Fig. 6 von Mises equivalent stress distribution of screw in spinopelvic model with S2AI screw (75mm of screw length and 15° of head angle) under various loading conditions v1 (protocols.io.kxpcxmn)

protocols.io ◽  
2017 ◽  
Author(s):  
Jong Ki ◽  
Beop Yong ◽  
Tae Sik ◽  
Seung Min ◽  
Hyung Sik ◽  
...  
Keyword(s):  
Stress Distribution ◽  
Equivalent Stress ◽  
Loading Conditions ◽  
Screw Length ◽  
Von Mises Equivalent Stress ◽  
Von Mises

Numerical Analysis of the Stress in Joggle Double Lap Joint

2012 ◽  
Vol 511 ◽  
pp. 150-153
Author(s):  
Xiao Ling Zheng ◽  
Ling Wu ◽  
Min You ◽  
Kai Liu ◽  
Cun Jun Chen
Keyword(s):  
Stress Distribution ◽  
Equivalent Stress ◽  
Peak Stress ◽  
Middle Part ◽  
Lap Joints ◽  
Lap Joint ◽  
The Finite Element Method ◽  
Adhesively Bonded ◽  
Von Mises Equivalent Stress ◽  
Von Mises

Both normal and joggle double lap joints were numerical analyzed to get the stress distribution in mid-bondline and in adherends near the interface using the finite element method (FEM). The results from the numerical simulation show that nearly all the peak values of the stress components as well as the von Mises equivalent stress distributed in both mid-bondline and adherend near the interface of the adhesively bonded joggle double lap joint are significantly decreased to the normal one. It was pointed out that the load bearing capacity of the joggle double lap joint may be higher than that of the double lap joint for its decrease of peak stress, much evenly stress distribution in the middle part of the overlap zone so that more load can be subjected by the joggle double lap joint.

An Analysis of Filament Overwound Toroidal Pressure Vessels and Optimum Design of Such Structures

2002 ◽  
Vol 124 (2) ◽  
pp. 215-222 ◽  
Author(s):  
Shuguang Li ◽  
John Cook
Keyword(s):  
Optimum Design ◽  
Equivalent Stress ◽  
Mechanical Damage ◽  
Stress Rupture ◽  
Optimization Procedure ◽  
Pressure Vessels ◽  
Thickness Variation ◽  
Von Mises Equivalent Stress ◽  
Metal Liner ◽  
Von Mises

This paper is concerned with the membrane shell analysis of filament overwound toroidal pressure vessels and optimum design of such pressure vessels using the results of the analysis by means of mathematical nonlinear programming. The nature of the coupling between overwind and linear has been considered based on two extreme idealizations. In the first, the overwind is rigidly coupled with the liner, so that the two deform together in the meridional direction as the vessel dilates. In the second, the overwind is free to slide relative to the linear, but the overall elongations of the two around a meridian are identical. Optimized designs with the two idealizations show only minor differences, and it is concluded that either approximation is satisfactory for the purposes of vessel design. Aspects taken into account are the intrinsic overwind thickness variation arising from the winding process and the effects of fiber pre-tension. Pre-tension can be used not only to defer the onset of yielding, but also to achieve a favorable in-plane stress ratio which minimizes the von Mises equivalent stress in the metal liner. Aramid fibers are the most appropriate fibers to be used for the overwind in this type of application. The quantity of fiber required is determined by both its short-term strength and its long-term stress rupture characteristics. An optimization procedure for the design of such vessels, taking all these factors into account, has been established. The stress distributions in the vessels designed in this way have been examined and discussed through the examples. A design which gives due consideration of possible mechanical damage to the surface of the overwind has also been addressed.

Biomechanical Behavior of All-Ceramic Crowns with Variable Thicknesses of Zirconia Frameworks

2016 ◽  
Vol 835 ◽  
pp. 97-102
Author(s):  
Liliana Porojan ◽  
Florin Topală ◽  
Sorin Porojan
Keyword(s):  
Mechanical Behavior ◽  
Equivalent Stress ◽  
The Finite Element Method ◽  
Static Loads ◽  
Biomechanical Behavior ◽  
All Ceramic ◽  
Ceramic Crowns ◽  
Von Mises Equivalent Stress ◽  
Von Mises ◽  
Posterior Restorations

Zirconia is an extremely successful material for prosthetic restorations, offering attractive mechanical and optical properties. It offers several advantages for posterior restorations because it can withstand physiological posterior forces. The aim of the study was to achieve the influence of zirconia framework thickness on the mechanical behavior of all-ceramic crowns using numerical simulation. For the study a premolar was chosen in order to simulate the mechanical behavior in the components of all-ceramic crowns and teeth structures regarding to the zirconia framework thickness. Maximal Von Mises equivalent stress values were recorded in teeth and restorations. Due to the registered maximal stress values it can be concluded that it is indicated to achieve frameworks of at least 0.5 mm thickness in the premolar area. Regarding stress distribution concentration were observed in the veneer around the contact areas with the antagonists, in the framework under the functional cusp and in the oral part overall and in dentin around and under the marginal line, also oral. The biomechanical behavior of all ceramic crowns under static loads can be investigated by the finite element method.

Dynamic Behavior of FGM Doubly Curved Panel due to Mechanical Loading

2019 ◽  
Vol 950 ◽  
pp. 200-204
Author(s):  
Guang Ping Zou ◽  
Nadiia Dergachova
Keyword(s):  
Mechanical Loading ◽  
Volume Fraction ◽  
Equivalent Stress ◽  
Functionally Graded ◽  
Excitation Mode ◽  
Simply Supported ◽  
Curved Panel ◽  
Von Mises Equivalent Stress ◽  
Von Mises ◽  
Doubly Curved

This study presents the dynamic response analyze of a simply supported and isotropic functionally graded (FG) double curved panel under mechanical loading. The aim of the research was to investigate mechanical behavior in a FGM curved panel due to different excitation mode of dynamic loading. The novelty of this research is an investigation of von Mises equivalent stress distribution in double curved panel due to different excitation mode. Computed results are found to agree well with the results reported in the literature. Moreover, influence of volume fraction of the material is studied.

Mechanical Properties and Experimental Study of a Composite Polishing Plate during Super-High Polishing

2010 ◽  
Vol 135 ◽  
pp. 337-342
Author(s):  
Li Zhou ◽  
Shu Tao Huang ◽  
Li Fu Xu
Keyword(s):  
Chemical Reaction ◽  
High Speed ◽  
Equivalent Stress ◽  
Stress Distributions ◽  
Centrifugal Forces ◽  
X Ray ◽  
High Speed Rotation ◽  
Speed Rotation ◽  
Von Mises Equivalent Stress ◽  
Von Mises

A new composite polishing plate for polishing of CVD diamond films has been designed. The displacement and stress distributions of the high speed rotation polishing plate have been investigated due to centrifugal forces, and the polishing mechanism of super-high polishing has been analyzed by using X-ray photo-electron spectroscopy. The results showed that the displacements both in axial and radial increase with the increasing of the rotational speed. When the rotation speed reached to 1200 rad/s, the von Mises equivalent stress is about 242 MPa, which is safe for the composite polishing plate. Additional, the polishing mechanism is mainly the chemical reaction between carbon and titanium during the super-high speed polishing. At elevated temperature, the chemical reaction between oxygen and titanium, oxygen and carbon can also occur.

Sign in / Sign up

Export Citation Format

Share Document