scholarly journals A fine desintegration of plants suitable for composite biofuels production

2012 ◽  
Vol 49 (No. 1) ◽  
pp. 7-11 ◽  
Author(s):  
J. Souček ◽  
I. Hanzlíková ◽  
P. Hutla
Keyword(s):  
Energy Consumption ◽  
Technological Process ◽  
Material Properties ◽  
Statistical Evaluation ◽  
Raw Materials ◽  
Correct Choice ◽  
Input And Output ◽  
Input Material ◽  
Wide Range ◽  
Average Size

In case of pressed composite biofuels production the important part of the production process is the input row materials disintegration. In dependence on disintegrated material properties, disintegration device, grinding stage and technological process there is in practice necessary for disintegration of culm materials 0.5–7% and of wooden species even 0.75–10% of total energetical content of material. A wide range of these figures means that in this sphere of raw materials adaptation can be reached relative high savings through correct choice of technological process and device. The authors of the paper have measured energy consumption of fine disintegration of lignocellulose materials in dependence on particles size and moisture. By the realized measurement of different average size of both input and output particles and consequent statistical evaluation was proved the fiducial energy consumption increase at higher stage of disintegration and higher moisture of the input material. All measurements were carried-out for the grinding mill ŠK 300 and the output particles size was limited by the exchange sieves mesh dimension.

scholarly journals Pulp moulding machines for the production of packing paper elements

2005 ◽  
Vol 59 (7-8) ◽  
pp. 180-184
Author(s):  
Ljubomir Lukic ◽  
Milorad Krgovic ◽  
Ilija Jarakovic
Keyword(s):  
Technological Process ◽  
Raw Materials ◽  
Operating Conditions ◽  
Waste Paper ◽  
Paper Pulp ◽  
Automatic Operation ◽  
Rotation System ◽  
Wide Range

Paper pulp molds are now commonly applied in the technology of modern packing for a wide range of products. The technological process of producing the paper molds has three basic phases: paper pulp preparation, in which water and waste paper are the basic raw materials, the formation of product in tool pulp moulding machines and process drying. The firm "SERVOTEH" from Belgrade has developed various pulp moulding machines for different operating conditions (manual, semiautomatic and automatic operation), different manufacturing capacities and an alternative number of tools. The system of "SERVOTEH" pulp moulding machines covers several construction solutions: a sinking system, veer system and rotation system. This paper presents the technological process, as well as the integral and concept approach to the design of pulp moulding machines and system tools.

scholarly journals Issues of resource and energy saving in corundum production

2021 ◽  
Vol 24 (6) ◽  
pp. 1347-1356
Author(s):  
P. S. Palyanicin ◽  
P. A. Petrov ◽  
V. Yu. Bazhin
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Technological Process ◽  
Specific Energy ◽  
Raw Materials ◽  
Specific Energy Consumption ◽  
Material Balance ◽  
Electricity Consumption ◽  
Product Yield ◽  
Resource Saving

The purpose of this article is study and identification of the most promising trends and engineering solutions in order to improve resource saving and energy efficiency in the production of corundum on the basis of the conducted patent review on melting improvement and optimization. The ways to optimize the corundum production are considered in three directions from the point of view of energy saving. The first direction relates to the development of promising engineering developments. The latter are studied to select rational operating modes and determine the main factors affecting voltage surges during the technological process and useful product yield. Consideration is given to the conditions for reducing specific energy consumption and improvement of production environmental friendliness at all stages beginning from isothermal sintering of corundum, production of electrocorundum, fine corundum to single corundum crystals. The second direction is the optimization of corundum production at all stages for the development of an optimal control algorithm for the technological process. In this case the electricity consumption might be reduced by 10-12% as compared to current standards. The third direction is the development of engineering solutions involving the change of individual structural units of furnaces, namely, the use of modern components and new heat insulating materials, as well as the application of spent heat carriers as the sources of secondary energy resources and the introduction of additional controllers of the automated control system of the process. The analytical study has shown that the result of optimization should be upgraded designs of plants and electrical equipment, which can provide maximum electrochemical efficiency, and corresponding furnace tightness. Criteria for energy supply and energy quality making possible to stabilize furnace material balance and solve resource saving issues have been developed. These measures allow to reduce the loss of raw materials up to 20-25%, the specific energy consumption under the production of corundum by 2-3 thousand kWh per 1 t.

