scholarly journals A novel three-point hitch dynamometer to measure the draft requirement of mounted implements

2011 ◽  
Vol 57 (No. 4) ◽  
pp. 128-136 ◽  
Author(s):  
M. Askari ◽  
M.H. Komarizade ◽  
A.M. Nikbakht ◽  
N. Nobakht ◽  
R.F. Teimourlou

An adjustable three-point hitch dynamometer with a draft capacity of 50 kN was developed to measure forces on the tractor and mounted implements. The design concept of the dynamometer was based on two linkage frames mounted between tractor links and the implement. The force sensing elements were comprised of a loadcell that was installed between the frames. The system provides variable width and height of the dynamometer links to satisfy a wide range of implement dimensions. All mounted tillage implements at categories II and III such as plows, cultivators and harrows were able to be tested by this dynamometer excluding mounted implements powered by power take-off (PTO). The dynamometer was calibrated and several field tests were conducted to measure the force required to pull a moldboard plow in a clay loam soil. The calibration showed a high degree of linearity between the draft requirements and the dynamometer outputs. Field tests showed that it was able to function effectively as intended without any mechanical problems.

2019 ◽  
Vol 99 (4) ◽  
pp. 575-578 ◽  
Author(s):  
J.J. Miller ◽  
M.L. Owen ◽  
X.M. Yang ◽  
C.F. Drury ◽  
W.D. Reynolds ◽  
...  

A 21 yr field study comparing zone tillage (ZT), no-tillage (NT), and moldboard plow tillage (MP) was used to elucidate tillage effects on soil hydrophobicity (SH) and soil water repellency index (RI) in a cool, humid clay loam soil in southwestern Ontario. The SH was 38% (P ≤ 0.05) greater for ZT and NT than MP, and it was similar between crop row (0.34) and crop inter-row (0.37) for ZT. The RI values were not different among tillage systems, or between the crop row versus crop inter-row positions under the three tillage systems.


2013 ◽  
Vol 33 (4) ◽  
pp. 772-781 ◽  
Author(s):  
Hugo González ◽  
Nelson L. Cappelli ◽  
Alejandro Toro

The wear resistance of rotary plows operating in a clay loam soil was studied. The degree of damage caused to the soil and the amount of mass lost by the tools were determined in order to establish correlations between the physical properties of the soil and the wear mechanisms acting on the tribosystem. Field tests were carried out in 12 plots and a randomized experimental design with 4 levels, 3 replicas per level and 2 passes per plot was applied. The levels relate to the tillage implements employed: rotary tiller, rotary power harrow, small motorized rotary tiller and control (unaltered soil). The highest mass losses were measured in rotary tiller and rotary power harrow's tools, while the small motorized rotary tiller's tools showed generally lower levels of damage. It was determined that the effective contact time between tool and soil, the rotating speed and the sudden impact forces are the most significant factors affecting the wear resistance in field operations. Thirty days after tillage operation the soil samples were taken from each plot at a mean depth of 100 mm in order to determine bulk density, gravimetric moisture content and percentage of aggregates smaller than 5 mm. No significant differences among the values of these properties were found in the experiments. The wear mechanisms acting on the tools' surface are complex and include 2-body and 3-body abrasion as well as the presence of sudden impact forces.


Author(s):  
Mohammed Aajmi Salman ◽  
Jawad A. Kamal Al-Shibani

Beneficial microorganisms play a key role in the availability of ions minerals in the soil and use Randomized Complete Block Desing ( R.C.B.D ). The objective of this paper to the study effect of the of biofertilizer and miniral treatments on availability of NPK for crop corn zea mays L.Two types of biofertilizer are Bacterial Bacillus subtilis and Fungal Trichoderma harianum. Three levels of potassium fertilizer are (2.9533, 0.4000 and 2.9533). A field experiment in fall season of 2018 Has been conducted in silty clay loam soil. The experimental Results indicated that Bacillus and Trichoderma inoculation separately or together Have made a significant effect to increase in the availability of N P K in the soil compare to other treatments. The grain yield is where (2.9533, 0.4000 and 2.9533) of bacterial and fungal bio-fertilizer and potassium fertilizers respectively as compared to the control.


2012 ◽  
Vol 2 (2) ◽  
pp. 374-375
Author(s):  
Asha Buliya ◽  
◽  
K. C. Pancholi K. C. Pancholi ◽  
R. K. Paliwal R. K. Paliwal

2020 ◽  
Vol 8 (6) ◽  
pp. 1038-1041
Author(s):  
C Bharathi ◽  
P Murali Arthanari ◽  
C Chinnusamy

MethodsX ◽  
2021 ◽  
pp. 101476
Author(s):  
Andrea Acosta-Dacal ◽  
Cristian Rial-Berriel ◽  
Ricardo Díaz-Día ◽  
María del Mar Bernal-Suárez ◽  
Manuel Zumbado ◽  
...  

2021 ◽  
Vol 14 (4) ◽  
Author(s):  
Haroon Shahzad ◽  
Muhammad Iqbal ◽  
Noman Latif ◽  
Muhammad Arshad Khan ◽  
Qudrat Ullah Khan

1965 ◽  
Vol 65 (2) ◽  
pp. 195-200 ◽  
Author(s):  
F. V. Widdowson ◽  
A. Penny

The experiment testing N residues (made on a clay-loam soil) clearly showed that N applied for potatoes benefited the following wheat crop, but that N applied for wheat benefited the following potato crop little. There were no worth-while 1. An experiment on a clay-loam soil measured responses to three amounts of nitrogen on alternate crops of wheat and potatoes; these dressings were tested in all combinations with three rates of N applied 1 and 2 years previously. Nitrogen applied for potatoes consistently increased yields of following wheat. The residue from applying 1·5 cwt. N/acre for potatoes was equivalent to topdressing the wheat with 0·55 cwt. N/acre; the value of the residue was decreased by applying N to the wheat. Potato yields were increased little by applying N to the preceding wheat crop and the residues were of little significance when compared with the responses to new N. There was no gain from N applied 2 years previously for either crop.


Sign in / Sign up

Export Citation Format

Share Document