

Abstract Background Callitrichids comprise a diverse group of platyrrhine monkeys that are present across South and Central America. Their secondarily evolved small size and pointed claws allow them to cling to vertical trunks of a large diameter. Within callitrichids, lineages with a high affinity for vertical supports often engage in trunk-to-trunk leaping. This vertical clinging and leaping (VCL) differs from horizontal leaping (HL) in terms of the functional demands imposed on the musculoskeletal system, all the more so as HL often occurs on small compliant terminal branches. We used quantified shape descriptors (3D geometric morphometrics) and phylogenetically-informed analyses to investigate the evolution of the shape and size of the humerus and femur, and how this variation reflects locomotor behavior within Callitrichidae. Results The humerus of VCL-associated species has a narrower trochlea compared with HL species. It is hypothesized that this contributes to greater elbow mobility. The wider trochlea in HL species appears to correspondingly provide greater stability to the elbow joint. The femur in VCL species has a smaller head and laterally-oriented distal condyles, possibly to reduce stresses during clinging. Similarly, the expanded lesser trochanters visible in VCL species provide a greater lever for the leg retractors and are thus also interpreted as an adaptation to clinging. Evolutionary rate shifts to faster shape and size changes of humerus and femur occurred in the Leontocebus clade when a shift to slower rates occurred in the Saguinus clade. Conclusions Based on the study of evolutionary rate shifts, the transition to VCL behavior within callitrichids (specifically the Leontocebus clade) appears to have been an opportunity for radiation, rather than a specialization that imposed constraints on morphological diversity. The study of the evolution of callitrichids suffers from a lack of comparative analyses of limb mechanics during trunk-to-trunk leaping, and future work in this direction would be of great interest.

scholarly journals Anatomical Characteristics of the Masseter Muscle in Mandibular Prognathism

2021 ◽  
Vol 11 (10) ◽  
pp. 4444
Author(s):  
Ji Ho Yang ◽  
Dong Sun Shin ◽  
Jeong-Hun Yoo ◽  
Hun Jun Lim ◽  
Jun Lee ◽  
...  
Keyword(s):  
Masseter Muscle ◽  
Normal Group ◽  
Length Ratio ◽  
Mandibular Prognathism ◽  
Anatomical Characteristics ◽  
Mandibular Plane ◽  
Mandibular Body ◽  
The Difference

Mandibular prognathism causes functional and esthetic problems. Therefore, many studies have been conducted to understand its etiology. Following our previous study, which revealed that the major characteristic of the mandible with prognathism is the volume/length ratio of the mandibular body and condyle, we analyzed the volume and orientation of the masseter muscle, which inserts into the mandibular body, expecting that the difference in the size of the masseter muscle causes the difference in the mandibular size. This study compared the masseter muscle of the participants in the prognathic group to those in the normal group on the volume/length ratio and orientation. The masseter muscle ratios (volume/length); the angle between the superficial and deep head of the masseter muscle; and the three planes (the palatal, occlusal, and mandibular) were analyzed. A total of 30 participants constituted the normal group (male: 15, female: 15) and 30 patients, the prognathic group (male: 15, female: 15). The results showed that the volume/length ratio of the masseter of the normal group was greater than that of the prognathic group (p < 0.05). In addition, the orientation of both the superficial and deep head of the masseter of the participants in the normal group was more vertical with respect to the mandibular plane than that of the prognathic group (p < 0.05). We concluded that the mechanical disadvantage of the masseter muscle of the prognathic group is attributed to mandibular prognathism.

scholarly journals Selection of Eucalyptus camaldulensis Families for Sustainable Pulpwood Production by Means of Anatomical Characteristics

Forests ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 31
Author(s):  
Ikumi Nezu ◽  
Futoshi Ishiguri ◽  
Haruna Aiso ◽  
Sapit Diloksumpun ◽  
Jyunichi Ohshima ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Fibre Diameter ◽  
Eucalyptus Camaldulensis ◽  
Principal Component ◽  
Wood Properties ◽  
Component Analysis ◽  
Pulp And Paper ◽  
Anatomical Characteristics ◽  
Diameter Fibre ◽  
Sib Families