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

1988 ◽  
Vol 46 ◽  
pp. 582-583
Author(s):  
C. J. Chan ◽  
K. R. Venkatachari ◽  
W. M. Kriven ◽  
J. F. Young
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Shape Change ◽  
Microstructural Characterization ◽  
Particle Size Effect ◽  
Dicalcium Silicate ◽  
Laser Melting ◽  
Uniform Size ◽  
Cell Shape Change ◽  
Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Gluten-Free Dry Mixtures with Rice and Amaranth for Children over Three Years Old with Gluten Intolerance

Food Industry ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 23-31
Author(s):  
Sergey Urubkov ◽  
Svetlana Khovanskaya ◽  
Ekaterina Pyrieva ◽  
Olga Georgieva ◽  
Stanislav Smirnov
Keyword(s):  
Celiac Disease ◽  
Treatment Effectiveness ◽  
Raw Materials ◽  
Calculated Data ◽  
Limited Range ◽  
Gluten Free ◽  
Fruit And Vegetable ◽  
Organoleptic Evaluation ◽  
Free Products ◽  
Wide Range

Diet therapy is one of the main approaches to the treatment of a wide range of diseases of the digestive system. The treatment effectiveness of celiac disease depends on how strictly the patient adheres to a gluten-free diet. It is often disrupted due to the limited range of recommended foods and dishes, especially for children who are particularly sensitive to dietary restrictions. In this case, the development of new types of specialized gluten-free products is relevant, allowing to expand the diet both in terms of nutritional value and taste diversity. This study concerns the recipe developments of dry gluten-free mixtures using rice and amaranth with the inclusion of fruit and vegetable and berry raw materials intended for the nutrition of children over three years old suffering from celiac disease. When developing the recipes, researchers used various combinations of rice and amaranth flour, as well as fruit and vegetable powders. The rice flour composition varied in the range from 15 to 75%; amaranth – from 15 to 45%; fruit and vegetable and berry powders – up to 10%. The finished product was gluten-free cookies, muffins, pancakes made of rice and amaranth. Organoleptic evaluation showed that the studied samples of gluten-free cookies have high quality characteristics, have a pleasant taste and aroma. According to the calculated data, specialized gluten-free dry mixtures intended for children over three years with celiac disease can serve as an important source of: vegetable carbohydrates – from 26.81 to 55.19 g / 100g of finished products; protein – from 4.06 to 11.82 g/100g of finished products; dietary fiber – from 3.82 to 6.36 g/100g of finished products; and energy – from 158.12 to 333.96 kcal/100g of finished products) The developed recipess of gluten-free products can help to provide children with an adequate amount of nutrients and energy.

Safety assessment of biological raw materials in the system of medicines quality assurance

2020 ◽  
pp. 63-72
Author(s):  
Yu. Olefir ◽  
E. Sakanyan ◽  
I. Osipova ◽  
V. Dobrynin ◽  
M. Smirnova ◽  
...  
Keyword(s):  
Raw Materials ◽  
State Level ◽  
The State ◽  
Spongiform Encephalopathy ◽  
Safety Standards ◽  
Wide Range ◽  
The Russian Federation ◽  
Key Aspects ◽  
First Time ◽  
Medicines Quality

The entry of a wide range of biotechnological products into the pharmaceutical market calls for rein-forcement of the quality, efficacy and safety standards at the state level. The following general monographs have been elaborated for the first time to be included into the State Pharmacopoeia of the Russian Federation, XIV edition: "Viral safety" and "Reduction of the risk of transmitting animal spongiform encephalopathy via medicinal products". These general monographs were elaborated taking into account the requirements of foreign pharmacopoeias and the WHO recommendations. The present paper summarises the key aspects of the monographs.

Improving Energy Efficiency in Internet of Things using Artificial Bee Colony Algorithm

2020 ◽  
Vol 14 ◽  
Author(s):  
M. Sivaram ◽  
V. Porkodi ◽  
Amin Salih Mohammed ◽  
S. Anbu Karuppusamy
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Artificial Bee Colony ◽  
Trust Model ◽  
Sensor Nodes ◽  
Remote Areas ◽  
Bee Colony ◽  
Important Concern ◽  
Wide Range ◽  
Iot Devices

