scholarly journals Agronomically important traits of emmer wheat

2012 ◽  
Vol 58 (No. 8) ◽  
pp. 341-346 ◽  
Author(s):  
P. Konvalina ◽  
I. Capouchová ◽  
Z. Stehno
Keyword(s):  
Harvest Index ◽  
Agronomic Traits ◽  
Farming Systems ◽  
Emmer Wheat ◽  
Breeding Programs ◽  
Low Input ◽  
Yield Rate ◽  
Wheat Diseases ◽  
Negative Factors ◽  
Agronomically Important Traits

Particular agronomic traits of six landraces of Triticum diccocum Schrank (Schuebl) were studied during three years in Prague and Česk&eacute; Budějovice localities, Czech Republic. The analysis of tolerance to drought by using the method of <sup>13</sup>C discrimination (CID) was also focused on in the research. All the tested varieties were resistant to usual wheat diseases. An inclination of particular varieties to lodging and a low harvest index rate (0.33) were negative factors having a significant effect on the yield rate. Meanwhile, all the varieties contained a high percentage of proteins in grain (17.92%) which was an important advantage in low input conditions. The landraces of emmer wheat also proved to be more tolerant to drought (CID = 25.82&permil;) than check varieties of bread wheat (CID = 26.70&permil;). Results of the research showed that some of the emmer landraces may be successfully grown and used directly in low-input farming systems or in breeding programs focused on the breeding of suitable varieties for low-input farming. &nbsp;

scholarly journals Assessment of Tomato Recombinant Lines in Conventional and Organic Farming Systems for Productivity and Fruit Quality Traits

Agronomy ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 129
Author(s):  
Ilias D. Avdikos ◽  
Rafail Tagiakas ◽  
Ioannis Mylonas ◽  
Ioannis N. Xynias ◽  
Athanasios G. Mavromatis
Keyword(s):  
Fruit Quality ◽  
Farming Systems ◽  
Hybrid Vigor ◽  
Yield Potential ◽  
High Input ◽  
Breeding Programs ◽  
Low Input ◽  
Organic Farming Systems ◽  
Additive Genes ◽  
Single Cross Hybrids

It is estimated that more than 95% of organic agriculture is based on crop cultivars that were bred for the conventional high-input sector. Most selections were made through conventional breeding programs and lack important traits required under organic and low-input conditions. Hybrids are the most common type of cultivars used in tomato because of heterosis. In tomato, continuous selfing enabled homozygosity to exploit favorable additive genes, resulting in the so-called inbred vigor. This paper presented the possibility to express inbred vigor at a level equal to or greater than hybrid vigor in tomato when cultivated under organic low input conditions. The evaluation of the recombinant lines produced through classical reverse breeding from four F1 single cross hybrids was done at low- and high-input farming systems. The results show that, following the appropriate breeding process in early generation selection and under low-input conditions, it is possible to produce recombinant lines, demonstrating inbred vigor in yield potential and fruit quality. These genetic materials can stand as new dynamic cultivars intended for cultivation in organic, low-input, or high-input conditions, depending on their performance in different farming systems at the later stages of evaluation.

scholarly journals THE EVALUATION OF YIELD AND AGRONOMIC TRAITS OF FLAX GENOTYPES UNDER LATVIAN CONDITIONS

2019 ◽  
Vol 1 ◽  
pp. 277
Author(s):  
Inga Stafecka ◽  
Veneranda Stramkale ◽  
Ieva Kroiča ◽  
Aldis Stramkalis
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Yield Components ◽  
Harvest Index ◽  
Agronomic Traits ◽  
Natural Infection ◽  
Ripening Stage ◽  
Genotypic And Phenotypic Correlations ◽  
Total Plant ◽  
Agronomically Important Traits

