Engineering properties of clayey soil stabilised with alkali-activated slag

2019 ◽  
pp. 1-12 ◽  
Author(s):  
Saeid Davari Algoo ◽  
Tohid Akhlaghi ◽  
Masoud Ranjbarnia
Keyword(s):  
Clayey Soil ◽  
Engineering Properties ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Alkali Activated

scholarly journals Effect of Polypropylene Fiber on Properties of Alkali-Activated Slag Mortar

2020 ◽  
Vol 2020 ◽  
pp. 1-12 ◽  
Author(s):  
Yangchen Xu ◽  
Haiming Chen ◽  
Pengju Wang
Keyword(s):  
Water Absorption ◽  
Setting Time ◽  
Impact Resistance ◽  
Polypropylene Fiber ◽  
Engineering Properties ◽  
Alkali Activated Slag ◽  
Initial Setting Time ◽  
Initial Setting ◽  
Activated Slag ◽  
Alkali Activated

Alkali-activated slag (AAS) is becoming an increasingly popular building material due to its excellent engineering properties and low CO2 emissions, but its large shrinkage is an important reason to restrict its application and popularization. This work is aimed to study the possibility of inhibiting the shrinkage of AAS mortar by incorporating polypropylene fiber (PPF). For this, an experimental study was carried out to evaluate the effects of PPF content on setting time, fluidity, physical properties, mechanical properties, impact resistance, and microstructure of AAS mortar. The volume content of PPF is 0.05%, 0.1%, 0.15%, and 0.2%. The working, physical (porosity, water absorption, and bulk density), mechanical, shrinkage, and impact resistance properties of the AAS mortars were evaluated. The results show that incorporating PPF effectively reduces the shrinkage deformation of AAS mortar, significantly improves its impact resistance, enhances its toughness, and slightly improves its compressive strength in the later stage. At the same time, PPF delays the initial setting time of AAS mortar and reduces the fluidity, density, porosity, and water absorption of AAS mortar. SEM results show that the bridging effect of PPF between AAS mortars can inhibit the generation and propagation of cracks, improve the internal microstructure, and enhance the performance of AAS mortar.

scholarly journals Clayey Soil Strength Improvement by Using Alkali Activated Slag Reinforcing

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1076
Author(s):  
Darius Žurinskas ◽  
Danutė Vaičiukynienė ◽  
Gediminas Stelmokaitis ◽  
Viktoras Doroševas
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Clayey Soil ◽  
Fluorescence Analysis ◽  
Friction Angle ◽  
Soil Strength ◽  
Alkali Activated Slag ◽  
X Ray ◽  
Activated Slag ◽  
Alkali Activated

There are many studies related to using alkali activated binders for the improvement of clayey soil mechanical properties. In this study, alkali activated slag (AAS) for the improvement of clayey soil strength was used and it reinforced the clay. This paper presents results of an investigation on the utilization of ground-granulated blast-furnace slag in the reinforcement of clay soils. Therefore, significant cost savings could be achieved by using alkali activated slag as binding material. These samples were analyzed by X-Ray fluorescence analysis (XRF), X-Ray diffraction (XRD), scanning electron microscopy (SEM) and strength tests after the curing. The clay samples reinforced with AAS showed higher shear stress, cohesion and internal friction angle compared with the samples without reinforcement. The highest shear strength was achieved by using the highest amount of AAS (30%). This shear stress of the unreinforced clay samples could be increased from 63.2 to 137.4 kPa (117.4%) and from 123.2 to 257.4 kPa (108.9%) when the normal stress value of 100 and 500 kPa was used, respectively. The increase in shear strength is closely related to the compact contact zone between AAS and clay. Moreover, the new formed cementitious compounds of AAS had a positive influence on the shear strength of samples as well.

scholarly journals Effect of Dosage of Alkaline Activator on the Properties of Alkali-Activated Slag Pastes

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Zhenzhen Jiao ◽  
Ying Wang ◽  
Wenzhong Zheng ◽  
Wenxuan Huang
Keyword(s):  
Compressive Strength ◽  
Room Temperature ◽  
Setting Time ◽  
Drying Shrinkage ◽  
Engineering Properties ◽  
Alkali Activated Slag ◽  
Alkaline Activator ◽  
Activated Slag ◽  
Good Workability ◽  
Alkali Activated

This study focused on the engineering properties of alkali-activated slag (AAS) pastes prepared by mixing an activator consisting of sodium silicate and sodium hydroxide at room temperature. The water-to-slag ratio of AAS paste was kept constant at 0.35 by mass. AAS pastes were prepared using the activator with five different silicate moduli of 1, 1.2, 1.4, 1.6, and 1.8 and three different Na2O contents of 6%, 8%, and 10%. The results showed that both the silicate moduli and Na2O contents had significant effects on the engineering properties of AAS pastes. All the AAS pastes exhibited properties such as fast setting, good workability, and high early compressive strength. The final setting time varied from 9 to 36 min, and the fluidity was in the range of 147–226 mm. The 1 d compressive strength of all the AAS pastes, which could be easily achieved, had values above 55 MPa, whereas the highest strength obtained was 102 MPa with the silicate modulus of 1 and Na2O content of 8% at room temperature. The drying shrinkage increased as the silicate modulus increased. Furthermore, the hydration products and microstructures of AAS pastes were explained according to the microanalysis methods.

scholarly journals Effect of Internal Curing by Super Absorbent Polymer on the Autogenous Shrinkage of Alkali-Activated Slag Mortars

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4318
Author(s):  
Pengju Wang ◽  
Haiming Chen ◽  
Peiyuan Chen ◽  
Jin Pan ◽  
Yangchen Xu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Setting Time ◽  
Autogenous Shrinkage ◽  
Internal Curing ◽  
Engineering Properties ◽  
Super Absorbent Polymer ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Absorbent Polymer ◽  
Alkali Activated

Alkali activated slag (AAS) mortar is becoming an increasingly popular green building material because of its excellent engineering properties and low CO2 emissions, promising to replace ordinary Portland cement (OPC) mortar. However, AAS’s high shrinkage and short setting time are the important reasons to limit its wide application in engineering. This paper was conducted to investigate the effect of internal curing(IC) by super absorbent polymer (SAP) on the autogenous shrinkage of AAS mortars. For this, an experimental study was carried out to evaluate the effect of SAP dosage on the setting time, autogenous shrinkage, compressive strength, microstructure, and pore structure. The SAP were incorporated at different dosage of 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 percent by weight of slag. The workability, physical (porosity), mechanical, and shrinkage properties of the mortars were evaluated, and a complementary study on microstructure was made. The results indicated that the setting time increased with an increase of SAP dosage due to the additional activator released by SAP. Autogenous shrinkage decreased with an increase of SAP dosage, and was mitigated completely when the dosage of SAP ≥ 0.2% wt of slag. Although IC by means of SAP reduced the compressive strength, this reduction (23% at 56 days for 0.2% SAP) was acceptable given the important role that it played on mitigating autogenous shrinkage. In the research, the 0.2% SAP dosage was the optimal content. The results can provide data and basis for practical application of AAS mortar.

Sign in / Sign up

Export Citation Format

Share Document