12. Hydraulic model studies of the rising sector gate conducted at Imperial College

1977 ◽  
pp. 143-152
Author(s):  
J. D. Hardwick
Keyword(s):  
Hydraulic Model ◽  
Imperial College ◽  
Model Studies

Functional design of a swim basin in the Detroit River

1988 ◽  
Vol 15 (6) ◽  
pp. 1006-1014
Author(s):  
H. R. Patterson ◽  
N. K. Becker ◽  
J. A. McCorquodale
Keyword(s):  
Precast Concrete ◽  
Hydraulic Model ◽  
Fecal Coliforms ◽  
Functional Design ◽  
Detroit River ◽  
Design Concepts ◽  
Model Studies ◽  
Concrete Cylinders ◽  
Filter Water ◽  
Peak Summer

Many urban beaches on fresh water lakes and rivers face closure during peak summer periods due to dangerous concentrations of fecal coliforms and other waterborne contaminants. One such example is the Lake Erie Metro Park which is located approximately 22 km (14 miles) downriver of Detroit, Michigan, and Windsor, Ontario, at the mouth of the Detroit River.N.K. Becker & Associates Ltd. was retained in 1985 to research and develop a functional design for a swim basin that will be formed by cordoning off an area of the Detroit River with a breakwater. A unique feature of this breakwater is that it is being designed to filter water from the Detroit River to the extent required for safe swimming. When it is constructed in 1988, it will be capable of accommodating approximately 1500 swimmers.Extensive hydraulic model studies were carried out at the universities of Windsor and Michigan to research and develop a functional design for this facility. The methodology used to develop the design concepts for this swim basin as well as the results of the testing program are described in this paper. Key words: fecal coliforms, swim basin, sand filter, breakwater, hydraulic model, beach, circulation, waves, water deficit, precast concrete cylinders.

HYDRAULIC MODEL STUDIES FOR MYNTDU (LESHKA) DAM SPILLWAY, MEGHALAYA

2010 ◽  
Vol 16 (1) ◽  
pp. 93-108
Author(s):  
Amit Kulhare ◽  
V. S. Rama Rao ◽  
M. R. Bhajantri ◽  
P. C. Pethe
Keyword(s):  
Hydraulic Model ◽  
Model Studies

Hydraulic Model and Numerical Simulation Study of Shuangwangcheng Pump Station

2011 ◽  
Vol 117-119 ◽  
pp. 647-651
Author(s):  
Chuan Qi Li ◽  
Wei Wang ◽  
Jie Gong ◽  
Xin Lai Zhao
Keyword(s):  
Numerical Simulation ◽  
Physical Model ◽  
Model Test ◽  
Hydraulic Model ◽  
Physical Model Test ◽  
Flow Conditions ◽  
Scheme Design ◽  
Model Studies ◽  
Pump Station ◽  
Good Agreement

Physical and numerical model studies were performed in order to study the flow conditions for the proposed pump station of Shuangwangcheng reservoir, Shouguang Ctiy. The flow velocity and the pressure distribution in the bidirectional culvert of Shuangwangcheng Pump Station had been obtained by hydraulic model test and numerical simulation. The physical model was constructed to a Froude scale of 1:20. A general conclusion was that, the computed results were good agreement with the data measured in physical model, and could be good complement for physical model test. Furthermore, negative pressure existing in discharge steep culvert in the initial scheme design was eliminated by moving the culvert controlling gate to the end of culvert in the modified scheme, and the flow conditions was improved.

Sault Ste. Marie Lock reconstruction: hydraulic model studies of the stop log emergency closure and lock filling and emptying systems

1998 ◽  
Vol 25 (6) ◽  
pp. 1003-1040 ◽  
Author(s):  
Graham K Holder
Keyword(s):  
Hydraulic Model ◽  
Safety Device ◽  
Model Studies ◽  
The Third ◽  
Lock Chamber ◽  
Emergency Stop ◽  
Dry Dock ◽  
Web Plates ◽  
Uplift Forces ◽  
Selection Of

In July 1987, a section of the southwest wall of Sault Ste. Marie Lock failed during a locking operation when a portion of limestone facing, 60 m by 8 m, separated from the rubble backing wall. Engineering investigations resulted in the selection of the Recreational Lock Option, involving either downsizing the lock chamber within the existing lock or constructing a new lock as the most viable solutions. A Dry Dock Option, where the lock would be used to store craft during the winter months, was also considered. However, this option was abandoned during the course of testing. The engineering investigations also revealed that the emergency swing dam, constructed upstream of the existing lock to protect the system should the lock gates be damaged or carried away (as happened in 1909), was in poor condition and required rehabilitation in the order of over $0.5 million. A stop log emergency system was proposed as an alternative safety device designed to stop the flow of water through the canal in the event of gate failure. Physical hydraulic model studies were carried out to evaluate the feasibility of using an emergency stop log system. The tests showed that stop logs constructed with solid horizontal web plates top and bottom result in unacceptably high hydraulic downpull forces. Open truss stop logs can be deployed to stop the flow of water through the canal in the event of gate failure. The follower should also be constructed as an open truss such that the areas of steel exposed to the flow at the top and bottom of the follower are minimized. Hydraulic uplift forces that could prevent closure can be reduced by increasing the space between the stop log and the follower. Physical hydraulic model studies of the lock filling-emptying systems are described. The first and preferred option consists of downsizing the existing lock and retaining part of the existing wooden culverts and emptying system, if possible. A new filling port, filling valves, and supply culvert would be constructed upstream. In the event that the existing wooden culverts are found to be unserviceable, a second option was considered. This second option would be to fill in the wooden culverts and then construct a new filling port, filling valves, and supply culvert that would discharge into the lock through the upstream breast wall just above floor level. The existing emptying system would be retained or rebuilt. The third option, if both the filling and discharge culverts have to be condemned, would be to build a new lock. The results of the hydraulic model studies carried out to explore these three options are described.Key words: emergency closure, stop logs, follower, canal, lock, downpull, uplift, crane capacity, filling-emptying system, culverts.

Sign in / Sign up

Export Citation Format

Share Document