This study aim was evaluated of flax genotypes regarding productivity, resistance to lodging and diseases as well as yield dependence relationships among phenotypic and quality traits. The 14 fibre flax genotypes were evaluated in field conditions on the background of natural infection from 2014 to 2018 for agronomically important traits and from 2015 to 2018 for occurrence diseases of flax. The data were recorded for the 15 following agronomic traits, such days to flowering, days to early yellow ripening stage, total plant height, technical height, stem yield, fibre content, 1000 seed weight, vessels per plant, harvest index, seed yield, oil content, resistance to lodging and fungal diseases during early yellow ripening stage. Genotypic and phenotypic correlations between yield and yield components were identified that total plant height, technical height and days to early yellow ripening stage played a major role on stem yield as well vessels per plant and harvest index on seed yield. The flax genotypes ‘Vilani’, ‘L26-1’, ‘K9-1’, ‘T36-1’, ‘S37-1’ exhibited significant highest stem yield ranging from 643.20 to 693.32 g m-2 and technical length ranging from 65.90 to 70.58 cm comparing to standard variety ‘Vega 2’. The most perspective genotype of ‘Vilani’ with quit low susceptibility to anthracnose, pasmo and powdery mildew and resistance to lodging was identified.

scholarly journals Identification of the Optimum Environments for the High Yield and Quality Traits of Lentil Genotypes Evaluated in Multi-Location Trials

2021 ◽  
Vol 13 (15) ◽  
pp. 8247
Author(s):  
Dimitrios N. Vlachostergios ◽  
Christos Noulas ◽  
Anastasia Kargiotidou ◽  
Dimitrios Baxevanos ◽  
Evangelia Tigka ◽  
...  
Keyword(s):  
Crude Protein ◽  
Agronomic Traits ◽  
High Yield ◽  
Breeding Programs ◽  
Growing Seasons ◽  
Yield And Quality ◽  
Food And Feed ◽  
Superior Genotypes ◽  
Selection Of ◽  
The Ideal

Lentil is a versatile and profitable pulse crop with high nutritional food and feed values. The objectives of the study were to determine suitable locations for high yield and quality in terms of production and/or breeding, and to identify promising genotypes. For this reason, five lentil genotypes were evaluated in a multi-location network consisting of ten diverse sites for two consecutive growing seasons, for seed yield (SY), other agronomic traits, crude protein (CP), cooking time (CT) and crude protein yield (CPY). A significant diversification and specialization of the locations was identified with regards to SY, CP, CT and CPY. Different locations showed optimal values for each trait. Locations E4 and E3, followed by E10, were “ideal” for SY; locations E1, E3 and E7 were ideal for high CP; and the “ideal” locations for CT were E3 and E5, followed by E2. Therefore, the scope of the cultivation determined the optimum locations for lentil cultivation. The GGE-biplot analysis revealed different discriminating abilities and representativeness among the locations for the identification of the most productive and stable genotypes. Location E3 (Orestiada, Region of Thrace) was recognized as being optimal for lentil breeding, as it was the “ideal” or close to “ideal” for the selection of superior genotypes for SY, CP, CT and CPY. Adaptable genotypes (cv. Dimitra, Samos) showed a high SY along with excellent values for CP, CT and CPY, and are suggested either for cultivation in many regions or to be exploited in breeding programs.

scholarly journals Influence of Organic and Inorganic Fertilizers on Coriander (Coriandrum sativum L.) Agronomic Traits, Essential Oil and Components under Semi-Arid Climate

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1427
Author(s):  
Gulen Ozyazici
Keyword(s):  
Essential Oil ◽  
Seed Yield ◽  
Harvest Index ◽  
Agronomic Traits ◽  
Climatic Conditions ◽  
Coriandrum Sativum ◽  
Inorganic Fertilizers ◽  
Yield And Quality ◽  
Biological Yield

Environmental contamination and the excessive use of inorganic fertilizers resulting in stagnant yields of field crops which necessitate the utilization of combined fertilization approach under changing climatic conditions. Current study was aimed to clarify the influence of several fertilizer sources (chemical, organic, organomineral fertilizers) on yield and quality of coriander (Coriandrum sativum L.). The results revealed that the fertilizer sources significantly affected the yield of coriander cultivars. The absence of “Year x Variety x Fertilizer Type” interactions for any of the noted parameters signaled that the detected “Variety x Fertilizer Type” interactions were constant regardless of the year factor. The recorded values of traits according to fertilizer sources different for the plant height from 61.85 to 69.67 cm, number of branches from 5.98 to 7.71 (piece/plant), number of umbels per the main umbel from 5.62 to 7.18 pieces, seed yield from 1.06 to 1.66 t/ha, the biological yield from 4.29 to 5.70 t ha−1, harvest index from 25.29 to 29.41%, essential oil ratio from 0.29 to 0.33%, and essential oil yield from 3.1 to 5.6 L ha−1. Erbaa variety was observed to be superior over the rest of the varieties producing the maximum values of 6.5 L ha−1 of essential oil, 0.36% essential oil content, 30.9% harvest index, 1.81 t/ha seed yield, and 5.9 t ha−1 biological yield with the treatment of chemical fertilizers.

