ON DETERMINATION OF THE HEAT TRANSFER COEFFICIENT IN SIMULTANEOUS CONDUCTIVE AND CONVECTIVE HEAT TRANSFER

2019 ◽  
Author(s):  
A. V. Luikov ◽  
T. L. Perelman ◽  
V.B. Ryvkin
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
The Heat Transfer Coefficient

Effect of nanoparticle diameter on the forced convective heat transfer of nanofluid (water + Al2O3) in the fully developed laminar region

2014 ◽  
Vol 05 (03) ◽  
pp. 1450008 ◽  
Author(s):  
Seyyed Shahabeddin Azimi ◽  
Mansour Kalbasi ◽  
Mohammad Hosain Namazi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Quantitative Characteristic ◽  
Solid Particles ◽  
Nanoparticle Size ◽  
Forced Convective Heat Transfer ◽  
The Heat Transfer Coefficient

Nanofluid is a suspension of nanoparticles (solid particles with diameters below 100 nm) in a conventional base fluid with significantly improved heat transfer characteristics compared to the original fluid. The heat transfer coefficient is a quantitative characteristic of the convective heat transfer. The purpose of this paper is to study the effect of the nanoparticle size (diameter) on the heat transfer coefficient of forced convective heat transfer of nanofluid in the fully developed laminar region of a horizontal tube. Using thermal conductivity model which is a function of the nanoparticle size, flow of a nanofluid (water + Al 2 O 3) in a circular tube submitted to a constant wall temperature is numerically investigated with two particle sizes of 11 nm and 47 nm. The calculated results show that the nanoparticle size does not significantly affect the heat transfer coefficient, however, the heat transfer coefficient decreases as the particle size increases.

scholarly journals Intensified Thermal Conductivity and Convective Heat Transfer of Ultrasonically Prepared CuO–Polyaniline Nanocomposite Based Nanofluids in Helical Coil Heat Exchanger

2019 ◽  
Vol 64 (2) ◽  
pp. 271-282 ◽  
Author(s):  
Abhishek Lanjewar ◽  
Bharat Bhanvase ◽  
Divya Barai ◽  
Shivani Chawhan ◽  
Shirish Sonawane
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Base Fluid ◽  
Cuo Nanoparticles ◽  
The Heat Transfer Coefficient

In this study, investigation of convective heat transfer enhancement with the use of CuO–Polyaniline (CuO–PANI) nanocomposite basednanofluid inside vertical helically coiled tube heat exchanger was carried out experimentally. In these experiments, the effects of different parameters such as Reynolds number and volume % of CuO–PANI nanocomposite in nanofluid on the heat transfer coefficient of base fluid have been studied. In order to study the effect of CuO–PANI nanocomposite based nanofluid on heat transfer, CuO nanoparticles loaded in PANI were synthesized in the presence of ultrasound assisted environment at different loading concentration of CuO nanoparticles (1, 3 and 5 wt.%). Then the nanofluids were prepared at different concentrations of CuO–PANI nanocomposite using water as a base fluid. The 1 wt.% CuO–PANI nanocomposite was selected for the heat transfer study for nanofluid concentration in the range of 0.05 to 0.3 volume % and Reynolds number range of was 1080 to 2160 (±5). Around 37 % enhancement in the heat transfer coefficient was observed for 0.2 volume % of 1 wt.% CuO–PANI nanocomposite in the base fluid. In addition, significant enhancement in the heat transfer coefficient was observed with an increase in the Reynolds number and percentage loading of CuO nanoparticle in Polyaniline (PANI).

Sign in / Sign up

Export Citation Format

Share Document