Linear Dynamic Analysis of Different Structural Systems for Medium Rise Buildings (A Case Study)

2015 ◽  
Keyword(s):  
Dynamic Analysis ◽  
Structural Systems ◽  
Linear Dynamic

scholarly journals Seismic Strengthening Effects of Full-Size Reinforced Concrete Frame Retrofitted with Novel Concrete-Filled Tube Modular Frame by Pseudo-Dynamic Testing

2021 ◽  
Vol 11 (11) ◽  
pp. 4898
Author(s):  
Jin-Seon Kim ◽  
Ju-Seong Jung ◽  
Dong-Keun Jung ◽  
Eui-Yong Kim ◽  
Kang-Seok Lee
Keyword(s):  
Dynamic Analysis ◽  
Shear Failure ◽  
Dynamic Testing ◽  
Seismic Intensity ◽  
Seismic Retrofitting ◽  
Restoring Force ◽  
Rc Structures ◽  
Linear Dynamic ◽  
Non Linear ◽  
Force Characteristics

The present study proposes a new seismic retrofitting method using a concrete-filled tube modular frame (CFT-MF) system, a novel technique to overcome and improve the limitations of existing seismic strengthening methods. This CFT-MF seismic retrofitting method makes the most of the advantages of both concrete and steel pipes, thereby significantly improving constructability and increasing integration between the existing structure and the reinforcement joints. This method falls into the category of typical seismic retrofitting methods that focus on increasing strength, in which the required amount of seismic reinforcement can be easily estimated. Therefore, the method provides an easy solution to improving the strength of existing reinforced concrete (RC) structures with non-seismic details that are prone to shear failure. In the present study, a full-size two-story test frame modeled from existing domestic RC structures with non-seismic details was subjected to pseudo-dynamic testing. As a result, the effect of the CFT-MF system, when applied to existing RC structures, was examined and verified, especially as to its seismic retrofitting performance, i.e., restoring force characteristics, stiffness reinforcement, and seismic response control. In addition, based on the pseudo-dynamic testing results, a restoring force characteristics model was proposed to implement non-linear dynamic analysis of a structure retrofitted with the CFT-MF system (i.e., the test frame). Finally, based on the proposed restoring force characteristics, non-linear dynamic analysis was conducted, and the results were compared with those obtained by the pseudo-dynamic tests. The results showed that the RC frame (building) with no retrofitting measures applied underwent shear failure at a seismic intensity of 200 cm/s2, the threshold applied in seismic design in Korea. In contrast, in the frame (building) retrofitted with the CFT-MF system, only minor earthquake damage was observed, and even when the maximum seismic intensity (300 cm/s2) that may occur in Korean was applied, small-scale damage was observed. These results confirmed the validity of the seismic retrofitting method based on the CFT-MF system developed in the present study. The non-linear dynamic analysis and the pseudo-dynamic test showed similar results, with an average deviation of 10% or less in seismic response load and displacement.

Non-linear dynamic analysis of time varying length flexible body

2020 ◽  
Vol 2020 (0) ◽  
pp. 513
Author(s):  
Masato TAKEUCHI ◽  
Kensuke HARA ◽  
Hiroshi YAMAURA
Keyword(s):  
Dynamic Analysis ◽  
Flexible Body ◽  
Time Varying ◽  
Linear Dynamic ◽  
Non Linear ◽  
Varying Length

On the Dynamic Analysis of Roller Chain Drives: Part II — Case Study

1992 ◽  
Author(s):  
Nicholas M. Veikos ◽  
Ferdinand Freudenstein
Keyword(s):  
Dynamic Analysis ◽  
Time Domain ◽  
Equations Of Motion ◽  
Axial Stiffness ◽  
Roller Chain ◽  
Computer Aided ◽  
Computational Aspects ◽  
The Time Domain ◽  
Chain Drives

Abstract Part I of this paper (5) summarized the previous work and has described the theoretical and computational aspects of a computer-aided procedure which has been developed by the authors for the dynamic analysis of roller chain drives. Lagrange’s equations of motion have been derived by assuming the roller chain to behave as a series of masses lumped at the roller centers and connected by bars of constant axial stiffness. The equations of motion are solved in the time domain until steady state conditions are achieved.

Sign in / Sign up

Export Citation Format

Share Document