scholarly journals Recent advances in CRISPR/Cas9 and applications for wheat functional genomics and breeding

aBIOTECH ◽  
2021 ◽  
Author(s):  
Jun Li ◽  
Yan Li ◽  
Ligeng Ma
Keyword(s):  
Functional Genomics ◽  
Genome Editing ◽  
Functional Annotation ◽  
Genome Engineering ◽  
Agronomic Traits ◽  
Wheat Breeding ◽  
Breeding Programs ◽  
Base Editing ◽  
The World ◽  
World Food Security

AbstractCommon wheat (Triticum aestivum L.) is one of the three major food crops in the world; thus, wheat breeding programs are important for world food security. Characterizing the genes that control important agronomic traits and finding new ways to alter them are necessary to improve wheat breeding. Functional genomics and breeding in polyploid wheat has been greatly accelerated by the advent of several powerful tools, especially CRISPR/Cas9 genome editing technology, which allows multiplex genome engineering. Here, we describe the development of CRISPR/Cas9, which has revolutionized the field of genome editing. In addition, we emphasize technological breakthroughs (e.g., base editing and prime editing) based on CRISPR/Cas9. We also summarize recent applications and advances in the functional annotation and breeding of wheat, and we introduce the production of CRISPR-edited DNA-free wheat. Combined with other achievements, CRISPR and CRISPR-based genome editing will speed progress in wheat biology and promote sustainable agriculture.

scholarly journals Genetic Variability, Correlation among Agronomic Traits, and Genetic Progress in a Sugarcane Diversity Panel

Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 533
Author(s):  
Fernanda Zatti Barreto ◽  
Thiago Willian Almeida Balsalobre ◽  
Roberto Giacomini Chapola ◽  
Antonio Augusto Franco Garcia ◽  
Anete Pereira Souza ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Agronomic Traits ◽  
Average Increase ◽  
Genetic Progress ◽  
Breeding Programs ◽  
Future Studies ◽  
Diversity Panel ◽  
Adjusted Means ◽  
Historical Series

Sugarcane breeding programs require 15 years of experimentation to create more productive cultivars, and estimates of genetic progress can indicate the efficiency of breeding programs. In this study, we used a diversity panel, the Brazilian Panel of Sugarcane Genotypes (BPSG), with the following objectives: (i) to estimate, through a mixed model, the adjusted means and genetic parameters of ten traits evaluated over three harvest years; (ii) to estimate genotypic correlation among those traits; and (iii) to estimate genetic progress over six decades of breeding. The heritabilities ranged from 0.43 to 0.88, and we detected 42 significant correlations, 9 negative and 33 positive. Over six decades, the sucrose-related traits BRIX, POL%C, and POL%J showed an average increase per decade of 0.27 °Brix (0.26% and 0.31%, respectively). Stalk number, height, and weight of the plot, and cane and sucrose yields revealed average increases per decade of 3.27 stalks, 0.06 m, 9.42 kg, 11.22 t/ha, and 2.08 t/ha, respectively. The genetic progress of the main agronomic traits is discussed through a historical series of sugarcane genotypes present in the BPSG. The findings of this study could contribute to the management of new breeding strategies and allow for future studies of associative mapping.

scholarly journals Canaryseed (Phalaris canariensis L.) accessions from nineteen countries show useful genetic variation for agronomic traits

2011 ◽  
Vol 91 (1) ◽  
pp. 37-48 ◽  
Author(s):  
M. Cogliatti ◽  
F. Bongiorno ◽  
H. Dalla Valle ◽  
W J Rogers
Keyword(s):  
Genetic Variation ◽  
Grain Yield ◽  
Harvest Index ◽  
Agronomic Traits ◽  
Grain Weight ◽  
Environment Interaction ◽  
Grain Number ◽  
Harvest Maturity ◽  
Phalaris Canariensis ◽  
Late Sowing

