Non-linear finite-element analysis of punching capacities of steel–concrete bridge deck slabs

2012 ◽  
Vol 165 (5) ◽  
pp. 255-269 ◽  
Author(s):  
Yu Zheng ◽  
Des Robinson ◽  
Su Taylor ◽  
David Cleland
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bridge Deck ◽  
Concrete Bridge ◽  
Element Analysis ◽  
Linear Finite Element ◽  
Deck Slabs ◽  
Non Linear ◽  
Bridge Deck Slabs ◽  
Concrete Bridge Deck

Performance evaluation of innovative concrete bridge deck slabs reinforced with fibre-reinforced-polymer bars

2007 ◽  
Vol 34 (3) ◽  
pp. 298-310 ◽  
Author(s):  
Brahim Benmokrane ◽  
Ehab El-Salakawy ◽  
Amr El-Ragaby ◽  
Sherif El-Gamal
Keyword(s):  
Bridge Deck ◽  
Field Testing ◽  
Concrete Bridge ◽  
Element Analysis ◽  
Reinforced Polymer ◽  
Deck Slabs ◽  
Bridge Deck Slabs ◽  
Fibre Reinforced Polymer ◽  
Concrete Bridge Deck ◽  
Frp Bars

This paper presents the construction details, field testing, and analytical results of six innovative concrete bridges reinforced with fibre-reinforced-polymer (FRP) bars recently constructed in North America, namely Wotton, Magog, Cookshire-Eaton, Val-Alain, and Melbourne bridges in Quebec, Canada, and Morristown bridge in Vermont, USA. All six bridges are girder type, with main girders made of either steel or prestressed concrete. The main girders are supported over spans ranging from 26.2 to 50.0 m. The deck is a 200–230 mm thick concrete slab continuous over spans of 2.30–3.15 m. Different types of glass- and carbon-FRP reinforcing bars and conventional steel were used as reinforcement for the concrete deck slab. The six bridges are located on different highway categories, which means different traffic volume and environmental conditions. The bridges are well instrumented at critical locations for internal temperature and strain data collection using fibre optic sensors. These sensors are used to monitor the deck behaviour from the time of construction to several years after the completion of construction. The bridges were tested for service performance using calibrated truckloads. In parallel, a finite element analysis (FEA) was conducted and verified against the results of the field load tests. The FEA was then used to run parametric studies to investigate the effect of several important parameters such as FRP reinforcement type and ratio on the service and ultimate behaviour of these bridge decks. The analytical and field results under real service conditions, in terms of deflections, cracking, and strains in reinforcement and concrete, were comparable to those of concrete bridge deck slabs reinforced with steel.Key words: bridges deck slabs, fibre-reinforced-polymer (FRP) bars, field testing, finite element analysis.

Specimen positioning effect on microshear test: Non-linear finite element analysis

2012 ◽  
Vol 28 ◽  
pp. e15-e16
Author(s):  
L.H.A. Raposo ◽  
L.C.M. Dantas ◽  
T.A. Xavier ◽  
A.G. Pereira ◽  
A. Versluis ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Analysis ◽  
Linear Finite Element ◽  
Non Linear
Sign in / Sign up

Export Citation Format

Share Document