Determination of the coefficient of thermal expansion of high performance concrete from initial setting

10.1617/13684 ◽  
2001 ◽  
Vol 35 (245) ◽  
pp. 35-41 ◽  
Author(s):  
H. Kada
Keyword(s):  
Thermal Expansion ◽  
High Performance ◽  
High Performance Concrete ◽  
Coefficient Of Thermal Expansion ◽  
Initial Setting

Bestimmung der Dauerhaftigkeit von Hochleistungsbeton mit Hilfe des CDF-Tests / Determination of the durability of high performance concrete by means of CDF-test

1999 ◽  
Vol 5 (1) ◽  
pp. 29-40
Author(s):  
R. Krumbach ◽  
U. Schmelter ◽  
K. Seyfarth
Keyword(s):  
Frost Resistance ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Strength Concrete ◽  
Factors Influencing

Abstract Variable obsen>ations concerning frost resistance of high performance concrete have been made. The question arises which are the decisive factors influencing durability under the action of frost and de-icing salt. The proposed experiments are to be carried out in cooperation with F.A.- Finger - Institute of Bauhaus University Weimar. The aim of this study is to determine possible change of durability of high strength concrete, and to investigate the origin thereof. Measures to reduce the risk of reduced durability have to be found.

Autogenous Shrinkage in Plain Cement Mixtures

2008 ◽  
Vol 400-402 ◽  
pp. 137-143 ◽  
Author(s):  
Vinod Rajayogan ◽  
Obada Kayali
Keyword(s):  
Experimental Determination ◽  
High Performance ◽  
High Performance Concrete ◽  
Autogenous Shrinkage ◽  
Basic Mechanism ◽  
Realistic Model ◽  
Test Method ◽  
Ongoing Research ◽  
Cement Mixtures

Determination of a realistic model for the estimation of autogenous shrinkage in plain cement mixtures has been an ongoing research among researchers in high performance concrete. While no standard test method exists for the determination of autogenous shrinkage, various researchers have designed different test methods for measurement of autogenous shrinkage. Current study involved the experimental determination of autogenous shrinkage using the test method developed by O.M.Jensen and co-workers, complimented with non-contact eddy current sensors. Measurements were conducted from as early as 1.5 hours from the time of casting. The samples were placed in a constant temperature chamber and the temperature of the sample was also monitored using a thermocouple. The study was carried out on plain cement mixtures at three water cement ratios of 0.25, 0.32 and 0.38. Measurements were also conducted on simple sealed prismatic samples but these measurements could only be collected after 24 hours of casting. The work is supplemented with CEMHYD3D simulations of the samples at similar water-cement ratios under sealed conditions so as to understand the development of the microstructure of the cement responsible for autogenous shrinkage. While experimental determination of internal relative humidity is quite difficult, data regarding chemical shrinkage, amount of water left and the development of the discontinuous capillary network from the simulations help to understand the determined experimental values of autogenous shrinkage. A detailed explanation on the causes of autogenous shrinkage and the basic mechanism responsible for it has been presented.

Sign in / Sign up

Export Citation Format

Share Document