Fifty-seven accessions of canaryseed (47 populations and 10 cultivars) from 19 countries were evaluated for agronomic traits in four field trials sown over 3 yr in the province of Buenos Aires, Argentina. Genetic variation was found for all traits scored: grain yield and its components (grain weight, grain number per square meter, grain number per head and head number per square meter), harvest index, percent lodging, and phenological characters (emergence to heading, emergence to harvest maturity and heading to harvest maturity). Although genotype × environment interaction was observed for all traits, the additive differences between accessions were sufficient to enable promising breeding materials to be identified. Accessions superior in performance to the local Argentinean population, which in general gave values close to the overall mean of the accessions evaluated, were identified. For example, a population of Moroccan origin gave good yield associated with elevated values of the highly heritable character grain weight, rather than with the more commonly observed grain number per square meter. This population was also of relatively short stature and resistant to lodging, and, although it performed best when sown within the normal sowing date, tolerated late sowing fairly well. Other accessions were also observed with high grain weight, a useful characteristic in itself, since large grains are desirable from a quality point of view. Regarding phenology, the accessions showed a range of 160 degree days (8 calendar days in our conditions) in maturity, which, while not large in magnitude, may be of some utility in crop rotation management. Some accessions were well adapted to late sowing. Grain yield in general was strongly correlated with grain number per square meter. Principal components analysis (PCA) carried out for all characteristics provided indications of accessions combining useful characteristics and identified three components that explained approximately 70% of the phenotypic variation. Furthermore, a second PCA plus regression showed that approximately 60% of the variation in grain yield could be explained by a component associated with harvest index and grain number per square meter. Pointers were provided to possible future breeding targets.Key words: Phalaris canariensis, canaryseed, accessions, yield, phenology, genetics, breeding

scholarly journals Genetic characterization of the 28 maize landraces in Paraná State

2017 ◽  
Vol 38 (4) ◽  
pp. 1715 ◽  
Author(s):  
Sara Regina Silvestrin Rovaris ◽  
Pedro Mário de Araújo ◽  
Deoclécio Domingos Garbuglio ◽  
Cleber Vinicius Guiaretta de Azevedo ◽  
Cássio Egídio Cavenaghi Prete
Keyword(s):  
Recurrent Selection ◽  
Agronomic Traits ◽  
Block Design ◽  
Breeding Programs ◽  
Randomized Block Design ◽  
Fixed Model ◽  
Maize Landraces ◽  
Ear Height ◽  
Female Flowering

The characterization of maize landraces is extremely important in breeding programs for use of these genotypes as sources of genetic variability. The objective of this study was to quantitatively characterize 28 populations of maize landraces from the state of Paraná using the estimates of the effects of varieties and heterosis parents and the general combining ability, thereby assessing the main agronomic traits. In the crop of 2008/09, 56 inter-varietal hybrids, obtained through a topcross, 28 populations of maize landraces and three check varieties were evaluated for female flowering (FF), plant height (PH), ear height (EH) and grain mass (GY). The treatments were evaluated in a randomized block design, with two replications, at three Paraná State locations: the Experimental Center of the Agronomic Institute of Paraná in Londrina (IAPAR) and the experimental units of Pato Branco and Ponta Grossa. The data were submitted to an analysis of variance, considering a fixed model for genotypes and a random model for environments; the averages grouped by the Scott-Knott test, along with intersections of topcrosses, were analyzed according to a readapted model proposed by Oliveira et al. (1997). According to estimates of the parental effects, the GI 133 population showed the most promising estimates for all characteristics. The GI 088 and GI 173 populations stood out with promising estimates of the effects of heterosis. The conclusion is that the populations GI 133 and GI 173 may be indicated for recurrent selection programs or participation in obtaining composites.

scholarly journals Breeding programs for smallholder sheep farming systems: I. Evaluation of alternative designs of breeding schemes

2014 ◽  
Vol 131 (5) ◽  
pp. 341-349 ◽  
Author(s):  
S. Gizaw ◽  
B. Rischkowsky ◽  
A. Valle-Zárate ◽  
A. Haile ◽  
J.A.M. van Arendonk ◽  
...  
Keyword(s):  
Farming Systems ◽  
Breeding Programs ◽  
Breeding Schemes ◽  
Alternative Designs
Sign in / Sign up

Export Citation Format

Share Document