Background: With the advent of IoT, the deployment of batteries with a limited lifetime in remote areas is a major concern. In certain conditions, the network lifetime gets restricted due to limited battery constraints. Subsequently, the collaborative approaches for key facilities help to reduce the constraint demands of the current security protocols. Aim: This work covers and combines a wide range of concepts linked by IoT based on security and energy efficiency. Specifically, this study examines the WSN energy efficiency problem in IoT and security for the management of threats in IoT through collaborative approaches and finally outlines the future. The concept of energy-efficient key protocols which clearly cover heterogeneous IoT communications among peers with different resources has been developed. Because of the low capacity of sensor nodes, energy efficiency in WSNs has been an important concern. Methods: Hence, in this paper, we present an algorithm for Artificial Bee Colony (ABC) which reviews security and energy consumption to discuss their constraints in the IoT scenarios. Results: The results of a detailed experimental assessment are analyzed in terms of communication cost, energy consumption and security, which prove the relevance of a proposed ABC approach and a key establishment. Conclusion: The validation of DTLS-ABC consists of designing an inter-node cooperation trust model for the creation of a trusted community of elements that are mutually supportive. Initial attempts to design the key methods for management are appropriate individual IoT devices. This gives the system designers, an option that considers the question of scalability.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Sensing of Nickel(II) Ions by Immobilizing Ligands and Using Different SPEs

2021 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Liliana Anchidin-Norocel ◽  
Sonia Amariei ◽  
Gheorghe Gutt
Keyword(s):  
Bismuth Oxide ◽  
Human Population ◽  
Raw Materials ◽  
Sensor Technology ◽  
Cyclic Voltammogram ◽  
Accurate Analysis ◽  
Nickel Allergy ◽  
Nickel Ions ◽  
Practical Applications ◽  
Wide Range

The aim of this paper is the development of a sensor for the quantification of nickel ions in food raw materials and foods. It is believed that about 15% of the human population suffers from nickel allergy. In addition to digestive manifestations, food intolerance to nickel may also have systemic manifestations, such as diffuse dermatitis, diffuse itching, fever, rhinitis, headache, altered general condition. Therefore, it is necessary to control this content of nickel ions for the health of the human population by developing a new method that offers the advantages of a fast, not expensive, in situ, and accurate analysis. For this purpose, bismuth oxide-screen-printed electrodes (SPEs) and graphene-modified SPEs were used with a very small amount of dimethylglyoxime and amino acid L-histidine that were deposited. A potentiostat that displays the response in the form of a cyclic voltammogram was used to study the electrochemical properties of nickel standard solution with different concentrations. The results were compared and the most sensitive sensor proved to be bismuth oxide-SPEs with dimethylglyoxime (Bi2O3/C-dmgH2) with a linear response over a wide range (0.1–10 ppm) of nickel concentrations. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The Bi2O3/C-dmgH2 sensor showed good viability for nickel analysis in food samples (cocoa, spinach, cabbage, and red wine) and demonstrated significant advancement in sensor technology for practical applications.

scholarly journals Production of Microfibrillated Cellulose from Fast-Growing Poplar and Olive Tree Pruning by Physical Pretreatment

2021 ◽  
Vol 11 (14) ◽  
pp. 6445
Author(s):  
David Ibarra ◽  
Raquel Martín-Sampedro ◽  
Bernd Wicklein ◽  
Úrsula Fillat ◽  
María E. Eugenio
Keyword(s):  
Negative Impact ◽  
Raw Materials ◽  
Olive Tree ◽  
Barrier Properties ◽  
Microfibrillated Cellulose ◽  
Mechanical Resistance ◽  
Fast Growing ◽  
Wide Range ◽  
Pfi Refining ◽  
Tree Pruning

Motivated by the negative impact of fossil fuel consumption on the environment, the need arises to produce materials and energy from renewable sources. Cellulose, the main biopolymer on Earth, plays a key role in this context, serving as a platform for the development of biofuels, chemicals and novel materials. Among the latter, micro- and nanocellulose have been receiving increasing attention in the last few years. Their many attractive properties, i.e., thermal stability, high mechanical resistance, barrier properties, lightweight, optical transparency and ease of chemical modification, allow their use in a wide range of applications, such as paper or polymer reinforcement, packaging, construction, membranes, bioplastics, bioengineering, optics and electronics. In view of the increasing demand for traditional wood pulp (e.g., obtained from eucalypt, birch, pine, spruce) for micro/nanocellulose production, dedicated crops and agricultural residues can be interesting as raw materials for this purpose. This work aims at achieving microfibrillated cellulose production from fast-growing poplar and olive tree pruning using physical pretreatment (PFI refining) before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with similar properties to that obtained from a commercial industrial eucalypt pulp, producing films with high mechanical properties and low wettability. According to these properties, different applications for cellulose microfibers suspensions and films are discussed.

Sign in / Sign up

Export Citation Format

Share Document