Sustainable pulpwood production from fast-growing tree plantations is needed for pulp and paper industries. To increase the pulpwood production efficiency, the anatomical characteristics and derived-wood properties of 75 trees from 15 half-sib families of Eucalyptus camaldulensis Dehnh. planted in Thailand were investigated, and then the family was classified by suitability of wood as raw material for pulp and paper products using principal component analysis and clustering. The mean values of vessel diameter, vessel frequency, fibre diameter, fibre lumen diameter, and fibre wall thickness at 2 cm from the cambium were 128 µm, 16 no./mm2, 11.1 µm, 7.1 µm, and 1.88 µm, respectively. In addition, the Runkel ratio, Luce’s shape factor, flexibility coefficient, slenderness ratio, solids factor, and wall coverage ratio (i.e., derived-wood properties) were 0.53, 0.42, 0.64, 85.3, 68 × 103 µm3, and 0.34, respectively. Significant differences in fibre diameter, fibre lumen diameter, and Runkel ratio were found among families. Although significant differences among families were not found for other anatomical characteristics and derived-wood properties, the p-values obtained by an analysis of variance test ranged from 0.050 to 0.088. Based on the results of a principal component analysis and cluster analysis, 15 families were classified into four clusters with different expected pulp and paper characteristics. The suitability of wood from E. camaldulensis half-sib families for pulp and paper can be evaluated by principal component analysis using anatomical characteristics and physical properties as variables. Based on the results, desirable pulp and paper quality may be obtained through the selection of families from this species.

Human Cochlea: Anatomical Characteristics and their Relevance for Cochlear Implantation

2012 ◽  
Vol 295 (11) ◽  
pp. 1791-1811 ◽  
Author(s):  
Helge Rask-Andersen ◽  
Wei Liu ◽  
Elsa Erixon ◽  
Anders Kinnefors ◽  
Kristian Pfaller ◽  
...  
Keyword(s):  
Cochlear Implantation ◽  
Anatomical Characteristics ◽  
Human Cochlea

Saproxylic insect assemblages in Canadian forests: diversity, ecology, and conservation

2008 ◽  
Vol 140 (4) ◽  
pp. 453-474 ◽  
Author(s):  
David W. Langor ◽  
H.E. James Hammond ◽  
John R. Spence ◽  
Joshua Jacobs ◽  
Tyler P. Cobb
Keyword(s):  
Forest Management ◽  
Boreal Forests ◽  
Dead Wood ◽  
Sustainable Forest Management ◽  
Forest Harvesting ◽  
Stand Age ◽  
Managed Forests ◽  
Saproxylic Insects ◽  
Associated Species ◽  
Experimental Burns

AbstractSaproxylic insect assemblages inhabiting dead wood in Canadian forests are highly diverse and variable but quite poorly understood. Adequate assessment of these assemblages poses significant challenges with respect to sampling, taxonomy, and analysis. Their assessment is nonetheless critical to attaining the broad goals of sustainable forest management because such species are disproportionately threatened elsewhere by the reductions in dead wood generally associated with commercial exploitation of northern forests. The composition of the saproxylic fauna is influenced by many factors, including tree species, degree of decay, stand age, and cause of tree death. Wildfire and forest harvesting have differential impacts on saproxylic insect assemblages and on their recovery in postdisturbance stands. Exploration of saproxylic insect responses to variable retention harvesting and experimental burns is contributing to the development of prescriptions for conserving saproxylic insects in boreal forests. Understanding of processes that determine diversity patterns and responses of saproxylic insects would benefit from increased attention to natural history. Such work should aim to provide a habitat-classification system for dead wood to better identify habitats (and associated species) at risk as a result of forest management. This tool could also be used to improve strategies to better maintain saproxylic organisms and their central nutrient-cycling functions in managed forests.

Sign in / Sign up

Export Citation Format

Share Document