scholarly journals STATE OF THE ART SURVEY ON USING ROBOTS IN OIL AND GAS INDUSTRY

2017 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Gas Industry

scholarly journals Insights into the applications of waste materials in the oil and gas industry: state of the art review, availability, cost analysis, and classification

2020 ◽  
Vol 10 (5) ◽  
pp. 2137-2151 ◽  
Author(s):  
Abo Taleb T. Al-Hameedi ◽  
Husam H. Alkinani ◽  
Hussien W. Albazzaz ◽  
Shari Dunn-Norman ◽  
Mohammed M. Alkhamis
Keyword(s):  
Cost Analysis ◽  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Waste Materials ◽  
Gas Industry

The State of the Art and Challenges in Geomechanical Modeling of Injector Wells: A Review Paper

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
J. F. Bautista ◽  
A. Dahi Taleghani
Keyword(s):  
Oil And Gas ◽  
Review Paper ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Fluid Injection ◽  
Well Performance ◽  
Sand Production ◽  
Gas Industry ◽  
Injection Process ◽  
Local Compaction

Fluid injection is a common practice in the oil and gas industry found in many applications such as waterflooding and disposal of produced fluids. Maintaining high injection rates is crucial to guarantee the economic success of these projects; however, there are geomechanical risks and difficulties involved in this process that may threat the viability of fluid injection projects. Near wellbore reduction of permeability due to pore plugging, formation failure, out of zone injection, sand production, and local compaction are challenging the effectiveness of the injection process. Due to these complications, modeling and simulation has been used as an effective tool to assess injectors' performance; however, different problems have yet to be addressed. In this paper, we review some of these challenges and the solutions that have been proposed as a primary step to understand mechanisms affecting well performance.

The State of the Art and Challenges in Geomechanical Modeling of Injector Wells: A Review Paper

2016 ◽  
Author(s):  
J. F. Bautista ◽  
A. Dahi Taleghani
Keyword(s):  
Oil And Gas ◽  
Review Paper ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Fluid Injection ◽  
Well Performance ◽  
Sand Production ◽  
Gas Industry ◽  
Injection Process ◽  
Local Compaction

Fluid injection is a common practice in the Oil and Gas industry found in many applications such as waterflooding and disposal of produced fluids. Maintaining high injection rates is crucial to guarantee the economic success of these projects; however, there are geomechanical risks and difficulties involved in this process that may threat the viability of fluid injection projects. Near wellbore reduction of permeability due to pore plugging, formation failure, out of zone injection, sand production, and local compaction are challenging the effectiveness of the injection process. Due to these complications, modeling and simulation has been used as an effective tool to assess injectors’ performance, however, different problems have yet be addressed. In this paper, we review some of these challenges and the solutions that have been proposed as a primary step to understand mechanisms affecting well performance.

Validation of a Simplified LiDAR-Buoy Model Using Open Sea Measurements

2018 ◽  
Author(s):  
Wei Yu ◽  
Oliver Bischoff ◽  
Po Wen Cheng ◽  
Gerrit Wolken-Moehlmann ◽  
Julia Gottschall
Keyword(s):  
Numerical Model ◽  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Offshore Wind ◽  
Gas Industry ◽  
Open Sea ◽  
Induced Motion ◽  
Wind Measurements ◽  
Wind Resource

This work validates a numerical model of the Fraunhofer IWES LiDAR-Buoy by using open sea measurements. Such floating LiDAR systems (FLS) have been deployed for almost twenty years, aiming at exploring the offshore wind resource with lower cost. However, the uncertainty of wind measurements from a moving LiDAR are not clear, particularly due to the wave- and current-induced motion of the buoy. Therefore a numerical model with state-of-the-art approaches in conventional oil and gas industry was developed to quantify uncertainty and understand the effect of environmental conditions on the buoy. The model was validated against data from a measurement campaign at the offshore research platform FINO 3. The results show the challenges and limitations when transferring the experience from the oil and gas industry directly because of the different geometries and the much smaller buoys used for FLS. It has been found that the position of the LiDAR is dominated by the current, which is however commonly simplified in the state-of-the-art approach; the rotational motions are significantly influenced by the wave and can be reproduced up to a certain limit.

Sustainable applications utilizing sulfur, a by-product from oil and gas industry: A state-of-the-art review

2019 ◽  
Vol 95 ◽  
pp. 78-89 ◽  
Author(s):  
Jan-Georg Wagenfeld ◽  
Khalid Al-Ali ◽  
Saif Almheiri ◽  
Angela F. Slavens ◽  
Nicolas Calvet
Keyword(s):  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Gas Industry

Smart and state-of-the-art materials in oil and gas industry

2021 ◽  
pp. 1-51
Author(s):  
O. Karakoc ◽  
Y. Yegin ◽  
M. Ozdogan ◽  
M. Salman ◽  
N. Nagabandi ◽  
...  
Keyword(s):  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Gas Industry

A state-of-the-art review of the application of nanotechnology in the oil and gas industry with a focus on drilling engineering

2020 ◽  
Vol 191 ◽  
pp. 107118 ◽  
Author(s):  
Jagar A. Ali ◽  
Abdullah M. Kalhury ◽  
Ayub N. Sabir ◽  
Rawezh N. Ahmed ◽  
Nali H. Ali ◽  
...  
Keyword(s):  
Oil And Gas ◽  
State Of The Art ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Drilling Engineering
Sign in / Sign up

Export Citation Format

Share Document